Horizontalni obdelovalni centri od 1200 mm X-hoda naprej nakup rabljenega (65)

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, Offered here is a horizontal machining center from manufacturer Mori Seiki, model NH 8000 DCG. The machine is in good condition and can be inspected on site. Manufacturer: Mori Seiki Model: NH 8000 DCG Year of manufacture: 2008 Control: Fanuc MSX-701III Technical specifications: Travel distances: X-axis: 1400 mm Y-axis: 1200 mm Z-axis: 1350 mm B-axis rotary table: 360° in 0.001° increments automatic tool changer with 60 tool stations Tool holder: HSK 100 Gjdpfoqu T N Asx Ab Tskf Dual pallet changer Pallet size: 800 mm x 800 mm Max. tool length: 800 mm Max. tool weight: 30 kg Spindle power: 37 kW Max. spindle speed: 8,000 rpm High-pressure through-spindle coolant system (IKZ).

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A.1003260.01, Machine Designation Machining Centre Manufacturer Hueller Hille Model NBH230 Year of Manufacture 2009 Serial Number A.1003260.01 Control Sinumerik 840D Travel Paths X-Axis 1200 mm Y-Axis 800 mm Z-Axis 1200 mm Tool Holder HSK100 Spindle Speed 10,000 rpm Feed Rate (X-Y-Z Axes) 1–60,000 mm/min Rapid Traverse (X-Y-Z Axes) 60 m/min Rapid Traverse (B-Axis) 15 rpm Pallet Size 630 x 800 mm NC Rotary Table 0.001° Tool Magazine 3 cassettes, 50 tools each Gkedpfewpi Ucsx Ab Tsf Position Measuring System Direct, with incremental scale Positioning Uncertainty 0.007 mm Position Deviation 0.004 mm Tool Change Time 2.5–4.5 sec Chip-to-Chip Time approx. 6.2 sec Pallet Change Time 14.5–17 sec Connected Load 69 kW Compressed Air System 5 bar Coolant System Capacity approx. 1,250 l Chip Conveyor with Inclined Discharge 1,200 mm height

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Gedsvgxfyopfx Ab Tokf Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 27.300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 46750012, potovalna razdalja osi X: 800 mm, pomik osi Y: 750 mm, pomik po osi Z: 750 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, hitrost pomika os X: 40 m/min, hitrost podajanja osi Y: 40 m/min, hitrost podajanja os Z: 40 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: 31i, teža obdelovanca (maks.): 600 kg, širina mize: 500 mm, dolžina mize: 500 mm, obremenitev mize: 600 kg, skupna masa: 16.000 kg, hitrost vretena (min.): 10.000 obr/min, dovod hladilne tekočine: 70 letvica, nos vretena: BT50, Oprema: transportni trak za ostružke, Used Horizontal Machining Center Manufacturer: NIIGATA Model: SPN503 Control: Fanuc 31i S/N: 46750012 Condition: Used (approx. 27,300 operating hours) Year of manufacture: 2015 Location: Magdeburg Niigata SPN503 with linear guides in the following specification: Technical Data: • Control panel on the left • Pallet size: 500 x 500 mm • High table load capacity: 600 kg • B-axis with 1-degree incremental input • Spindle speed: 10,000 rpm • Front bearing (inner diameter): 90 mm • Drive power: 30/25 kW • Spindle mounting: BT50 • Magazine with 62 tool positions • Two internal chip conveyor screws • Manual pulse generator for manual movement • CE specification FANUC Functions: • Fanuc 31i-B with 10.4" LCD and keypad • Inch/metric conversion • Helical interpolation • Programmable data input (G10) • Custom Macro B • Rigid tapping • Tool offset memory type C • Background editing • Ethernet interface (10 Mbit/s) Additional Features: Direct position measurement system (linear scales) X, Y, Z axes C-table with 0.001° incremental input and position measuring system Gkjdpowm E Dhsfx Ab Tef Additional custom macro variables (500) Additional data fields (#100 and #500) 48 additional zero offset positions Preparation for internal coolant supply up to 70 bar KNOLL KF400/1700 70 bar, 1 pressure stage (24V) / PQ-Tronic KF400 compact filter Fleece installation top of coolant tank FKA 1700 Capacity 1,700 l Mounts for max. 2 low-pressure pumps Mount for max. 1 high-pressure pump Connection for through-flow chiller

