Obdelovalni center

Mori Seiki NH 8000 DCG

Stanje: rabljeno, Leto izdelave: 2008, Technical details: x-travel: 1,400 mm y-travel: 1,200 mm z-travel: 1,350 mm Control system: MSX-701 Mapps III Table clamping surface: 800 x 800 mm Rapid traverse: 50 m/min Table rotation: 360,000 x 0.001° B-axis Table load capacity: 2.0 t Number of pallets: 2 Spindle speed range: 8,000 rpm Spindle drive power: 37 kW Lrsdpfowi Ibusx Aaceh Number of tools in magazine: 60 pcs Tool holder: HSK-A 100 Weight: 31 t Dimensions (L x W x H): 5.9 x 4.1 x 3.68 m 4-axis horizontal machining center in excellent condition Equipment/features: - Through-spindle coolant, 70 bar - Tool spindle with face contact - Cylindrical interpolation - Cone/spiral interpolation - Synchronous tapping and milling - Chip conveyor + Concept 2000 - Knoll filter system - Mechanical oil mist extractor LTA - Electronic handwheel - Renishaw workpiece probe - Linear glass scales in X/Y/Z axes - 5 free M functions - Extended part program memory 1 MB - 48 additional zero points - Dynamic fixture correction - Double ball screws in X/Y/Z axes - Program restart after interruption - 2 x coolant guns

Stanje: rabljeno, Leto izdelave: 2012, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, Travel range: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems incl. table cooling Dynamic package: Linear drive in X / Y axis Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooling for main spindle, linear drive, and table Control: Siemens 840D SL Operate Lrsdsyc Tthspfx Aacsh Spindle: 20 - 24,000 rpm, HSK-A63 according to DIN 69893 • Tool magazine: chain-type magazine with 60 positions • Tool length measurement and breakage control: Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) paper filter 40 bar, 231 l/min, 600 l tank, incl. rotating viewing window, sealing air for linear systems, bed flushing • Air blast through spindle center selectable via M function, maintained air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing • Laminated safety glass windows for work area door and side window • Operating mode 4 • High speed settings • Probe: Blum HSK-A63 • Preparation for 3D QuickSet • Possible oil mist extraction system • New spindle installed at 25,800 spindle hours

Stanje: rabljeno, Leto izdelave: 2011, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.350 mm, teža obdelovanca (maks.): 2.200 kg, proizvajalec krmilnikov: Fanuc, dolžina mize: 800 mm, širina mize: 800 mm, model krmilnika: i 31A, nos vretena: MAS BBT 50, obremenitev mize: 2.200 kg, Mori Seiki NH 8000DCG-II Horizontal machining center CNC control MSX-701 IV (Fanuc i 31A) Pallet table size: 800 x 800 mm Number of pallets: 2 Table load capacity: 2,200 kg X-axis travel: 1,400 mm Y-axis travel: 1,200 mm Z-axis travel: 1,350 mm Table indexing: 0.001° Spindle taper: MAS BBT 50 Spindle speed: 10 – 8,000 rpm Spindle motor: 37/30 kW Tool magazine capacity: 100 Ljdpfxeydmifo Aacjrh If you have any questions regarding the machine or would like to arrange a viewing, please feel free to contact us by phone or email. We also invite you to browse our other listings to get a complete overview of our current inventory.

Stanje: dober (rabljeno), Leto izdelave: 2005, Horizontal Machining Center Machine Type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of Manufacture: 2005 Lrodjv Nhylspfx Aacjh TECHNICAL DATA: Travel distances: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse (X/Y/Z): 50 m/min Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool stations: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirements (LxWxH): 9,200 x 4,900 x 3,920 mm Equipment features: Through-spindle coolant (IKZ): bar Chip conveyor High-pressure pumps

