Stanje: novo, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €76,220 Leasing rate: €1,440.56 Grinding length: 1,015 mm Distance spindle - table: 610 mm Table: 1,000 x 400 mm Magnetic chuck: 400 x 1,000 mm Table movement (hydraulic): 1,050 mm Table speed: 5 - 25 m/min Cross feed: 0 - 2,250 mm/min Incremental cross feed: mm (info not specified) Max. cross travel: 450 mm Automatic vertical feed: 480 mm Vertical feed: 0 - 675 mm/min Incremental vertical feed: 0.001 - 0.04 mm Spindle speed: 500 - 1,800 rpm Spindle motor: 3.75 kW Hydraulic motor: 1.5 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 4,280 mm Width: 2,080 mm Height: 2,100 mm Weight: 3,500 kg Max. workpiece weight on magnetic chuck: 220 kg Max. workpiece weight on clamping table: 440 kg Grinding wheel dimensions: 355 x 50 x 127 mm Fine feed per graduation: mm (info not specified) 10.4'' iSurface graphic NC control on swing arm with touchscreen for: - Operation mode selection - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Imbalance control - Graphical status monitoring - Alarm list - Automatic vertical feed - Servo drive for grinding wheel infeed and table cross adjustment - Hardened guideways in all 3 axes with needle bearings - Electro-magnetic chuck - Coolant system with automatic paper filter and magnetic separator - Automatic table-mounted dressing device (without diamond, with automatic compensation)* Ksdpfjwiqyajx Adkeww - Grinding wheel - Grinding wheel flange - Grinding wheel balancing scale - Balancing arbor - LED machine lamp - Machine and equipment in accordance with CE regulations - Operating instructions in GERMAN and ENGLISH *Exact configuration of the dressing device must be clarified before ordering

Stanje: novo, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €76,550 Kwedpfowiqvbex Adkew Leasing rate: €1,446.80 Grinding length: 460 mm Distance spindle to table: 445 mm Table: 460 x 200 mm Magnetic chuck: 450 x 200 mm Table speed: 0.1 – 25 m/min Cross feed: 0 – 3,000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 220 mm Automatic vertical feed: 340 mm Vertical feed: 0 – 3,000 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 1,000 – 7,000 rpm Spindle motor: 3 kW Hydraulic motor: 0.7 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 2,510 mm Width: 2,515 mm Height: 2,010 mm Weight: 1,550 kg Table height: 1,015 mm Max. workpiece weight on magnetic chuck: 175 kg Max. workpiece weight on clamping table: 210 kg Grinding wheel dimensions: Ø205 x 12.7 x 31.75 mm Positioning accuracy: 0.004 mm Repeatability: 0.003 mm Smart i control system with 10.4" touchscreen on swiveling panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (DXF transfer into C-code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal guides with double V form, with Turcite-B coating Cross and vertical feed with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulic Fully enclosed with lighting Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device mounted on table, without diamond, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing device Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dressing device must be clarified before ordering.

Stanje: novo, Condition: New Delivery time: approx. 6 months from order Price: €162,050 Leasing rate: €3,062.75 Grinding length: 1200 mm Distance spindle - table: 730 mm Table size: 1200 x 600 mm Electromagnetic chuck: 1200 x 600 mm Table movement (hydraulic): 1300 mm Table speed: 5 - 30 m/min Cross feed: 0-2250 mm/min Incremental cross feed: 0.001-32 mm Max. cross feed: 685 mm Automatic vertical feed: 560 mm Vertical feed rate: 0-675 mm/min Spindle speed: 500-2200 rpm Spindle motor: 11 kW Hydraulic motor: 5.5 kW Cross feed motor: 3.1 kW Grinding wheel feed drive: 3.1 kW Length: 4790 mm Width: 3207 mm Height: 2305 mm Weight: 8100 kg Max. workpiece weight on magnetic chuck: 1150 kg Max. workpiece weight on clamping table: 1600 kg Grinding wheel dimensions: 405 x 75 x 127 mm Min. Input: 0.0001 mm 10.4" iSurface Graphic NC control on swivel arm with touchscreen for: - Selection of operating mode - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in the machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Imbalance control - Graphical status monitoring - Alarm list Max. table speed: 30 m/min Integrated machine body temperature control Turcite-coated double V-guides Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise positioning in X and Z axes Automatic lubrication with pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 1200 x 600 mm Coolant device with automatic paper filter and magnetic separator Automatic dressing unit mounted on the table, without diamond, with automatic compensation * Grinding wheel flange with 1 grinding wheel Grinding wheel balancing scale LED machine lamp Kodpswiqq Eofx Adkoww Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dressing unit must be clarified prior to ordering OPTION (PRICE ON REQUEST): - Complete enclosure of the working area