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, CNC FANUC 0i - TC Osi X, Y, Z: 1630, 762, 650 Hitri pomik X – 30, Y – 30, Z – 24 m/min Velikost mize: 1630 x 760 mm Nosilnost mize: 1300 kg Vretenasti konus: SK40 Hitrost vretena: 12.000 min⁻¹ (vrt./min) Orodni magazin: 30 orodij Zbiralnik za odrezke Godpfjqzhfxox Ab Tskf Linearno vodilo na vseh oseh (valjčna vodila) Hladilne šobe na nosu vretena Elektronski ročni kolesni upravljalnik (prenosljiv) za 3 osi Signalna luč s tremi barvami Dodatna oprema: hladilni sistem s črpalkami, hladilnik vretena, ročno kolesce, transformator, 1x komplet dokumentacije

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Horizontal Machining Center Starrag-Heckert HEC 1600 Athletic Gkedpjguk I Iofx Ab Tef In operational, ready-to-use condition Pallet size: 1250 x 1600 mm Maximum pallet load: 8,000 kg Number of pallets: 25 pcs (Fastems system) Table indexing: B-axis 0.001° X-axis traverse: 2,800 mm Y-axis (spindle vertical): 2,200 mm Z-axis (column longitudinal):2,100 mm W-axis (boring spindle axial): 740 mm Feed rate X/Y/Z: 1 – 40,000 mm/min Rapid traverse X/Y/Z: 40 m/min Rotary table speed: 8 rpm Maximum swivel diameter:3,000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle drive motor: 37 kW Spindle speed: 20 – 2,500 rpm Boring spindle diameter:150 mm ATC: 80-tool magazine CNC control: Siemens Sinumerik 840D Operating Hours Spindle: 21,400 hours Accessories - Hexagon wireless measuring probe - Coolant unit with vacuum rotary filtration system - High-pressure coolant through spindle - Electrically operated clear-view window (Visiport) - Laser tool breakage detection in work area - Cylindrical path interpolation - Tool and process monitoring system – ARTIS Machine without Fastems = without pallet changers. - Pallet changer unit available from Starrag Heckert as an option. Year of manufacture: 2007 (See also other listings from this seller)

Stanje: rabljeno, Leto izdelave: 1981, številka stroja/vozila: 78.977, Oprema: dokumentacija / priročnik, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control system: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speed: I gear range: 3 - 202 rpm II gear range: 180 - 808 rpm X-travel: 12,000 mm Y-travel: 4,500 mm Z-travel: 2,400 mm (quill □ 520 mm / travel 1,200 mm + W axis 1,200 mm) Taper: SK60 (SK50) Facing slide: yes Milling heads: 2 units Godpfsqc Umgsx Ab Tekf Preparation for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Video available!

