Ploskovno-brusilni stroji

JAKOBSEN SJ24

Stanje: rabljeno, skupna višina: 2.000 mm, skupna dolžina: 2.600 mm, skupna širina: 1.800 mm, Lastna teža: 3.500 kg - Dokumentacija na voljo: Da - CE certifikat na voljo: Ne - Upravljanje: Konvencionalno - Moč motorja: 4,5 kW - Pomik po osi Z: 510 mm - Model: kslijper - Pomik po osi X: 600 mm - Premer brušenja: 350 mm - Pomik po osi Y: 350 mm - Dolžina mize: 800 mm - Velikost magneta: 600 mm - Širina mize: 350 mm Kodpfx Abexpgwrshsnd - Transportne mere: 2600 mm x 1800 mm x 2000 mm (d x š x v) - Transportna teža: 3500 kg - Število transportnih paketov: 1 Finančne informacije DDV: Navedena cena je brez DDV Odbitni DDV: DDV odbiten za podjetja Dostava in odkup možna kadarkoli za vse iz industrijskega področja Bram van Summeren

Stanje: rabljeno, številka stroja/vozila: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Max. projection of main saw blade: 72 mm Number of clamps: 6 Kodpfx Asu N Sliebhjnd

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Ksdex Ug Dopfx Abhsnd Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Kodpfx Aok Ixl Asbhond Subject to prior sale and errors in description. VAT will be itemized separately on my invoices. Shipping via freight forwarder.

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Power supply: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm Ksdpfx Ajd Hl Stjbhsnd

Stanje: rabljeno, Leto izdelave: 2018, x-travel 1,800 mm y-travel 700 mm z-travel 700 mm Control 840 D sl op. (CELOS) Siemens Main spindle speed range 20 - 20,000 rpm Main spindle drive power 35 / 25 kW Max. torque 130 / 86 Nm Tool holder HSK-A63 Tilting B axis: +/- 100° Clamping table surface 2,100 x 700 mm Max. table load (1,500) kg Number of T-slots 7 Table diameter 750 mm Max. rotary table load 500 kg Number of T-slots 7 T-slot pitch 63 mm Table height 255 mm Rotary C axis: 360° Rotary speed 16 rpm Resolution 0.001° Number of tool stations 60 positions Tool holder HSK-A63 Max. tool weight 6.0 kg Max. tool diameter 80 mm Max. tool diameter with free adjacent pocket 130 mm Max. tool length 300 mm Tool change time chip-to-chip 7.6 sec Rapid traverse (X / Y / Z) 40 m/min Acceleration 4 m/s² Max. feed rate 40,000 mm/min Feed force (X / Y / Z) 8 kN Total power requirement 73 kVA Knodpfx Aexr Racjbhjd Machine weight approx. 13.7 t Space requirement approx. 7.5 x 6.5 x 3.0 m 5-axis CNC travelling column milling machine DMG MORI - DMF 180-7 - SpeedMaster motor spindle - Swivel milling head (B-axis) - Rotary table integrated into fixed table - Internal coolant supply - Spindle, Y-axis and B-axis clamping overhauled in 04/2025

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. Knedowk Nm Ispfx Abhed 10.000 min⁻¹

Stanje: dober (rabljeno), Leto izdelave: 2007, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Distance between centers: 1,250 mm Swing diameter over bed: 600 mm Cross travel: 320 mm Main spindle: Speed range – main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 stations Total connected load: 42 kVA Knsdpfx Asucl Alsbhod Machine weight: approx. 5.0 t Space requirements: approx. 3.6 x 2.14 x 1.95 m Accessories: coolant gun, Schunk chuck 315 mm, tailstock MK 5

