Stružnica z vodilno/pogonsko vreteno, premer struženja nad posteljo 300–399 mm nakup rabljenega (193)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 190 mm, premer struženja: 330 mm, širina na sredini: 650 mm, 3-jaw chuck steel tool holder tailstock Technical data: Itsdpfx Aewtx A Dedkjd Center distance 650 mm Turning diameter over bed 330 mm Turning diameter over carriage 190 mm Spindle bore 36 mm Spindle speed range 30–2500 rpm Drive power 2.2 kW Machine weight approx. 600 kg Technical data, accessories, and machine description are not binding.

Stanje: rabljeno, L + Z stružnica WEILER tip Condor 81 A Stroj. št.: 36553 Leto izdelave cca 1985 Razdalja med konicama: 750 mm Premer struženja nad posteljo: 330 mm Višina konice nad posteljo: 165 mm Premer struženja nad suportom: 180 mm Višina konice nad suportom: 90 mm Premer vretena: 40 mm Priklop čeljusti: kratki stožec DIN 55027 št. 5 Konica v konjičku: MK 3 Pomik puše konjička: 110 mm Hitrost vretena: 45 - 2800 vrt/min, 16 stopenj Pogonska moč: 3 kW Omrežni priklop: 400 Volt, 50 Hz - Hitrost vretena v 16 prestavah - 3-čeljustna stružna glava Ø 160 mm RÖHM z vrtalnimi in stružnimi čeljustmi - Hitromenjalni nosilec rezila Multifix velikosti B s 3 vložki Itsdpfsk S Ht Aex Adkjd - Avtomatski vzdolžni in frontalni pomik - Elektromehanska zavora vretena - Nujna zaustavitev - Rezervoar za hladilno tekočino s črpalko v podstavku stroja, brez napeljave do delovnega območja - Zložljiv varnostni pokrov čeljusti - Zaščita pred brizganjem - 1 kos vrtljiv centrirni koničnik - Električna shema in navodila za uporabo Mere D x Š x V: 1850 x 950 x 1400 mm Teža: 1100 kg Dobro stanje

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 160 mm, izvrtina vretena: 36 mm, premer struženja: 300 mm, višina središča: 150 mm, širina na sredini: 500 mm, skupna dolžina: 1.500 mm, skupna širina: 800 mm, skupna višina: 1.300 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 15 obr/min, skupna masa: 1.000 kg, Konvencionalni precizni stružni stroj z vpenjalno napravo za klešče, višina konic 150 mm, razdalja med konicama 500 mm, premer izvrtine Ø 36 mm, 18 hitrosti vrtenja 15 - 3550 min⁻¹, motor 3 kW, oprema: naprava za hlajenje, vpenjalna naprava za klešče, 3-čeljustna glava, vrtalna glava, stružni konjiček, hitromenjalni držalo RAPID s 5 vložki, strojna svetilka, vzdolžni prislon, mere 150x80x130 cm, teža ca. 1000 kg. Iodpjx Urmljfx Adkstd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with new 3-axis digital readout and accessories. Original paintwork. Machine no. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centres: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose DIN 55027-5 with bayonet locking - Tailstock taper: MT 3 - Feeds from 0.016 to 0.5 mm/rev - Capable of cutting metric, inch, module and diametral pitch threads - Metric thread pitch from 0.18 to 28 mm - Weight approx. 1100 kg - Switchable spindle brake - Required space (LxWxH): 183 x 88 x 129 cm Accessories and equipment: - 3-jaw steel chuck (Rhom) - New collet set 5C 1/28mm, increments of 0.5mm, with new drawbar Isdpfeyuyrusx Adkjtd - New drill chuck 1/13mm - Multifix toolpost with 4 steel holders - Bed stop - New live center - Change gears - Face plate - Coolant system - Chip guard - Spindle cover with emergency stop - German machine manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Specifications: >> Year of manufacture: 1991 Machine no.: 91-1624 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm Itedpfx Adsym Srqokod >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Spindle brake >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and equipment: >> 3-axis digital readout by Heidenhain >> 1 piece 3-jaw scroll chuck with one set of jaws >> Toolpost with 7 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre >> Coolant system About the machine: For sale is a used Weiler Condor B lathe, year 1991, in very good condition. The machine is, of course, fully functional—a robust and high-performance lathe. This Weiler comes from a training workshop and has been very well maintained. The 3-axis digital readout from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically checked by us, and a complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81, lead and feed screw lathe with Heidenhain 3-axis digital readout, from a training workshop Technical Data: • Year of manufacture: 1987, Machine no. 87-674 • Centre height: 165 mm • Centre distance: 750 mm • Spindle speeds: 22 to 2800 rpm • Spindle bore: 40 mm • Short taper spindle nose DIN 55027, size 5 with bayonet lock • Tailstock: Morse taper 3 • Feeds: 0.015 to 0.46 mm/rev • Thread types possible: metric, imperial, module, and diametral pitch • Metric thread pitches: 0.18 to 28 mm • Spindle brake • Weight: approx. 1100 kg • Spindle brake switchable • Dimensions (LxHxW): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: • Heidenhain 3-axis digital readout • 3-jaw chuck with wedge bar and 1 set of jaws • Quick-action collet system with collets from 1-29 mm in 0.5 mm increments • Toolholder with 7 pockets • Bed stop • Machine feet • Drill chuck • Revolving centre • Coolant system Iodpfxoym Slwe Adketd About the machine: For sale is a used Weiler Condor 81 lathe, year of manufacture 1987, in very good condition. The machine is, of course, fully functional—robust and powerful. Coming from a training workshop, this Weiler has been very well maintained. The Heidenhain 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on-site.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Največji premer obdelovanca nad ležiščem: 330 mm Največji premer obdelovanca brez mostu ležišča: 476 mm Največji premer obdelovanca nad suportom: 198 mm Višina konic: 165 mm Dolžina struženja: 500 mm Pritrditev vretena: D1-4/DIN55029 Premer izvrtine vretena: 38 mm Možno rezanje navojev: metrični, Whitworth, modul Hitrost vretena: 70 – 2000 obr/min Konus konjička: Morse 3 Moč motorja: 1,1/1,5 kW Teža stroja: 500 kg Dimenzije stroja: 1320 x 610 x 1400 mm Oprema, dodatki - 3-čeljustna vpenjalna glava D160 mm - 4-čeljustna vpenjalna glava D200 mm - 4-kratni nosilec orodja - Elektromehanska zavora vretena - So- in prosto stoječa luneta - Hladilni sistem Itjdpfsxb Axcox Adked - Halogenska delovna svetilka - Zaščita za vpenjalno glavo - Zaščita proti brizganju - Priročniki Stroj je v tovarniško novem stanju. Delovnih ur: 0. Razstavni stroj.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout from Training Workshop Technical Data: >> Year of manufacture: 1990 Machine no. 90-1419 >> Centre height: 165 mm >> Distance between centres: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Spindle brake >> Weight approx. 1100 kg Ijdpfx Adjym Dczjkjtd >> Spindle brake engageable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> 3-axis Heidenhain digital readout >> 1 pc. 3-jaw chuck with wedge bars and 1 set of jaws >> Tool post with 7 tool holders >> Bed stop >> Machine feet >> Keyless drill chuck >> Live centre >> Coolant system About the machine: Offered is a used Weiler Condor B lathe, year of manufacture 1990, in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The Weiler comes from a training workshop and is very well maintained. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, including acceptance protocol for new machine tolerances Technical Data: Iodpfsymznhjx Adkstd >> Machine No.: 2268-87 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Switchable spindle brake >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty, with operating manual >> New 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons On request: Covers for lead and feed screws About the machine: Offered here is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been reground or newly scraped. Acceptance according to inspection protocol. Painted in 2K glossy white. Accessories such as Multifix and chuck are new. For safety: The machine features a brake motor, electronic spindle guard, and two emergency stops. This is an as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely operator-friendly and allows for ground-like surface finishes. Take the opportunity to view and test this machine on site under power and see the condition for yourself.

Stanje: dober (rabljeno), Prodajam stružnico Colchester Triumph 2500, ki je popolnoma delujoča in pripravljena za uporabo. Stružnica je opremljena z digitalnim prikazovalnikom Fagor ter ima črpalko za hladilno-mazalno sredstvo, nameščeno pod koritom za ostružke. Tehnični podatki: Višina konic: 167 mm, Razdalja med konicama: 635 mm, Premer struženja nad posteljo: 330 mm, Premer struženja nad prečnim suportom: 210 mm, Vrtina vretena: 40 mm, Pogonska moč: 2,2 kW. Vključeni so 15 držal orodij, valjčna konica in noge stroja. Nakladanje predstavlja težavo. Isdpfx Ajxw N I Nodketd

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 8001172087, premer struženja nad prečnim suportom: 300 mm, premer struženja nad ležiščem sani: 460 mm, višina središča: 230 mm, največja hitrost vretena: 1.250 obr/min, hitrost vretena (min.): 28 obr/min, višina osi nad prečnim suportom: 150 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 08.04.26 in 16.04.26! TEHNIČNI PODATKI Območje vrtljajev vretena: 28 do 1250 vrt/min Ijdpsyk Hzzefx Adkstd Premer vretena: 58 mm Dolžina med konicama: ca. 1000 mm Višina konice nad posteljo: 230 mm Višina konice nad suportom: 150 mm Premer struženja nad posteljo: 460 mm Premer struženja nad suportom: 300 mm Premer trivoščelne glave: 250 mm Proizvajalec trivoščelne glave: FORKARDT PODROBNOSTI O STROJU Obratovalna napetost: 380 V Krmilna napetost: 220 V Frekvenca: 50 Hz Dimenzije in teža D x Š x V: 3000 x 1000 x 1800 mm Teža stroja: 2 t OPREMA Konjiček Multifix nosilec rezila Ustrezen delavniški omar z dodatki

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 32 mm, premer struženja: 320 mm, višina središča: 160 mm, stružna dolžina: 650 mm, premer trikrake glave: 160 mm, For sale here is a lathe from Voest Alpine in good condition! See photos for details. Manufacturer: Voest Alpine Model: DA-160 Center height: approx. 160 mm Center distance: approx. 650 mm Swing over bed: approx. 320 mm Swing over cross slide: approx. 190 mm Spindle bore: approx. 32 mm Three-jaw chuck diameter: approx. 160 mm Tailstock taper: MK3 Included accessories: 4-jaw chuck Ø 160 mm, 6 tool holders, 4 pairs of turning jaws Machine dimensions: approx. 150x90x180 cm (LxWxH) The machine can be inspected and tested at our premises by arrangement. Loading options: by forklift or crane. Shipping costs on request (depending on zip code). You will receive an invoice with indicated VAT. Inspection/collection is possible by prior arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, loaded free of charge. Subject to prior sale and errors in technical specifications. Itsdpfx Aswq Ehbodkod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with Toolmaker Precision, Year 2003, with 3-axis Digital Readout ACU RITE, in Very Good Condition, CE Compliant Itsdpfxoyly Nno Adkjd Technical Data: >> Year of Manufacture: 2003, Machine No. 4391 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: from 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible Threads: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle Brake Switchable >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Features and Accessories: >> 3-axis Digital Readout ACU RITE >> Quick-clamping System with Collets from 3 to 30 mm, 1.0 mm increments >> 3-jaw Chuck Röhm 160 mm with one set of jaws >> Multifix Size A with 3 tool holders >> Coolant System >> Machine Lamp >> Electronic Spindle Guard >> Machine Feet >> Bed Stop >> Splash Guard >> Operating Manual, Spare Parts List About the Machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, year 2003, in very good condition. The machine comes from a large company and was only used very infrequently. A very fine lathe with work spindle safety device. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surfaces. The Heidenhain digital readout makes operation even easier and more precise. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout Heidenhain – In Excellent Condition!!! Technical Data: >> Year of manufacture: 1991, Machine No. 3140 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 Size 6 with bayonet lock >> Tailstock MT 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.35 to 12 mm >> Weight: approx. 1,500 kg >> Spindle brake can be engaged >> Motor power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis digital readout by Heidenhain >> 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet Itsdpsylh Ncefx Adkjd About the Machine: For sale is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned facility where it saw very little use. The Commodor is one of the largest manual lathes produced by Weiler – robust and high-performance. The 3-axis Heidenhain digital readout makes operation even easier and more precise. The machine has been electrically and mechanically tested by us; a complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our facility.

Stanje: novo, Leto izdelave: 2026, izvrtina vretena: 38 mm, premer struženja: 330 mm, stružna dolžina: 750 mm, skupna dolžina: 1.330 mm, skupna širina: 750 mm, skupna višina: 700 mm, največja hitrost vretena: 1.650 obr/min, hitrost vretena (min.): 60 obr/min, skupna masa: 320 kg, Universal Lathe 330 × 750 mm The machine is designed for machining workpieces, primarily for creating surfaces on rotational bodies (shafts, cones, spheres, as well as internal and external threads). Typical machining tools used include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, this lathe is ideal for professional and industrial applications. Equipment - 160 mm 3-jaw chuck - Coolant system - Live center MT3 - Lathe stand - Change gears for thread cutting - Work light Optional Equipment - 2-axis digital readout (DRO) Technical Data - Swing over bed: 330 mm - Maximum workpiece length: 750 mm - Swing over cross slide: 220 mm - Chuck diameter: 160 mm - Spindle bore: 38 mm - Spindle taper: MT5 - Number of metric thread types: 20 Itedpeyvfzqofx Adked - Metric thread range: 0.5 – 4 mm - Imperial thread range: 9 – 40 TPI - Longitudinal feed: 0.135 – 1.80 mm/rev - Tailstock quill travel: 70 mm - Tailstock taper: Morse 3 - Number of spindle speeds: 12 - Spindle speed range: 60 – 1650 rpm - Motor power: 1.1 kW - Dimensions (L × W × H): 1330 × 750 × 700 mm - Weight: 320 kg Delivery to customer is possible. Delivery costs are calculated individually according to the transport company's quote. If you are interested in other machines, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1324, izvrtina vretena: 42 mm, skupna dolžina: 2.000 mm, skupna širina: 1.000 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 22 obr/min, skupna masa: 1.500 kg, WEILER CONDOR B vodilni in pogonski vretenasti stružni stroj - Obratovalna napetost: 380 V - Krmilna napetost: 220 V - Priključna moč: 3 kW - Nazivni tok: 25 A - Frekvenca: 50 Hz Itjdpfx Ajyiztiedked - Dolžina med konicami: ca. 700 mm - Višina konice nad ležiščem: 170 mm - Premer struženja nad ležiščem: 340 mm - Višina konice nad suportom: 100 mm - Premer struženja nad suportom: 200 mm Stroj je opremljen z konjičkom, multifix držalom za stružni nož, tip B, ter trikrako glavo proizvajalca RÖHM, premer: 150 mm, dodatno z digitalnim prikazovalnikom proizvajalca ELESTA, tip: VISULESTA 4, vključno z ustrezno delavniško predalno omaro in ustreznimi dodatki k stroju. FCA D-73235 Weilheim Teck - naloženo na tovornjak

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Takoj na voljo z univerze: Skoraj nov stružnica L & Z Knuth Itedpfx Adeyvg S Ejkjd Tip Basic 180 Super Leto izdelave 2018 Višina konic: 180 mm Obhod nad posteljo: 360 mm Obhod nad suportom: 220 mm Dolžina struženja: 1000 mm Premer vretena: 38 mm Hitrosti vretena: 45 – 1800 obr/min Nasadnik MK 4 2-osni digitalni prikazovalnik Vpenjalna glava Nosilec orodja Luneta Nasadnik Pogon 3,5 kW Teža 1 t Cena: 3.000 EUR + DDV iz lokacije

Stanje: rabljeno, Leto izdelave: 2014, premer struženja: 340 mm, stružna dolžina: 2.000 mm, skupna dolžina: 4.270 mm, skupna širina: 2.130 mm, skupna višina: 1.840 mm, skupna masa: 3.900 kg, 2-osni Teach-In / ciklično vodeni CNC stružnica CNC krmilje Fagor 8055 i Power TC Itsdpfxjyr I Rto Adked Stružni premer 340/570 mm Stružna dolžina 2000 mm Višina sredine 275 mm Premer vretena 108 mm Vretenasti nos D 1-8 Hitrost vretena 0-2.500 obr/min Pomik v osi X 310 mm Pomik v osi Z 2000 mm Za vsa vprašanja v zvezi s strojem ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Oglejte si tudi naše ostale oglase za celovit pregled naše zaloge.

Stanje: dober (rabljeno), Obdavčeno po diferencirani stopnji v skladu s §25a Zakona o DDV. Prejmete ustrezen račun, vendar DDV ni izkazan. Interna številka artikla: 26010 Stroj si lahko pod napetostjo ogledate na več kot 500 m² ogrevanih skladiščnih površin. Univerzalni stružnica z vodilnim in vlečnim vretenom Voest Alpine DA180 + Hladilni sistem + Röhm 200 četveročeljustno vpenjalo + Zaščita vpenjala (s stikalom) + Multifix "B" Motor: 380 V / 5,5 kW Hitrost vrtenja: 44 – 2.000 min⁻¹ Stružni premer nad posteljo: 380 mm Stružni premer nad suportom: 185 mm Dolžina struženja: 1.000 mm Višina konice: 180 mm Širina postelje: 330 mm Premer vretena: 52 mm Konus vpetja konjička: MK 4 Dimenzije (DxŠxV): 220 x 120 x 160 cm Teža cca 1.200 kg Stroj prihaja iz izobraževalnega centra in je v dobro ohranjenem stanju. Itjdpfx Adeyg Dtgsked