Stanje: dober (rabljeno), potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 1.400 mm, Manufacturer: DMG MORI Model: DMC 160H duoBLOCK Control: Siemens 840D Solution Line Year of manufacture: 2014 Gkjdpov A Uvtefx Ab Tef Workpiece capacity up to 1530 x 1295 mm and 3500 kg Tool length up to 650 mm, max. 30 kg Tool size up to 400 x 250 mm, max. 30 kg Extended feed force up to 15 kN (100% duty cycle) Coolant filtration system Equipment: - BLUM Laser NT - 3D Quick Set - MPC Protection - 3D measuring probe - DXF import Tool package: 180 tools, HSK-100A 2 x cast iron angle plates, 1500 mm 15,000 spindle hours One-owner machine Specifications: Metric / US Standard X-axis travel: 1600 mm Y-axis travel: 1100 mm Z-axis travel: 1400 mm B-axis indexing: 360,000° Table length: 1250 mm Table width: 1000 mm Table load capacity: 3000 kg Number of pallets: 2 Rapid traverse X-axis: 60,000 mm/min Rapid traverse Y-axis: 60,000 mm/min Rapid traverse Z-axis: 60,000 mm/min Tool interface: HSK-100 ISO/Bt/Mk Spindle power: 52 kW Spindle speed: 12,000 rpm Tool changer: 180 positions Number of controlled axes: 4 Dimensions (approx.): Length: 9,170 mm Width: 6,320 mm Height: 3,969 mm Weight: 39,500 kg Please note: The information provided on this page has been compiled to the best of our knowledge, using data from ourselves and, where possible, the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no warranties or contractual terms are implied. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, CNC FUSION 640 M, 2 pallets 1000 x 1000 mm, 360,000 positions, travels 1700 x 1400 x 1400 mm, spindle 7000 rpm BT 50, 80-tool magazine, Renishaw, CONCEP chip conveyor, tooling Gedpfjk Itz Djx Ab Tekf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.270 mm, pomik osi Y: 1.020 mm, pomik po osi Z: 920 mm, hitro pomikanje X-os: 18 m/min, hitri pomik os Y: 18 m/min, hitri pomik na osi Z: 18 m/min, dolžina podajanja os X: 1.270 mm, dolžina pomika po osi Y: 1.020 mm, dolžina podajanja os Z: 920 mm, hitrost pomika os X: 4 m/min, hitrost podajanja osi Y: 4 m/min, hitrost podajanja os Z: 4 m/min, proizvajalec krmilnikov: Fanuc, model krmilnika: 160 iMA, skupna dolžina: 550 mm, skupna širina: 100 mm, širina mize: 800 mm, dolžina mize: 800 mm, obremenitev mize: 1.500 kg, največja hitrost vretena: 6.000 obr/min, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 25.000 W, nos vretena: 50, število mest v zalogovniku orodij: 178, dolžina orodja: 550 mm, premer orodja: 100 mm, teža orodja: 30 g, Oprema: transportni trak za ostružke, Znamka: NIGATA Model: HN-80-C Leto izdelave: 1999 Krmiljenje: Fanuc 160 iMA Podatki: Št. palet: 2 kos Velikost palete: 800 x 800 mm Nosilnost palete: 1.500 kg Indeksacija palete: 0,001° Pomiki X/Y/Z: 1.270/1.020/920 mm Pomiki X/Y/Z: 1-4.000 mm/min Gjdpfx Aboxdb Nfo Tjkf Hitri pomiki X/Y/Z: 18 m/min Vreteno stožec: ISO-50 Moč vretena: 25 kW Hitrost vretena: 6.000 vrt/min Število orodij v magazinu: 178 kos Orodni stožec: MAS BT-50 Premer orodja min/max: 100/240 mm Dolžina orodja: 550 mm Največja teža orodja: 30 kg Čas menjave orodja: 10 s Mere stroja DxŠxV: 5.900 x 8.100 x 3.750 mm Teža stroja: 20 t Oprema: Transporter za ostružke, Hlajenje skozi vreteno 20 bar, Detekcija rezne sile

Stanje: dober (rabljeno), Leto izdelave: 1997, obratovalne ure: 9.350 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.530 mm, pomik osi Y: 1.220 mm, pomik po osi Z: 1.140 mm, proizvajalec krmilnikov: Fanuc 15M, teža obdelovanca (maks.): 2.000 kg, skupna višina: 3.930 mm, skupna dolžina: 7.760 mm, skupna širina: 4.470 mm, premer vrtljive mize: 800 mm, skupna masa: 22.000 kg, največja hitrost vretena: 5.000 obr/min, delovne ure vretena: 9.350 h, nos vretena: MAS 403 BT50, število vreten: 1, število mest v zalogovniku orodij: 90, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Niigata HN 80 C Fanuc 15M 5-osni horizontalni obdelovalni center z malo delovnimi urami in PODALJŠANIMI HODI X Y Z, krmiljenje Fanuc 15M hod osi X: 1530 mm hod osi Y: 1220 mm hod osi Z: 1140 mm Paletna miza: 800x800 mm / 3 palete Največja nosilnost: 2000 kg Največje število vrtljajev vretena: 5000 min⁻¹ Vreteno: MAS 403 BT50 Revija za orodja: 90 pozicij Hladilna tekočina skozi vreteno Mazanje ležajev vretena z oljno meglo Gedpet Rgz Tsfx Ab Tjkf Hladilnik olja za vreteno Obračalna miza okoli Y-osi, premer 800 mm Hidravlično razbremenjevanje škatle vretena Samodejni izklop stroja RS-422 komunikacijski vmesnik Električni ročni kolesni impulzni krmilnik Merilna sonda Renishaw MP-7 Postprocesor za CAM programsko opremo “Autodesk Fusion 360”