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: Ljdpfx Aod Nb A Neacsrh The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Leto izdelave: 2008, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 680 mm, največja hitrost vretena: 24.000 obr/min, Lot no. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year of manufacture 2008 CNC control Sinumerik 840D NC rotary table, B-axis Tool magazine for 80 tools Pallet changer device, 2 pallets 400 mm x 400 mm Through-spindle coolant supply (IKZ) Chip conveyor Lrjdpfx Aajrairwscjh Coolant system Technical data: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool stations in changer: 80 Machine weight approx.: 13,000 kg Technical data, accessories and machine description are non-binding.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 106 h, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, moč: 185 kW (251,53 KM), vrsta prenosa: samodejen, dolžina vilic: 3.000 mm, barva: rdeča, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Height: 370 cm CE marking: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRUCK TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000KG AT 120CM LOAD CENTER SHORT WHEELBASE = 475CM FORK LENGTH = 300CM, WIDTH = 30CM, THICKNESS = 11CM Ledpfx Aaev Hn D Ejcerh FRONT AND REAR VIEW CAMERAS TIRE PRESSURE CONTROL SYSTEM CENTRAL LUBRICATION LED PACKAGE CHASSIS / BODY: - Towing pin - Steps with anti-slip protection - Rearview mirrors mounted left and right on the front fenders - Robust and protective fenders CABIN: - EGO cabin - Clear, toughened safety glass windows, thickness 6 mm - Clear windows including sliding windows in left and right doors - Full-size doors with locks on both sides - Complete operation system on right console including light controls, rotary control for display, levers for load handling system (electric adjustable, 2-way) - Multifunction lever left, including horn and indicators - Brake pedal system left and right - Interior comfort: mirrors, handles, interior lighting, etc. - Front/rear and roof window wipers and washers - Hydraulic steering, steering wheel adjustable electrically in height, manually in reach and rake, with steering knob - External reversing lights - Tilting cab - Foot grip, left - Automatic heating and ventilation (ECH) with fresh air filter - Cruise control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indicator, engine and transmission temperature, engine oil pressure, battery voltage, clock and date, operating hours counter, service time indicator, speed, engine RPM, pop-up information, AdBlue display STEERING SYSTEM: - Kalmar steering axle including double-acting steering cylinder DRIVELINE: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic engine speed increase when using load handling function - Standard tilt angles 5F/10B ELECTRICAL SYSTEM: - 24V electrical system - Rear lights and brake lights, LED - Work lights on the front fenders, LED - 2 x mast work lights - Indicators including hazard flashers, LED - Master switch TIRES: - Michelin 16.00x25

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm Lodpfx Asv Ehbboacerh (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg with robot cell

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.250 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 390 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 1.300 mm, prehod palice: 65 mm, skupna višina: 2.700 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, skupna masa: 12.000 kg, Oprema: dokumentacija / priročnik, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofitted in 2022) Control: Siemens 840D Solutionline Number of axes: 5-axis Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant system and chip conveyor - Differential pressure clamping for main / counter spindle - Workpiece pick-up device - Preparation for bar feeder (available as an option) Technical specifications: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B-axis: 220° Spindle bore: 65 mm Spindle speed: 5,000 rpm Spindle power: 34 kW Lodpfx Aajubyv Rscsrh Counter spindle speed: 6,000 rpm Counter spindle bar capacity: 52 mm Counter spindle power: 20 kW Tool changer: 24 stations B-axis interface: HSK 63 B-axis spindle speed: 12,000 rpm B-axis spindle power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: • Full enclosure • NC swivel head as B-axis • Coolant unit and chip conveyor • Documentation • Geometric accuracy within new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer’s tolerances for new machines - All wear parts replaced Retrofit 2022: - Z1 and Z2/3 linear guides replaced - Y-axis linear guide replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Slide covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, viewing windows replaced - Maintenance carried out according to manufacturer’s specifications

Stanje: novo, Leto izdelave: 2025, Performance: 25 and 40 kg/h Lrsdopfatpopfx Aaceh Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper capacity: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg