Stiskalnica za furnir

WINTER SOLID 3013-120-3

Stanje: novo, Leto izdelave: 2023, OMC PL 105 LC 30/13 Water Heating Veneer Press Working area: 3000 x 1300 mm Opening width: 400 mm 6 cylinders with 85 mm diameter Total pressure: 105 t Iodjiypzlopfx Af Toal Maximum heating temperature: 85°C Logic control system Machine control and readings via touchscreen panel Parameter monitoring: temperature, pressing force, shelf opening time, loading area calculator, gluing process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Stanje: rabljeno, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm, Width: approx. 80 – 240 mm, Finger joint length: 400 – 1,500 mm, Finished length: 2.50 m – 13.50 m stepless. Consisting of the following components: - SMB vacuum destacking unit (longitudinal) with 2 lift tables and 2 package roller conveyors, year 2013, max. package dimensions 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system; singling and feeding onto roller conveyor for scanner, board turner, diverter for too wet/too dry, diverter for B-quality, marking station or automatic mode - Bidac end-grain scanner for detecting cupping, year 2013 - Brookhuis moisture measurement FMI 5, year 2019 - Microtec scanner Goldeneye 502, year 2012, with X-ray, 4 colour cameras, and new optimization software - Dimter Opticut 350-2, year 2003 with paddle ejector (retrofit 2009) and associated sorting belts, pneumatic ejector for 2 additional qualities - NKT packaging unit Iedpfx Afovvi Tyj Teal - NKT finger jointing system with rotary table Special Pack AH 1050, year 2005, consisting of: milling machine, tilt station, feed track length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, 2.50 – 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 manual stacking blades, infinitely adjustable stop electro/hydraulic, package width max. 1200 mm, package height max. 600 mm, hydraulic package pusher Location: at customer site

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Immediately available semi-automatic line for finger jointing wooden elements up to 6 meters in length. The line has undergone a complete overhaul. The finger jointing machine is equipped with a conveyor table and an additional rotary table. This configuration facilitates and speeds up operation, significantly increasing productivity. The line features a new automatic glue applicator nozzle and a new saw-chipper unit. The press is designed for fixed-length joints up to 6 meters. Technical specifications of the finger jointing machine: - Milling spindle: diameter 50 x 210 mm - Spindle speed: 5,500 rpm - Motor power: 15 kW Ijdpfx Afstyy Exj Toal - Tool dimensions: diameter 250 x 150 mm - Special chipper: diameter 300 x 8 mm - Motor: 6 kW / 3,000 rpm - Infinitely variable feed table - Working width / height / thickness: 600 x 30 x 150 mm Press: - Working length: 6m - Slat width up to 160 mm, slat thickness up to 80 mm, maximum single glue joint length 6,000 mm - Number of pneumatic cylinders: 4 (2 upper, 2 lower) - Operating pressure: 5–8 bar - Air consumption: 300 l/cycle - Saw blade diameter: 300 mm - Spindle diameter: 30 mm - Motor power: 1.5 kW - Pneumatic saw feed - Dimensions (L/W/H): 7,700 x 1,160 x 1,500 mm; Weight: 1,500 kg Installation, commissioning, and operator training are available at extra cost.

Stanje: novo, Leto izdelave: 2024, Effective delivery volume approx. 1050 l/min Maximum pressure: 10 bar Tank capacity: 270 l Air outlet: ½" Iedpfsfh Hahox Af Tsal Packaging unit: 1 Dimensions and weights Length approx.: 1200 mm Width/Depth approx.: 650 mm Height approx.: 1540 mm Weight approx.: 295 kg Electrical data Motor power input: 7.5 kW Connection voltage: 400 V Number of phases: 3 Ph Current type: AC Mains frequency: 50 Hz Noise emission Sound pressure level Lp: 62 dB(A) Sound pressure details: Measured at 1 m distance according to DIN 45635 T 13 Motor Type of motor: Electric Location: Ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, OTT JU 90 Veneer Press - used - ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm Heating plate power: 9,100 W per plate Number of cylinders: 4 units Isdpfx Afswmmras Tsal

Stanje: dober (rabljeno), Leto izdelave: 1991, Kaeser CS120 Vijačni kompresor Popolnoma avtomatska, interno povsem cevno in električno povezana kompaktna naprava, enostopenjsko komprimirana z vbrizgavanjem olja, zračno hlajena, zvočno izolirana. Iaodownn Tuepfx Af Tol Končni tlak: 8,50 bar Moč motorja: 75,00 kW Dobava: 11,34 m³/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: FSL-62H-FJ-420A, Furnimate polavtomatska linija za prstno spajanje, letnik 2019, v zelo dobrem delovnem stanju. Isdjuaf Rdepfx Af Tjal Model: FSL-62H-FJ-420A Sprejema dolžine od 300 do 1400 mm, višina do 180 mm. Enota za prstno spajanje z odrezno žago, utorno žago in profilirno enoto za operacijo prstnega spoja. Avtomatsko podajanje s transporterjem do enote za lepljenje in stiskanje; omogoča lepljenje lesa do 4500 mm dolžine in 1400 mm širine. Stiskalnica za lepljenje z avtomatskim izmetom lepljene plošče. Za slike prek WhatsApp navedite svojo mobilno številko. Možen prikaz delovanja v Sheffieldu, Yorkshire, Velika Britanija. Celotna dokumentacija na voljo. Fotografije ipd. na voljo preko WhatsApp-a in elektronske pošte. Cena EXW, razstavljeno in naloženo na prevoz kupca: £35.000,00 + DDV, če je potrebno, ali 42.000,00 EUR (sprejemamo tudi ponudbe).

Stanje: rabljeno, številka stroja/vozila: 007930, Maks. širina panela: 4500 mm Maks. dolžina panela: 2200 mm Isdewgkulepfx Af Teal Maks. izstop glavnega žaginega lista: 125 mm Število vpenjalnih čeljusti: 9 Sistem za nalaganje tankih plošč: da

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4300 x 1650 x 2520 mm Weight: 7900 kg Total power requirement: 108 kW Veneer press SOLID 3113-200-6 - 6 daylight levels - Pressing surface: 3000 x 1300 mm - Heavy-duty steel heating plates, 42 mm, with thermal oil heating - Total pressing force: 120 t (3.1 kg/cm²) - Opening height: 80 mm Ijdpfx Ajv A Hlyjf Toal - 8 hydraulic cylinders, diameter 100 mm - Hydraulic pump: 7.5 kW - Heating plate power: 108 kW - Safety pull cord - Dimensions: 4300 x 1650 x 2520 mm - Weight: 7900 kg

Stanje: novo, Table size 1,200 x 780 mm Motor power 7.5 kW Spindle diameter 30 mm Fimal TX 160 tilting spindle moulder ----- Partnership Edition Offer: - Fimal TX 160 (7.5 kW) - 10 HP motor - Forward and reverse run - Upper control panel with electronic digital display for spindle height and tilt ----- General Technical Manufacturer Description: The FIMAL TX160 sets new standards in modern woodworking. With a precise tilting spindle, innovative control technologies, and a robust construction, it offers maximum stability and flexibility for demanding milling operations. Thanks to the stepless tilting adjustment, precise digital control, and powerful motorization, the TX160 is ideal for joineries, furniture makers, and industrial manufacturing. - Milling fence incl. parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front fence jaw, electric travel tilting device for the entire fence, quick-release lever for fixing aluminum fence jaws and pressure device - Curved milling fence - Electromotive spindle height adjustment incl. digital display and decimal increment setting - Table insert adjustable to the diameter of the milling tool (instead of table insert rings) - Indicator lights for set milling speed Iodpfx Ajxyafqef Teal - Electrical system and safety equipment according to CE standards - Table dimensions: 1,200 x 780 mm - Milling spindle d= 30 mm, H= 140 mm - Milling speeds: 1500/3000/4500/6000/8000/10000 rpm - Max. tool size under table: d= 320 mm, H= 50 mm - Motor: 5.5 kW / 7.5 HP / 50 Hz - Noise level according to EN 27960: 83.9 – 87.3 dB(A) - Spindle tilt: -45° to +45° - Electromotive spindle tilt adjustment incl. electronic display and decimal increment setting - Max. spindle height at 30 or 35 mm diameter: 140 mm - Max. spindle height at 40 or 50 mm diameter: 180 mm - Total spindle stroke: 220 mm - Table opening: 340 mm ----- Price for the above-mentioned machine on request! ----- (Technical specifications according to manufacturer – subject to change!) All prices net. Plus statutory VAT. Photos show the same model. Original images not yet available.