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Horizontal machining center Starrag Heckert Model HEC 1600 Athletic, in ready-for-operation condition (2 units available) Pallet size: 1250 x 1600 mm Max. pallet load: 8,000 kg Number of pallets: 25 pcs Fastems system Table indexing: B-axis, 0.001° Table cross travel (X): 2,800 mm Spindle vertical travel (Y): 2,200 mm Godsguk Nhjpfx Ab Tjkf Column longitudinal travel (Z):2,100 mm Boring spindle axial travel (W): 740 mm Feed X/Y/Z: 1 – 40,000 mm/min Rapid traverse X/Y/Z: 40 m/min Rotary table: 8 rpm Max. rotary diameter: 3,000 mm Spindle taper: ISO 50 Spindle bearing diameter: 200 mm Spindle motor output: 37 kW Spindle speed: 20 – 2,500 rpm Boring spindle diameter: 150 mm ATC (automatic tool changer): 80 positions CNC control: Siemens Sinumerik 840D Operating hours: Spindle: 22,200 hours Accessories: - Hexagon wireless measuring probe - Coolant unit with vacuum rotary filtration system - High-pressure coolant supply through spindle - Electrically operated Visiport clear-view window - Laser tool breakage control in work area - Cylinder path interpolation - ARTIS tool and process monitoring system Machines without Fastems = without pallet changers. - Pallet changer unit can be supplied by Starrag Heckert. Year of manufacture: 2007 (See also further offers from this advertiser)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, hitro pomikanje X-os: 24 m/min, hitri pomik os Y: 24 m/min, hitri pomik na osi Z: 24 m/min, proizvajalec krmilnikov: GSK, model krmilnika: 25I, širina mize: 1.000 mm, dolžina mize: 1.000 mm, največja hitrost vrtenja: 6.000 obr/min, skupna masa: 15.000 kg, največja hitrost vretena: 6.000 obr/min, razdalja od mize do središča vretena: 120 mm, razdalja od središča mize do nosu vretena: 200 mm, moč vretenovega motorja: 18.500 W, število vreten: 1, število mest v zalogovniku orodij: 30, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: transportni trak za ostružke, XYZ Linearne vodilne tirnice X hod: 1600 mm Y hod: 1000 mm Z hod: 1000 mm Avtomatski menjalec orodij za 30 orodij BT50, naključen tip z roko Delovna miza: 1000 x 1000 mm, CNC indeksiranje po 1º Vreteno: motor 6000 vrt/min Razdalja med čelom vretena in sredino mize: 200–1200 mm Gkedpfxev Idf Uo Ab Tjf Razdalja med središčem vretena in površino mize: 120–1120 mm Hitro pomikanje osi X, Y, Z: 24 m/min Tloris: 6000 x 4900 mm Višina stroja: 4000 mm Krmilnik GSK 25I Stroj v celoti v kabinetu Vir stisnjenega zraka: 6 kg/cm² Talni vijaki in distančniki Avtomatski sistem za mazanje Delovna luč Opozorilna luč s tremi barvami Pnevmatska pištola pri mizi stroja Transportni trak za odrezke in zalogovnik za ostružke Prenosna ročna enota MPG Črpalke za hlajenje Hidravlična postaja Nožno stikalo Na voljo imamo več dodatne opreme za ta stroj, kot so: CTS – hlajenje skozi vreteno (20 bar) Prednastavitvena naprava za orodja Renishaw in merilna tipala Dodatni paket

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Horizontal Machining Center Giddings & Lewis HMC 410 Pallet size: 1,250 x 1,600 mm Max. pallet load: 7,000 kg Pallet change time: 55 sec Number of pallets: 2 pcs Table indexing: B axis 0.001° Travel (X): 3,000 mm (table cross travel) Travel (Y): 2,100 mm (spindle vertical travel) Travel (Z): 1,800 mm (column longitudinal travel) Feed rates (X/Y/Z): 1 – 40,000 mm/min Rapid traverse (X/Y/Z): 40 m/min Rotary table speed: 6 rpm Max. rotary diameter: Ø2,500 mm Spindle taper: ISO 50 Spindle motor: 30 kW Spindle speed: 20 – 5,000 rpm ATC: 120 tool pockets CNC control: Siemens Sinumerik 840D Max. workpiece height: 2,000 mm Accessories: - Hexagon radio measuring probe Gsdpfx Aeguk Icob Tjkf - 2 loading stations Year of manufacture: 2001 (See also further offers from this seller.)

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), FASTEMS processing machine MLS-XHD, year of manufacture 2006, in operational condition Max. load per pallet: 6,000 kg Machine capacity: 5 units Pallet capacity: 25 units Available pallets: 19 units Loading stations: 2 units X-axis: max. 2650 mm Y-axis: max. 2300 mm Gjdpsguk E Tjfx Ab Tokf Robot with grinding function: 1 unit System layout dimensions: 15 x 54 meters Year of manufacture: 2006 See also other offers from this seller.