Ekscentrični tisk

WMW PEDV10/II-S

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Gbedpfx Asfx Hv Hjhmsn Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: novo, Leto izdelave: 2026, Komplett automatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit bedienerfreundlicher Automatisierung. Legen Sie einfach ein Aluminiumprofil auf, die Maschine erkennt dieses automatisch und schneidet es positionsgenau durch servomotorische Materialzuführung in die zuvor definierten Aufträge. Schneidlisten können per Excel-Jobliste und WIFI sehr einfach und effizient eingespielt werden – ideal zur Verarbeitung großer Stücklisten. Für jedes zu schneidende Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die exakte Länge. Unser leistungsfähiger Optimierungsalgorithmus berechnet in Echtzeit die optimale Schnittreihenfolge zur Minimierung des Materialverschnitts. Die Maschine führt die berechnete Schnittliste vollautomatisch und ohne Unterbrechung aus. Es sind keine weiteren Eingaben oder Bedienhandlungen notwendig – legen Sie einfach das nächste Profil ein. Einfaches, schnelles Alternativsystem zu klassischen Doppelgehrungssägen. Geben Sie nur die gewünschten Längen und Winkel ein oder importieren Sie diese, und starten Sie den automatisierten Schneidprozess. Die Maschine fertigt Ihre Gehrungsteile kontinuierlich, hochpräzise und mit hoher Geschwindigkeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den automatischen Betrieb, Auftrag eingeben und in Sekunden starten • Vereinfachte Bearbeitung von Einzelteilen, Batches oder umfangreichen Excel-Stücklisten • Bündel-/Mehrfachprofilzuschnitt mit automatischer Stückzählung • Ferneingabe von Excel-Joblisten per WIFI inklusive umfangreicher Datenzuordnung • Komplett einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Prozessproduktivität • Automatischer Optimiermodus mit Laserlängenmessung und Verschnittminimierung (optional) • Automatische Etikettierung der Zuschnitte anhand der Jobdaten (Etikettenanbringung manuell, optional) • Online-Direktdruck der Teilebezeichnung direkt auf das Material ohne Bedienereingriff (optional) • Barcodes oder QR-Codes zum Drucken oder Scannen bei der Auftragseingabe (optional) • Automatische servo-gesteuerte Positionierung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Fenster- und Türenfertigung • Herstellung von auf Gehrung gearbeiteten Aluminiumkonstruktionen • Herstellung von Aluminium-Bauteilen • Composite-Fertigung • Herstellung von Jalousien, Beschattungselementen und Möbeln • Aluminiumhandel und Einzelverkauf Gedpfx Aof Ekn Dehmjbn Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkapazität: 20 – 40 kg Software: Optimiser QUALITÄT AUS AUSTRALIEN – MADE IN AUSTRALIA.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Additional equipment Gbodpfxoyv H Tij Ahmsn • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Stanje: rabljeno, Leto izdelave: 2009, Tlak 40 t Gsdpfx Ahjvzxpnomebn Hod 4 - 100 mm Število hodov 130 /min Izpetje 230 mm Vgradna višina 475 mm Površina mize 650 x 460 mm Prebojna odprtina v mizi 205 x 165 mm Višina mize nad tlemi 710 - 950 mm Nastavljiva miza 240 mm Površina bata 435 x 240 mm Nastavitev bata 85 mm Pogonska moč 5,0 kW Teža 2,6 t Potrebni prostor 1,2 x 1,7 x 2,3 m z motorjem, hidravlično sklopko/zavorno kombinacijo, mehanskim preobremenitvenim varovalom v batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, motoriziranim centralnim mazanjem, nastavljivo mizo, dvoročno in nožno upravljanje.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Gbsdpouiy Ngsfx Ahmen Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length Gedouiy Hrspfx Ahmebn - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: dober (rabljeno), številka stroja/vozila: 2029, Tiskarski stroj Boston Tiegel A4+ Hohner Tiegel, električni/z motorjem, strojna številka 2029, v dobrem stanju, takoj na voljo. Na voljo sta 2 stroja. V primeru interesa vas z veseljem obvestimo tudi o drugih strojih v naši ponudbi. Lepo vabljeni, da si stroj po predhodnem dogovoru ogledate pri nas. Gbedpsxc Eucofx Ahmon

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale: 1 used CNC aluminum circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Year: 2015 Gbsdpfx Asuyyhaohmon TECHNICAL DATA • Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2,020 x 1,510 x 975 mm • Weight: 650 kg The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be inspected at our warehouse in 09599 Freiberg.

Stanje: dober (rabljeno), Leto izdelave: 2005, delovna širina: 1.000 mm, Deburring Machine Make: LISSMAC Model: SBM-B 1000 Year of manufacture: 2005 Technical Data Manufacturer: LISSMAC Model: SBM-B 1000 Year: 2005 Pass-through width: 1000 mm Sheet thickness: max. 20 mm Minimum sheet length: 150 mm Minimum sheet width: 100 mm Speed: 1400 rpm Brush motor power: 4 x 7.5 kW Dimensions: approx. L 2.20 x W 1.50 x H 1.50 m Weight: approx. 1.5 t Gbedovgb Hgopfx Ahmsn Equipment - Automatic material feed - Infinitely variable feed rate 0–10 m/min - Sheet thickness adjustment: handwheel with worm gear and scale, stepless - Brush depth adjustment: handwheel with worm gear and scale, stepless - Various accessories - Operating manual All information subject to change without notice. A demonstration is possible at any time in our showroom.

Stanje: rabljeno, Locking frame – Frame OHT Letter Press Heidelberg OHT A4-24 Frame OHT Platen - 8 frames for KS cylinder - 1 frame for KSB cylinder - 2 frames for S cylinder - 4 frames for SBG cylinder - 1 frame for Adast GP platen Online video inspection via Skype video possible. Gbsdpfxsrffmzj Ahmjn We would be delighted with your visit – more machines in stock. Available immediately – ready for inspection. Located in Emskirchen / Nuremberg – test runs possible.