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, največja hitrost vretena: 8.000 obr/min, skupna masa: 3.800 kg, premer obdelovanca (maks.): 250 mm, potovalna razdalja osi X: 400 mm, pomik osi Y: 310 mm, teža orodja: 50.000 g, število osi: 5, This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8,000 rpm. The machine has a robust weight of 3,800 kg and is equipped with a cooling/filtration system from Transor Filter GmbH. If you are looking for a high-quality internal grinding machine, the Michael Deckel S22 internal grinder we have for sale is worth considering. Contact us for further details. • Operating voltage: 3 × 400 V • Electrical connection: 3P / N / PE • Frequency: 50 / 60 Hz • Rated current: 25 A • Fuse protection: 32 A • Power consumption: 15 kW • Control voltage: 24 V DC • Spindle speed: 300 - 8,000 RPM • Control unit: Michael Deckel S22 Kjdpfxsyr H Idj Adkoww • Grinding spindle speed: infinitely variable • Direction of rotation: right and left • Working speed: 40 m/s • Max. grinding wheel diameter: 150 mm • Max. grinding wheel width: 20 mm • Grinding heads: cylindrical and conical • Maximum diameter: 125 mm • Width: 50 mm • Clamping and grinding range • Max. workpiece diameter: approx. 250 mm • Max. workpiece length: approx. 900 mm • Max. grinding length: approx. 400 mm • Max. grinding length in work programs: approx. 320 mm • Tool holder taper: SK50 • Max. tool weight: 50 kg • X-axis travel: 400 mm • X-axis feed rate: 12 m/min • Y-axis travel: 310 mm • Y-axis feed rate: 12 m/min • Machine weight: 3,800 kg Additional equipment • Cooling/filtration unit: Transor Filter GmbH (2007)

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Brezsredinska okrogla brusilka Herminghausen SR2 Visokonatančna in konvencionalna brezsredinska okrogla brusilka. Stroj je primeren za brušenje obdelovancev do premera 40 mm. Visoka stabilnost stroja in brušenja zaradi robustnega litinskega ležišča in hidrodinamičnega segmentnega čeljustnega ležaja. Zaradi nizke vgradne višine je omogočen zelo dober dostop do vseh pomembnih funkcij. Hitra in enostavna prilagoditev za različne obdelovance in materiale. Kjdpfx Aoyvn Ubjdkeww Stroj je bil razstavljen, poškodovani deli zamenjani, na novo prebarvan in ponovno sestavljen. Mehansko in električno je v zelo dobrem stanju in takoj pripravljen za uporabo. Zagon in uvajanje/izobraževanje glede stroja in brusilne tehnike je mogoče.

Stanje: rabljeno, Leto izdelave: 1992, Grinding length 800 mm Grinding width 500 mm Kwedpfx Adowgnz Ajkew Workpiece height 400 mm Table size 800 x 400 mm Table speed 1 - 25 m/min Automatic cross feed 0 - 60 mm/stroke Grinding wheel dimensions 400 x 100 x 127 mm Grinding spindle speed 1400/2800 rpm Total power requirement 10 kW Voltage 380 V Machine weight approx. 6 t The machine is equipped with coolant system, automatic vertical feed, dresser unit, and stone holders.

Stanje: novo, Mobile trough vibratory finishing machine Type: TV25-M Trough Vibrator Manufacturer: Eurotec Innovation GmbH Gross Volume: 50 liters Mobile and Universal Kedpshmp Dqefx Adksww - Mobile vibratory finishing unit with integrated process fluid treatment - Integrated screening box for separating workpieces from media - Compact design with large working tanks including sound insulation - Plug & Play system: plug in the 230V power supply and start immediately Trough vibrators are characterized by their compact design and universal application. Their U-shaped working chambers allow for the processing of workpieces that are large relative to the overall machine size. Our TV mobile is unique in that all components required for vibratory finishing are mounted compactly and mobile on a transport trolley. An integrated cascade cleans the process liquid, workpieces can be separated via a screening box, and different media can be stored in pull-out compartments. The European Commission provides a platform for online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal), during which we first provide a non-binding offer. We will also inform you of our general terms and conditions and the right of withdrawal including imprint before purchase/contract conclusion.

