Zgornja rezkalnica, namizna rezkalnica, modelarska rezkalnica

Zimmermann FZ0

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Universal Table Router FZ0 by Zimmermann Modelmaking milling machine with adjustable Bosch motor GGS 27 LC Ideally suited for model making and tool & die manufacturing. Drive motor: 230V, 0.6kW Spindle speed adjustable: approx. 12,000 – 27,000 rpm Machine table: approx. 590 x 420 mm Gjdpfx Adow Ip Dgo Asip Aggregate tilting both sides up to 90 degrees Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Including the milling cutters and router bits shown Comes with a lockable base cabinet, 2 drawers, 1 door, key included The previous owner fitted the base cabinet with an angled aluminum sheet, offering an integrated extraction option, see photos Waldmann task light with integrated magnifier Original paint, touched up in some areas CE marking Very well-maintained machine from prototype manufacturing in the motorsport division of a well-known Wolfsburg automotive manufacturer. Has apparently seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be inspected and demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse. Please see "other offers from this supplier."

Stanje: pripravljen za uporabo (rabljen), Na voljo je konvencionalni stružni stroj z vodilno in vlečno vreteno. Možen je ogled na lokaciji. Gijdjxcx Ayjpfx Ad Aep

Stanje: dober (rabljeno), prevoženi kilometri: 611 km, barva: oranžna, dvižna višina: 6.500 mm, Leto izdelave: 2006, obratovalne ure: 4.225 h, Namen uporabe: gradbeništvo CE oznaka: da Tehnično stanje: dobro Gisdpfxjwakzrj Ad Asp Vizualno stanje: dobro Dobavni pogoji: EXW Država proizvodnje: Nemčija Za več informacij se obrnite na Vink Machinery. Boki Kiefer HY1251 s Palfinger PK 2700 A * 2006 * Dizel * 4.225 delovnih ur * 611 kilometrov * 6,5 metra višina kljuke * 5 metrov vodoravni doseg * Dvižni moment 2,6 t/m * Lastna teža 2.370 kg * Opremljen s prekucno nadgradnjo * Vključno z žerjavsko knjižico in dodatno dokumentacijo

Stanje: rabljeno, Universal milling head, milling arbor, milling extension, angle milling head -Spare part from a: WMW HECKERT milling machine -Quantity: 1 piece angle milling head -Output taper: SK50 -Input: gear drive -Milling head: fully swiveling -Bore diameter: mm -Bolt circle: mm Gisdpjd Nz Dpjfx Ad Aop -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, including acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Switchable spindle brake >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty, with operating manual >> New 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Gsdpeymznhjfx Ad Aeip On request: Covers for lead and feed screws About the machine: Offered here is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been reground or newly scraped. Acceptance according to inspection protocol. Painted in 2K glossy white. Accessories such as Multifix and chuck are new. For safety: The machine features a brake motor, electronic spindle guard, and two emergency stops. This is an as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely operator-friendly and allows for ground-like surface finishes. Take the opportunity to view and test this machine on site under power and see the condition for yourself.

Stanje: novo, Dolžina upogibanja: 1050 Debelina pločevine: 1 Premer zgornjega valja: 56 Tehnični podatki: - Ohišje iz sive litine - Ročno ali motorizirano (opcijsko) upogibanje - Po upogibu se zgornji valj odpre na stran za enostavno odstranitev materiala - Naprava za stožčasto upogibanje - Premikanje zadnjega in spodnjega valja ročno z volanom navzgor in navzdol - Prenosna upravljalna konzola - V skladu s CE standardi Opcije: - Zadnji valj z motorjem - Digitalni prikaz položaja zadnjega valja - Pokrov ohišja - Kaljeni valji EURO 396, -- Gisdpsd Ab Uysfx Ad Aep Imamo veliko referenc!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Razdalja med konicama: 750 mm Premer struženja nad posteljo: 430 mm Vretenina odprtina: 42 mm 24 hitrosti: 14 - 1400 vrt/min Pogonska moč: 5,5 KM Teža cca: 2 t Oprema: lyneta, Multifix, Forkardt-patrona Stanje: Stroj deluje dobro; vzdolžno vodenje ni več v dobrem stanju. Stroj je ugoden in primeren le za enostavnejša dela. Gedpfx Adeycrwfs Aoip

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Lathe Type: Ucimu BRF150 380V Distance between centers: 800 mm Spindle bore: 35 mm Tool height: 25 mm Swing over cross slide: 180 mm Swing over bed: 320 mm 4-jaw chuck Morse taper 2 (MT2) in tailstock Gsdpfxjwurt So Ad Asip

Stanje: rabljeno, prevoženi kilometri: 32.789 km, moč: 92 kW (125,09 KM), prva registracija: 03/1958, vrsta goriva: dizel, lastna masa: 5.670 kg, največja dovoljena obremenitev: 3.630 kg, skupna masa: 9.300 kg, konfiguracija osi: 4x4, medosna razdalja: 3.680 mm, zavore: zaviranje z motorjem, barva: rdeča, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, vzmetenje: jeklo, število sedežev: 7, skupna dolžina: 6.500 mm, Oprema: pogon na vsa štiri kolesa, Nezavezujoča ponudba – pridržujemo si pravico do sprememb in vmesne prodaje – prodaja poteka brez vsakršnega jamstva – vsi podatki brez garancije! Gjdpfxewm Nudo Ad Ajip

Stanje: rabljeno, Leto izdelave: 1992, obratovalne ure: 2.275 h, Zračni kompresor    • Delovni tlak: 8 barov    • 2275 ur Gijdsx E Tnfspfx Ad Aep    • Cestna razsvetljava    • Popolnoma delujoč Stanje: Rabljeno Leto izdelave: 1992