Ploskovno-brusilni stroji

STEFOR RTB 8/5

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, število valjev: 3, Premer zgornjega valja 280 mm, 12 mm predupogib, zmogljivost 18 mm (3x premer zgornjega valja). Teža 7.100 kg. Hsdpfx Aewtp Hajg Tji

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Hjdpfxerz Nflo Ag Toi Electronics: The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left Hjdpfxecxxycs Ag Tsi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 770 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, širina mize: 1.000 mm, dolžina mize: 4.150 mm, obremenitev mize: 4.000 kg, 3-Axis Machining Centre Hodpfxswycmms Ag Toi Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg Feed rate X-axis: 30,000 mm/min Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 50 kW Spindle speed: 4,500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TET351P5-offAD-Bypass - 2200373733, hladilna zmogljivost: 66 kW (89,73 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 1.082 kg, okoljska temperatura (maks.): 46 °C, temperatura okolja (min.): −5 °C, vhodna napetost: 400 V, pritisk: 6 letvica, temperatura: 7 °C, volumenski pretok: 11,2 m³/h, tlak črpalke: 4,68 letvica, skupna širina: 866 mm, skupna dolžina: 2.250 mm, skupna višina: 2.054 mm, trajanje garancije: 3 meseci, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, Process Chiller / Air-Cooled Water Chiller, Hsdpfx Agowlt Rao Toi Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass units are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open filling system/tank attached - Bypass with manual valve between water inlet and outlet Chilled water outlet temperature adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3, Max. power consumption (kW): 39 Max. current (A): 68 Starting current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial No.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technically OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to use. (Subject to technical changes and prior sale!)

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WAU 1001 Cat. no.: 11741 Pumping speed: approx. 1000 m³/h Condition: Fully overhauled Warranty: 12 months Delivery time: ex stock Hedpfx Aeb Rnfieg Tji

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Hjdpfx Agjwgizdj Tji Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight: approx. 12.5 t Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hedpfxewxz D Uj Ag Toi Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Težka konstrukcija ogrodja Vzdolžno pomikanje X-os: 1800 mm Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, Razdalja med centri: 650 mm Notranji / zunanji premer Hsdswu Tdfspfx Ag Tsi 2-osni SONY digitalni prikazovalnik Rezervoar za hladilno tekočino

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Hjdjrthkuepfx Ag Toi Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)