Stanje: rabljeno, Leto izdelave: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universelle, CNC-gesteuerte Zahnstangenfräsmaschine Typ: UZFM - V 300 H - CNC Baujahr: 1990, Seriennummer 90-244x Technische Daten: - Maximale Verzahnungslänge: 2.100 mm - Maximaler Fräsweg/Fräsbreite quer: 300 mm - Modulbereich (Stahl/Grauguss) bis max. 16/18 - Tischaufspannfläche: 510 x 2.400 mm bzw. 275 x 2.120 mm - Einbauhöhe unter Frässpindelachse (min./max.): 150 / 430 mm - Fräser-Durchmesser (min. / max.): Ø 125 mm + 2 x Schnitttiefe / Ø 280 mm - Max. Fräserbreite (fliegend / mit Gegenlager): 50 / 140 mm - Fräserdorn-Durchmesser max.: 22 - 50 mm - Frässpindelkopf schwenkbar für Hinterfräsungen: rechts 30°, links 45° - Frässchlitten schwenkbar für Schrägverzahnungen: ±30° - 9 Spindeldrehzahlen: 40 - 120 U/min - Stufenlos regelbare Vorschübe (Frässchlitten) / Eilgang: 0 - 1.300 / 2.000 mm/min - Tisch-Eilgang: 10.000 mm/min - Frässpindelantrieb: 5,5 kW - Gesamtantriebsleistung: 10 kW, 400V, 50 Hz - Maschinengewicht: ca. 5.000 kg Zubehör / Sonderausstattung: - SIEMENS CNC-Steuerung Modell M 810 für die Teilachse (X), schnelle Umrüstung ohne Wechselräder, programmierbare Teilungsdistanzen ab 0,001 - 2.100 mm - Einstellung aller Vorschub- und Eilgangswege hydraulisch, Vorschubeinstellungen für 2 Schnitte, Wegbegrenzung über voreinstellbare Endschalter - Hydraulische Werkstückspannvorrichtung, Spannlänge ca. 2.000 x 160 mm - Verstärkter Fräskopf mit stufenlos regelbarer Fräserdrehzahl - Separater Schaltschrank und Hydraulikanlage, im Tisch integrierter und separat aufgestellter Späneförderer mit Kühlmittelausstattung, Zentralschmierung - Nachrüstung mit aktueller SIEMENS-Steuerung möglich ENGLISCH (MACHINESEEKER/INDUSTRY STYLE) D O N A U - K N A P P (Germany) Universal CNC-Controlled Rack Milling Machine Model: UZFM - V 300 H - CNC Year: 1990 - Serial No.: 90-244x Technical Details: - Max. cutting length: 2,100 mm - Max. cross milling stroke/width: 300 mm - Module capacity (steel/cast iron): max. 16/18 - Table clamping area: 510 x 2,400 mm or 275 x 2,120 mm - Mounting height under spindle (min./max.): 150 / 430 mm - Cutter diameter (min. / max.): Ø 125 mm + 2 x cutting depth / Ø 280 mm - Max. cutter width (unsupported / with counter bearing): 50 / 140 mm - Cutter arbor diameter max.: 22 - 50 mm - Milling head swivelling for relief cuts: right 30°, left 45° - Milling slide swivelling for helical gearing: ±30° - 9 spindle speeds: 40 - 120 rpm - Infinitely variable feeds (milling slide) / rapid traverse: 0 - 1,300 / 2,000 mm/min - Table rapid traverse: 10,000 mm/min - Milling spindle drive: 5.5 kW - Total electrical load: 10 kW, 400V, 50 Hz - Machine weight: approx. 5,000 kg Accessories / special equipment: - SIEMENS CNC-control model M 810 for indexing axis (X); rapid changes possible without change gears, programmable indexing distances from 0.001 - 2,100 mm - All feeds and rapid traverse adjustable via hydraulics, feed presets for 2 cuts, travel limits with pre-adjustable limit switches - Built-in hydraulic workpiece clamp, clamping area approx. 2,000 x 160 mm length - Heavy-duty milling head with stepless spindle speed adjustment - Separate control cabinet and hydraulic unit, integrated and free-standing chip conveyors with coolant equipment, central lubrication Knjdpet Hwwqefx Abhjd - Retrofitting with modern SIEMENS control possible Please let me know if you require this in another

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 with tailstock and base plate. Knjdpfxegabu Uo Abhed