Nanos lepila na prstne spoje

DIMTER Leimauftrag

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B Bjdpfx Aew Sy T Hjfnswi POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: Bwedpfswclkysx Afnei - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: rabljeno, Leto izdelave: 2002, obratovalne ure: 37.000 h, številka stroja/vozila: 1651, doseg roke: 15.200 mm, nosilnost: 1.900 kg, širina gosenic: 3.000 mm, Oprema: kabina, žerjav, Year of manufacture: 2002 Machine number: 1651 Track width, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.0 m Grab: included Crane position: behind the cab Cab side: center !! Sale on behalf of customer !! Bsdpsv Hwk Uofx Afnowi

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10 Bedpecggy Ssfx Afnewi

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty Bwedpfovwfqqjx Afnji

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 Bwjdpfxodt Rgvo Afnsi VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Bwsdpfowmm Alex Afnsi Leto izdelave: 1998 Lokacija: Francija, Savoja

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen,

Stanje: skoraj kot novo (rabljeno), Min. input length: 500 mm, max. 6 m. Cross-section: max. 140 x 250 mm Motor: 5.5 kW Saw stroke: servo swing arm Feed via rollers, 6 top, 6 bottom CNC control Maxi 8.0 1 x sorting unit, each 11.5 m Bwodper A Et Tofx Afnei Machine will be configured according to your requirements.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 216 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20MS090000/007, skupna dolžina: 3.000 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 2.500 mm, skupna višina: 1.900 mm, skupna masa: 1.450 kg, lastna masa: 1.450 kg, delovna širina: 900 mm, priključek za stisnjen zrak: 6 letvica, hitrost prepustnosti: 50 mm/s, Glue Application and Longitudinal Splicing Machine For veneer thicknesses from 0.4 to 3 mm with direct gluing. With edge pre-gluing up to 5 mm. Machine has seen very little use, Sold ex works. Separate electric motors for chain drive and glue application Glue is applied to the edge of the newly fed veneer strip, increasing the bond strength. Rugged, durable stainless steel conveyor chain with articulated joints Independent temperature, speed, and pressure adjustment Bedow E Rfbspfx Afnowi Glue reservoir is quick and easily accessible for fast and simple refilling or cleaning Multiple heating zones allow for individual temperature settings Integrated cooling unit extends glue reservoir service life Continuously adjustable feed speed INCLUDES GLUE COOLER Technical Specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer thickness: 0.4 – 3.0 mm (up to 5 mm) Max. veneer moisture: 8 – 12% Working height: 900 mm Feed speed: 5 – 50 m/min Heated section length: 1000 mm Max. heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg