Sistem za ločevanje olja in voda za kompresorje

Atlas Copco OSC DIBT 95

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, including acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: MT 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Switchable spindle brake >> Drive power: 2.0/4.0 kW >> Dimensions: length 2.2 m, height 1.5 m, depth 1 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty, with operating manual >> New 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: Bwjdpfx Aeymznhsh Ter >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons On request: Covers for lead and feed screws About the machine: Offered here is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been reground or newly scraped. Acceptance according to inspection protocol. Painted in 2K glossy white. Accessories such as Multifix and chuck are new. For safety: The machine features a brake motor, electronic spindle guard, and two emergency stops. This is an as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely operator-friendly and allows for ground-like surface finishes. Take the opportunity to view and test this machine on site under power and see the condition for yourself.

Stanje: novo, Bernardo Drill Bit Grinding Machine DG 32 Pro Specifications Drill bit diameter: 2 – 32 mm Point angle: 90° – 135° Speed: 4800 rpm Bodpfx Asgd H U Ush Tswr Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • Diamond grinding wheel SBC • ER 20 collets, 3 – 12 mm, set of 10 (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, set of 20 (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • Collet holders ER 20 and ER 40 Features • Includes a point thinning device for better centering of the drill bit tip on the workpiece and reduced required feed force • 30 ER collets included, suitable for clamping intermediate sizes • Additional station for grinding the drill bit clearance angle • Universally adjustable point angle from 90° to 135° • Rotor with precision ball bearings ensures smooth operation • Fast, precise results thanks to easy operation • Vibration-free running due to high dead weight and rubber feet

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 690924, Connected load 380V 1.84 kW Speed 2840 rpm Number of spindles: 21 pcs, 32 mm pitch Spindle distance 640 mm Spindle rotation direction: 11 right-hand, 10 left-hand, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Bwjdpfx Aoh U Damjh Tjr Unfortunately, we are unable to respond to inquiries without complete contact information.

Leto izdelave: 1988, stanje: dober (rabljeno), Kompletan Atlas Copco kompresor zraka uključujući Donaldson Ultra Filter i spremnik, u dobrom radnom stanju. Bjdpfx Ahjhpx U Aj Tjwr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, model krmilnika: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-scoring saws, and a patented central angle retracing system which reduces cycle times by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor rated at 18.0 kW. For further information on this panel saw, please contact us. Additional Equipment • Air cushion table with roller elements 2160 x 650 mm: 4 units • Central blower: 1 unit Machine Advantages Quality-related advantages • CE-certified, GS-certified, FPH wood-dust certified • Divisions: 75/275/475/1050/1850/2650/3450 mm measured from the angle stop to the center of the clamp • Possibility to mount 2 additional two-finger clamps • 4 manual alignment fences on clamps • Possibility to mount 1 additional single-finger clamp • Air cushion table nozzle spacing: 70 x 70 mm Technical advantages • Scoring saw motor: 2.2 kW • Operating voltage: 400 V / 50 Hz • Electrical connection value at HS motor: 18.0 kW = 24 kW, 21.0 kW = 27 kW • Positioning accuracy: +/- 0.1 mm/m • Gentle material transport, permanent positioning accuracy, no lubrication required, high program pusher speed, maintenance-free, full stability of the steel table retained, easy and cost-effective replacement of phenolic resin plates, minimal cylinder wear, uniform pressure application, minimal trim cut, significantly reduced cycle times, top cut quality, minimal setup times, cycle time reduction, electronically adjustable pressure force • Cutting length: 4300 mm • Cutting width (program pusher travel): 4250 mm • Roller conveyor (10-track element): 1 unit • Roller conveyor (2-track element): 5 units • Clamps: 7 units (first 3 are two-finger, remaining are single-finger) Additional Information Machine still under power. Bjdpfx Aoyaiiyjh Tswr

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za vstavljanje moznika z upravljalno pištolo za sočasno nanašanje lepila in vstavljanje moznika Bwodpfx Ajqu N U Deh Ter Standardni mozniki premera 8 mm Dolžina moznika: 25–80 mm Nazivna zmogljivost: 1 moznik na sekundo (vključno z nanašanjem lepila) Uporablja lepila PVA (vodna disperzija), viskoznost 200–400 mPa 1 kos REZERVOAR ZA LEPILO, kapaciteta 8 kg 1 kos REZERVOAR ZA VODO, kapaciteta 8 kg Maksimalni tlak: 5 bar

Stanje: novo, Leto izdelave: 2025, Rotary vane dry vacuum pump. Available in stock. Brand new pump. Comes with a 12-month warranty. Nominal flow rate: 25 m³/h at 50Hz. Bodpeftzpvsfx Ah Tswr Ultimate vacuum: 150 mbar abs. For any questions, please contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 75.000 h, Funkcionalnost: popolnoma funkcionalen, Kompresor 55 kW z vgrajenim sušilcem in frekvenčnim pretvornikom. Zelo dobro stanje. Po servisu. 3 mesečna garancija. Bwsdpev Rmmmsfx Ah Ter

Leto izdelave: 1990, stanje: dober (rabljeno), Compressor system with air dryer and compressed air tank. Length: 800 mm Bwodpjinur Ajfx Ah Tor Width: 800 mm Height: 1000 mm Flow rate: 1.5 m³/min Power: 11 kW

Stanje: novo, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Bodjd N S T Dspfx Ah Towr Sliding table: 3200 x 400 mm Edging length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Main motor output (S1 100%): 5.5 kW (7.5 HP) Main motor power consumption (S6 40%): 7.5 kW (10.0 HP) Scoring motor output: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre gauge • Eccentric clamp • Table widening • Extendable telescopic fence • Rip fence flaps • Support table with roller • Push stick • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double-roller carriage with central and end position locking for precise cuts • Maximum saw blade diameter of 400 mm for cutting heights up to 125 mm • Support table with roller for easy handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Equipped as standard with independently driven scoring unit (motor output 0.75 kW) • Robust saw unit with dual-sided, cast-iron guided swivelling elements • Table widening for cutting widths up to 1300 mm included • All aluminium parts (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously adjustable from 90° to 45°