Stanje: dober (rabljeno), Leto izdelave: 1983, Obdavčeno po §25a zakona o DDV (UStG). Prejmete ustrezen račun, vendar DDV ni prikazan. Iedpfx Aeyg Dl Asdkotd Interna številka artikla: 26012 Stroj si lahko ogledate pod napetostjo na več kot 500 m² ogrevane skladiščne površine. Vodilni in vlečni vretenasti stružni stroj Voest Alpine DA180 Največji premer vrtenja nad posteljo: 380 mm Razdalja med konicama: 800 mm Izvrtina vretena: 52 mm Konjiček: MK4 Multifix 'B' osnovni nosilec Zaščita vpenjalne glave (s stikalom) Tročeljustna vpenjalna glava Röhm 200 mm Mere (D x Š x V): 250 x 140 x 140 cm Teža: pribl. 1200 kg Stroj izvira iz izobraževalne ustanove in je v dobro ohranjenem stanju.

Stanje: rabljeno, Leto izdelave: 1976, Premer struženja nad posteljo: 300 mm Premer struženja nad podporo: 180 mm Dolžina struženja: 750 mm Območje vrtljajev: 44 - 1300 min⁻¹ Vrtalna odprtina vretena: 41,0 mm Hod pinole: 105 mm Morsejev stožec: 3 MK Širina postelje: 245 mm Skupna potrebna moč: 2,2 kW Teža stroja pribl.: 1250 kg Potreben prostor pribl.: 2000 x 1200 x 1500 mm Itedpjxu Nrcefx Adkod Stroj vključuje veliko dodatne opreme, kot so 3-čeljustna vpenjalna glava, 4-čeljustna vpenjalna glava, čelna plošča, hitromenjalni nosilec orodja, vpenjalna glava z vpenjalci in menjalna kolesa za rezanje navojev.

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, OPTIturn TH 4010D Lathe A precise, gear-driven lathe with digital position display, center height/center distance 205 mm / 1000 mm, motor power 2.4 kW, 400 V, spindle speed 45–1800 rpm, spindle bore diameter 52 mm, spindle foot brake, with automatic longitudinal and cross feed, CAMLOCK chuck interface, universally applicable workshop machine. Including machine base with chip drawer, LED lamp, coolant system, etc. Fully equipped engine lathe. Hardened and ground bed guideways Spindle mount Camlock DIN ISO 702-2 No. 5 Guaranteed spindle nose concentricity better than 0.015 mm Gears and shafts are hardened and ground, running in an oil bath on precision bearings Motor circuit breaker DC 24 Volt electrical system Lockable main switch Forward/reverse operation on carriage selectable Removable chip tray with guide rails Safety handwheels with disengagement function on X- and Z-axes Emergency stop device with foot pedal Machine base with tool compartment on the right-hand side. Digital Position Indicator DPA 21 User-friendly membrane keypad, splash-proof, sealed, and anti-glare Increased working accuracy Reduced error rate thanks to clear design X, Y/Z0, Z-axis with 8-digit display each Supplied sensor for spindle speed detection Glass scales on all three axes Connection voltage: 400 V Drive motor power: 2.4 kW Protection: 16 A Spindle taper: MK 6 Spindle mount: Camlock No. 5 Spindle bore: 52 mm Center height: 205 mm Center distance: 1000 mm Swing over bed Ø: 410 mm Swing over cross slide Ø: 270 mm Swing without gap bridge Ø: 540 mm Turning length in gap bridge: 165 mm Bed width: 206 mm Spindle speed: 45–1800 min⁻¹ Number of gear steps: 16 Travel of top slide: 100 mm Travel of cross slide: 195 mm Longitudinal feed: 0.043–0.653 mm/rev Number of longitudinal feeds: 48 Cross feed 0.015–0.206 mm/rev Number of cross feeds: 48 Metric thread pitches: 0.4–7 mm/rev Number of metric thread pitches: 42 Imperial thread pitch: 70–4 TPI Number of imperial thread pitches: 42 Maximum tool shank height: 16 x 16 mm Tailstock taper: MK 3 Tailstock quill stroke: 130 mm Quill diameter: Ø 45 mm Itedpfx Adoykngroksd Dimensions L x W x H: 1920 x 740 x 1555 mm Weight: 750 kg

