20-29-559 Stroj za brušenje s širokim trakom

WOODLAND MACHINERY RP630

Stanje: novo, Typ R-RP630 Arbeitsbreite: 630 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe (Werkstückdicke): 3-110 mm Vorschubgeschwindigkeit: 6-30 m/min Gesamtmotorleistung: 20,25 kW Motorleistung erste Einheit: 11 kW Motorleistung zweite Einheit: 7,5 kW Vorschubmotor: 1,5 kW Hubmotor: 0,25 kW Walzendurchmesser erste Einheit: 190 mm Walzendurchmesser zweite Einheit: 190 mm Schleifbandabmessung: 650 x 1920 mm Betriebs-Luftdruck: 0,6 MPa Absaugvolumen: 8.000 m³/h Transportmaße (LxBxH): 1.900 x 1.200 x 2.100 mm Gewicht: 1.200 kg Dkedpfx Apodflp Iswsu

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. Dkjdpfjiidm Nox Apwou The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available - Djdpsi Dfidofx Apweku

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Dkedpfxepgkmwo Apwou Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Dkedpfxjhp Rcre Apweu Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Dksdpfedqzh Rex Apwju Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change Dsdpjqlckpjfx Apwjku 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Leto izdelave: 1984, stanje: dober (rabljeno), Der auf dem Tisch rot markierte Teil ist nicht dabei. Dodslz Izlspfx Apweku

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), Automatic slot mortiser with dual tables and oscillating spindles BALESTRINI 2CAP Maximum mortise length: 120 mm Maximum mortising depth: 80 mm Spindle speed: 9000 rpm Spindle motor: 3 Hp Oscillation motor: 1 Hp Djdsgmucpspfx Apweku Pneumatic workpiece clamping Overall dimensions: 1000 x 900 x 1250 mm Weight: 500 kg

Leto izdelave: 2016, stanje: delavnici obnovljeno (rabljeno), Agregat z 2 hidravličnima pritisnima čevljema od zgoraj za brezpremični pritisk lepljenih deskastih lamel v mehanski stiskalnici. (Namesto velikega kladiva ali težkih uteži na žerjavni kljuki) Pogon SEW z reduktorskim motorjem in trenjskim kolesom 1,1 kW. Hidravlični agregat 5,5 kW. Prostornina oljnega rezervoarja: 160 l. Tlak: 40 / 250 bar. Stroj je bil leta 2012 v celoti obnovljen in opremljen z novo elektro omaro in novo električno napeljavo. Ker stranka ni plačevala obrokov, smo stroj po približno 1,5 letih ponovno prevzeli. Stroj je bil v uporabi največ 1 leto v urnem režimu. Dkjdpfod Dcmqex Apwju