Stanje: novo, Vibratory Tumbler for Mass Finishing, various sizes available. New machines! Manufacturer: Eurotec Innovation GmbH Model: RA11 Gross volume: approx. 250 liters Net volume: approx. 175 liters Rated power consumption: approx. 2.5 kW Channel width: 260 mm Connected load: 400V - 16A - 50Hz As a manufacturer of mass finishing plants, dryers, and process water technology, we can supply you with a wide portfolio of systems for deburring, grinding, and polishing. Kedpfx Ashmp Dfjdkjww Visit our website to learn more about our products. RA rotary vibrators are particularly suitable for processing bulk materials in high quantities. The gently inclined container floor reliably guides the workpieces onto the built-in screening surface. The large screen area with tangential outlet ensures reliable part separation and optionally offers the possibility to use magnetic separators. Depending on the size of components and batch quantities, RA rotary vibrators are available in various container sizes with volumes from 150 to 1,550 liters. Areas of application: - Mass finishing and polishing of bulk materials in large quantities - Descaling, derusting, deburring, edge rounding - Processing various materials (aluminum, steel, stainless steel, plastic, …) - Fine grinding and polishing of workpieces A corresponding electrical control panel is required to operate the system. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, telephone, messaging portal), in which we will first provide you with a non-binding offer. At the same time, we will inform you of our general terms and conditions and the right of withdrawal, including legal notice, before any purchase/contract is concluded.

Stanje: novo, Machine type: Trough Vibrator TV45 Pictured: TV45 incl. sound insulation and WS25 for part separation Manufacturer: Eurotec Innovation GmbH Rated speed: 1500 rpm Gross volume: 115 litres Internal container length: 850 mm Internal container width: 380 mm Internal container height: 395 mm Power supply: 400V - 16A - 50Hz APPLICATIONS: - Deburring, smoothing and polishing - Descaling, derusting and cleaning - Edge rounding - Surface finishing Kwjdof Sqdtjpfx Adkew ADVANTAGES: - Scraper edge to reduce component adhesion to the container inner wall - Especially economical, even with occasional use - Optionally available for pressure deburring and shot polishing - Robust design with a low-maintenance vibration motor - Integrated brackets for lifting and moving the unit with a pallet truck or forklift - Quick container emptying and media change via a generously sized drain opening for abrasive media - Quick-change polyurethane drain screen - Rubber-damped feet to reduce vibration transmission The stated price is net, plus 19% VAT and shipping. A suitable control panel is required to operate the unit. The pictures show the unit with optional accessories. The price refers to the base machine (TV45). ----- Please feel free to contact us; we are happy to advise you without obligation. ----- The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, telephone, messaging portal), where we will first send you a non-binding offer. At the same time, we will inform you of our general terms and conditions and the right of withdrawal, including our legal notice, before any purchase or conclusion of contract is made.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 256824, vhodna napetost: 230 V, največja hitrost vrtenja: 3.450 obr/min, vhodna frekvenca: 50 Hz, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Oddaja ponudbe zavezuje k pravočasnemu prevzemu bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNI PODATKI Hitrost vrtenja: 2.800/3.450 o/min PODROBNOSTI O STROJU Obratovalna napetost: 230 V Nazivni tok: 1,6 A Frekvenca: 50 Hz Mere in teža Dimenzije (D x Š x V): 400 x 400 x 1.200 mm Teža: 70 kg OPREMA Z nosilcem za svedre: 1,5-6,3 mm / 6,3-16 mm / 16-26 mm Kwjdpfx Ajynh I Dedkew Zunanja referenca: Lot 6/ Dommel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 5 h, številka stroja/vozila: 6178, Exhibition Machine: ACETI ART.70 Telescopic Belt and Polishing Machine with 2 Motors 4.4 kW, 400 Volt including 2 Inverters T2 Kwedpfxsi Hp Nro Adksw The machine is located in our test room in Kobenz. The machine is in as-new condition and has not been operated! GRINDING UNIT (left) - Belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - For grinding and polishing wheels: 300 x 35 mm - Maximum brush outer size: 300 mm - Maximum brush width: 75 mm - Motor shaft diameter: ø 35 mm - Peripheral speed: 22 - 44 m/sec Dimensions: W: 1650 x D: 600 x H: 2200 mm Noise Level: 73 dB Weight: 295 kg (without inverter)