Stanje: novo, Bernardo Universal Lathe Master 360 Pro Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 502 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Speed Range (8 steps): 70 – 2000 rpm Longitudinal Feed Range (32): 0.052 – 1.392 mm/rev Cross Feed Range (32): 0.014 – 0.380 mm/rev Metric Threads (26): 0.4 – 7.0 mm Inch Threads (34): 4 – 56 TPI Quill Diameter: 42 mm Quill Travel: 100 mm Quill Taper: MT 3 Motor Output S1 100%: 1.5 kW (400 V) Motor Output S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1825 x 750 x 1600 mm Weight: approx. 576 kg *Removable bed gap length: 205 mm Scope of Delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed steady rest – max. workpiece diameter 70 mm - Travelling steady rest – max. workpiece diameter 60 mm - Coolant system - Initial fill with Shell Tellus 46 oil - Removable chip tray - Clamping plate 280 mm - Four-way tool post - Safety cover for four-way tool post - Slip clutch - Micrometer stop - Thread dial indicator - LED machine lamp - Reducing sleeve - Change gears Iodpfx Aded I H Izekstd - 2 centres - Foot pedal with brake function according to CE - Motor with electromagnetic brake according to CE standard - Base frame with drawers - Operating tools

Stanje: novo, Lead and Feed Screw Lathe Bernardo Standard 165 D Technical Specifications Centre Distance: 1000 mm Centre Height: 175 mm Swing over Bed: 350 mm Swing over Gap*: 450 mm Swing over Cross Slide: 190 mm Bed Width: 180 mm Spindle Bore: 40 mm Spindle Mount: DIN 55029, D1-4 Spindle Speed Range: (8 steps) 70 - 2000 rpm Longitudinal Feed Range: (40) 0.053 - 1.29 mm/rev Cross Feed Range: (40) 0.013 - 0.31 mm/rev Metric Threads: (32) 0.4 - 7 mm Inch Threads: (36) 4 - 60 TPI Quill Travel: 110 mm Quill Taper: MT 3 Motor Output (S1 100%): 1.5 kW (400 V) Motor Input (S6 40%): 2.2 kW (400 V) Machine Dimensions (W x D x H): 1730 x 700 x 1340 mm Approx. Weight: 514 kg * Removable bed section Scope of Delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-160 mm / D4 • Faceplate 200 mm / D4, according to DIN 55029 • Fixed steady rest – max. passage diameter 60 mm • Travelling steady rest – max. passage diameter 60 mm • Clamping plate 250 mm • Four-way tool post • Shaft locking device • Safety guard for tool post • Slip clutch • Micrometer longitudinal stop • Coolant system • Extendable chip tray • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Splash guard • Thread dial indicator • LED machine light • Reducing sleeve • Change gears • 2 centre points • Base frame • Operating tools Itedpfx Adjd Ri Ezjkod

Stanje: novo, Bernardo Lead and Feed Screw Lathe Master 180 incl. 3-axis digital display Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over gap*: 480 mm Swing diameter over cross slide: 220 mm Bed width: 185 mm Spindle bore: 51 mm Spindle mount: DIN 55029, D1-5 Speed range: (8 steps) 70 - 2000 rpm Longitudinal feed range: (32) 0.052 - 1.392 mm/rev Cross feed range: (32) 0.014 - 0.380 mm/rev Metric threads: (26) 0.4 - 7.0 mm Imperial threads: (34) 4 - 56 TPI Tailstock quill diameter: 42 mm Tailstock quill travel: 110 mm Tailstock taper: MT 4 Motor output S1 100%: 1.5 kW (400 V) Motor rating S6 40%: 2.2 kW (400 V) Machine dimensions (L x W x H): 1920 x 750 x 1600 mm Weight approx.: 540 kg * Removable bed section: 225 mm Scope of delivery • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, acc. to DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Follow rest – max. passage diameter 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • 4-way tool post • Protective device for 4-way tool post • Safety clutch • Micrometer longitudinal stop • Thread dial indicator • LED machine lamp • Reducing sleeve • Change gears • 2 centres • Foot pedal with brake function in accordance with CE Ijdpfxsd Du Tie Adkjtd • Motor with magnetic brake according to CE standard • Machine base