Stanje: rabljeno, Leto izdelave: 1988, Primerno za samodejno, dvostransko brušenje zobnih površin na krožnih žagah z rezili iz karbidne trdine. Oprema: Delna zaščitna obloga, 1 nosilec žaginega lista, naprava za hlajenje. Zunanji premer krožne žage: 260 do 2200 mm Premer izvrtine krožne žage: 25 do 220 mm Debelina lista: do 20 mm Razmak zob: od 10 mm Naklon sekalne ploskve: poljuben Radialni prosti kot: do 6° Tangencialni prosti kot: do 6° Hod brušenja: do 75 mm Hitrost brušenja: 0,5 do 6 mm/s Delovna hitrost: do pribl. 10 zob/min Premer brusilnega kolesa: 125 mm Premer izvrtine brusilnega kolesa: 32 mm Obodna hitrost brusilnega kolesa: 26 m/s Kodpfx Adsyv Ic Sekeww Kapaciteta črpalke hladilne tekočine: 250 l/min Kapaciteta rezervoarja hladilne tekočine: pribl. 190 l Povezovalna moč pribl.: 6,5 kW (400 V / 50 Hz) Dimenzije D x Š x V: 3050 x 1890 x 2050 mm Teža pribl.: 2160 kg Barva: zelena

Stanje: novo, Leto izdelave: 2025, Dimensions (Length/Width/Height): 1400 x 1300 x 1800 mm Weight: 0 kg Total Power Requirement: 2.2 kW Saw Blade Sharpening Machine SAWMAX 600 ECO - Saw Blade Diameter min./max.: 80–800 mm - Saw Blade Bore: 10–200 mm - Max. Saw Blade Thickness: 1–7 mm - Tilting Range: 7–100 mm - Grinding Range for Rake Angle: -3° to +30° - Grinding Range for Clearance Angle: 6° to 40° - Grinding Range for Tooth Tip/Tooth Face Relief Angle: 45° - Adjustable Grinding Cycle Range: 0–25 mm - Grinding Speed: 0.5–6 mm/s - Max. Speed: 20 teeth/min - Negative Chamfer Grinding: -27° Kedpfx Asv A Hgkedkjww - Grinding Head Pivoting Range: 90° and 180° - Grinding Wheel Diameter: 125–32 mm - Peripheral Speed: 26 m/s - Coolant Pump Capacity: 25 L/min - Hydraulic Operating Pressure: 4.0 MPa - Oil Tank Capacity: 80 L - Total Power: 1.85 kW / 2.2 kW - Dimensions: L=1400 mm, W=1300 mm, H=1800 mm

Stanje: rabljeno, Leto izdelave: 2002, Geeignet zum automatischen Schleifen von Werkzeugen aller Art. Zubehör: Vollverkleidung Bandfilteranlage Knoll E53319 Software Numrotoplus Software Numroto einfache Fräser und Kordel, Software Numroto einfache und komplexe Bohrer Palettenlader CNC-Handrad Schaltschrankkühler, automatische Reitstock automatische Zentralschmierung Glasmaßstäbe an den Linearachsen X, Y, Z Meßtaster hydraulische Werkstückklemmung Kwodpeyv Hv Rsfx Adksw Ölauffangwanne 2 Laderpaletten, 1 Schleifscheibenaufnahme, Verfahrweg X-Achse: 800 mm Verfahrweg Y-Achse: 270 mm Verfahrweg Z-Achse: 660 mm Verfahrweg B-Achse: 400° Eilgänge: 30/15/30 m/min Werkzeugaufnahmekonus: ISO 50 Schleifspindelantriebsleistung: 12 kW Schleifspindeldrehzahl stufenlos: max. 9000 U/min., Schleifscheibendurchmesser: max 203 mm Anschlußwert ca.: (400 V /50Hz) Abmessungen L x B x H: 1900 x 2300 x 2300 mm Gewicht ca: 5400 kg Farbe: Grau / Gelb

Stanje: rabljeno, Leto izdelave: 2004, Primerno za samodejno brušenje oziroma obnavljanje zob in posnemanje robov HSS in segmentnih žag ter VHM žag z uporabo keramičnih brusnih plošč ter za globinsko brušenje s CBN oziroma diamantnimi brusnimi ploščami. Ksdpow I Sk Nofx Adkjww Oprema: - Popolno ohišje, - Magazin za žagine liste s 3 skladišči višin 250 mm (za približno 35 žaginih listov vsak) #9007511, - Naprava za samodejno posnemanje robov žaginih listov od Ø 145 mm naprej, - Samodejno navajanje brusne plošče, - Samodejna protipožarna naprava, - Samodejno centralno mazanje, - Hladilni sistem 400 L s hladilnim rezervoarjem in filtrirno enoto, - Strojna svetilka, - Lovilna kad za olje, - 3 vretenca za žagine liste (nalagalnik). Premer žaginega lista: 40-710 mm Razdalja med zobmi: 1 - 55 mm Število zob: 2 - 998 Debelina žaginega lista: max. 8 mm Premer brusne plošče: 200 x 32 mm Priključna moč: 10 kW (400 V / 50 Hz) Teža: cca 3200 kg Dimenzije: D x Š x V = 1198 x 1750 x 2015 mm Barva: modra/siva RAL 7047 / modra RAL 250-50-20.

Stanje: rabljeno, Leto izdelave: 1997, Suitable for the automatic grinding of tooth geometry on the rake face and clearance face (front and back) of carbide-tipped circular saw blades. All standard tooth forms can be completely ground in one cycle (including trapezoidal-flat teeth). Accessories: - Motorized rake and clearance angle adjustment - Manual central lubrication - Full enclosure - Wet grinding system - 1 arbor - 2 saw blade magnetic holders - 4 centering sleeves - 1 grinding wheel holder Circular saw blade diameter: 80-810 mm Saw blade bore diameter: from 10 mm Ksdpfxoyv Hq Ue Adkjww Body thickness: up to 5 mm Tooth pitch: 7 - 100 mm Rake angle: -20° to +40° Clearance angle: 6° to 45° Back face bevel grinding: up to 45° Front face bevel grinding: up to 15° Max. grinding stroke: 20 mm Grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Connected load: 1.6 kW (400 V / 50 Hz) Weight approx.: 650 kg Dimensions (W x D x H): 1860 x 1010 x 1970 mm Colour: turquoise RAL 5018 / grey RAL 7035

Leto izdelave: 2026, stanje: novo, Suitable for dressing and profiling diamond and CBN grinding wheels. Equipment: 2/3-camera system with 15-inch LCD monitor (camera with 15-120x zoom), glass scale on X and Y linear axes, high-precision angle measuring device (0.05°), 2 halogen lamps 12 V, diamond/CBN wheel spindle infinitely adjustable from 100 - 1000 rpm, truing wheel speed infinitely adjustable from 200 - 2000 rpm, stepless oscillation speed, automatic central lubrication, manual dressing device for silicon wheels, spindle motor: peak power 3 HP (2.25 kW), dressing motor: peak power 2 HP (1.5 kW), plexiglass splash guard, extraction, telecentric camera with PC for importing .dxf files optionally available. Kodpfod S Tbnsx Adkeww Technical data: Grinding wheel interface HSK 50 E, diamond grinding wheel diameter 50 - 350 mm, max. grinding wheel width 70 mm, diamond/CBN wheel spindle speed infinitely adjustable from 100 - 1000 rpm, grinding wheel radius 0-R30 mm, dressing wheel 180 x 25 x 32 mm, dressing wheel rotation speed 200 - 2000 rpm, oscillation stroke of the dressing wheel 0-70 mm, dressing wheel motor connection power 0.75 kW, weight approx. 1520 kg, dimensions 1340 x 1300 x 1900 mm, color signal white RAL 9003 / red.

Leto izdelave: 2026, stanje: rabljeno, Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Accessories: - Full enclosure - Heavy-duty grinding wheel motor, 4 kW - Heavy-duty dressing wheel motor, 2.2 kW - 2 machine lights, 12 V - Glass scale on X and Z linear axes - 2/3" camera system with 17" LCD monitor (microscope with 15-120x zoom) - High-precision angle measuring device (0.05°) - Diamond/CBN wheel spindle, infinitely variable, 100 – 1000 rpm - Dressing wheel speed, infinitely variable, 200 – 2000 rpm - Continuously adjustable oscillation stroke speed - Automatic central lubrication - SIC manual dressing wheel Grinding wheel mount: HSK 50 E Diamond grinding wheel diameter: 50 – 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Diamond/CBN wheel spindle speed: infinitely variable, 100 – 1000 rpm Grinding wheel radius: 0–30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Dressing wheel speed: 200 – 2000 rpm Kedpfjlfil Sox Adkjww Dressing wheel oscillation stroke: 0–70 mm Dressing wheel motor rating: 2.2 kW Weight approx.: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm

Leto izdelave: 2026, stanje: novo, Suitable for dressing and profiling diamond and CBN grinding wheels. Kjdpfxsfpxd Ao Adkoww Accessories: - Motor upgrade (reinforced motors for the drive of the dressing wheel and the wheel to be dressed) - Reinforced grinding wheel motor with 4 kW - Reinforced dressing wheel motor with 2.2 kW - 2 machine lights, 12 V - Glass scales on the X and Z linear axes - 2/3" camera system with 19" LCD monitor (microscope with 15-70x zoom) - High-precision angle measuring device (0.05°) - Infinitely variable diamond/CBN wheel spindle speed 100 - 1000 rpm - Dressing wheel rotational speed infinitely adjustable 200 - 2000 rpm - Continuously variable oscillating stroke speed - Automatic central lubrication - SIC manual dressing wheel - Protective cover Technical data: - Grinding wheel mount: HSK 50 E - Diamond grinding wheel diameter: 50 - 250 mm - Max. grinding wheel width: 70 mm - Grinding wheel bore diameter: 20 mm - Diamond/CBN wheel spindle speed, infinitely adjustable: 100 - 1000 rpm - Grinding motor: 4 kW - Cross travel: 200 mm - Longitudinal travel: 140 mm - Grinding wheel radius: 0-R30 mm - Dressing wheel: 180 x 25 x 32 mm - Dressing wheel rotational speed: 200 - 2000 rpm - Oscillation speed: 3400 mm/1 mm (infinitely adjustable) - Oscillation stroke of the dressing wheel: 0-70 mm - Drive rating of dressing wheel motor: 2.2 kW - Weight: approx. 900 kg - Dimensions: 1165 x 1150 x 1950 mm - Colour: White RAL 9003.

Leto izdelave: 2026, stanje: novo, Suitable for dressing and profiling diamond and CBN grinding wheels. Ksdpfx Ajd R Naasdkoww Equipment: Fully enclosed Rush camera system with high-resolution B/W camera (15x, 30x, 60x zoom), automatic zoom control, video overlay (CAD drawing on live image) with 22" LCD monitor and Rushvision software, onboard PC with Windows and 17" monitor, glass scale on X and Z linear axes, 2 machine lights (12 V), automatic infeed and swiveling via servo motors, touch control panel, automatic home position at the end of the work cycle, automatic central lubrication. Technical Data: Grinding wheel mount: HSK 50 E, diamond grinding wheel diameter: 50 – 250 mm, max. grinding wheel width: 70 mm, grinding wheel bore diameter: 20 mm, infinitely variable speed of the diamond/CBN grinding spindle: 100 – 1000 rpm, drive power of grinding wheel motor: 1.75 kW, grinding wheel cross travel: 160 mm, longitudinal travel: 120 mm, grinding wheel radius: 0 – 60 mm, dressing wheel: 175 x 12 x 32 mm, continuously variable dressing wheel speed: 200 – 2000 rpm, infinitely variable oscillation speed of dressing wheel: 3400 mm/min, infinitely variable oscillation stroke: 0 – 50/min, dressing wheel motor output: 0.75 kW (400 V / 50 Hz), weight approx. 1520 kg, dimensions: 1340 x 1300 x 1900 mm, color: grey/red.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Description to follow! Kwsdpfxoynmn As Adkew

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, SINUS – magnet JUNG modela HF 50 RD Širina x globina: 450 x 175 mm Razmak: 9 mm Ksdpfsyr Rfmex Adkeww

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 19780, Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 375 mm Spindle speed range: 1,000 – 3,000 rpm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 2.8 – 8.4 kW Kedpfscxxrzox Adkeww Machine weight approx.: 3.5 t CNC-controlled surface grinding machine with 3D-controlled profile dresser, ELB CNC control unit Unicon with integrated electronic handwheel, monitor, analogue spindle load indicator, infinitely variable cross feed, coolant system with magnetic roller separator, full enclosure, separate control cabinet, additional grinding wheel with flange.

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Kwjdecxxtmspfx Adkjw Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: novo, Dvojni sinusni nastavljiv podstavek z fino-polno magnetno vpenjalno ploščo Magnetna vpenjalna plošča z mehanskim vklopno/izklopnim stikalom. Natančna in stabilna konstrukcija. Nastavljiva v 2 oseh. Za vpenjanje in obdelavo obdelovancev pod katerim koli želenim kotom. Enakomerna oprijemalna sila na površini polov. Natančna nastavitev kota z uporabo končnega merila. Dolžina: 300 mm Širina: 150 mm Višina: 142 mm Kjdpeymzpfofx Adksww Kot: 0–60° Teža: 37,5 kg