Avtomatski stroj za vrezovanje

WEINIG Univar 10/3

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 9.413 h, številka stroja/vozila: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA Podpfx Agev Nhyfjpjrd - 6 cylinders - Machine weight: 17.5 t - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Predstq U A Ijpfx Agpod

Stanje: rabljeno, Leto izdelave: 2004, Purpose of use: Construction Serial number: 04085xxxx Please contact ATS Norway for further information. Podpovg Nt Ijfx Agpord Please reference the following number when inquiring: 15082 Specifications: Model year: 2004 Hours: Approx. 10,000 hours (hour meter is stuck) Chassis: see photos Track width: approx. 40 cm Equipped with winch Includes Dynaset generator Maintenance: Performed by both the owner and in a workshop Available for immediate delivery Dimensions: Length: 6.00 meters Height: 2.70 meters Width: 2.32 meters Weight: 12.6 tonnes Description: The operating hour meter is stuck, but the owner estimates that the machine has around 10,000 hours. The engine was replaced 2 years ago and has only run 500 hours since then. Drills holes with a diameter of 193 mm. The included accessories comprise a drill bit and 120 meters of rods for immediate use. The machine is powered by a 4-cylinder Deutz engine, which has only 500 operating hours since the engine replacement. It is ready for dispatch and operational. Please contact us for more information or to arrange a viewing! Operating hours: 10,000 Net weight: 12,600 Model: 55S

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Lisec IG line for double and triple glazing units up to 2500 x 1600 mm, year of manufacture 1993 - 1999, consisting of: RTV-38/16WE, washing machine infeed conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for Low-E glass, 2 hot water tanks, 2 sand filters and blower, 1993 RTVB-16/16ST, washing machine outfeed conveyor, 1997 Sofsolution line scanner RTVB-11/16 ST, infeed conveyor with frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, argon gas filling press, 1997 RTVB-22/16ST, press outfeed conveyor 1, 1997 RTVB-22/16ST, press outfeed conveyor 2, 1997 RTVB-27/16ST, press outfeed conveyor 3, 1997 RTVB-11/16, infeed conveyor for cork placement device, 1997 APK-3/16, automatic cork placement device, 1997 RTVB-11/16, outfeed conveyor for cork placement device, 1997 RTVB-11/16VE, infeed conveyor for closing unit, 1999 Predpfx Asr Iil Eogpod VL-1N/16, automatic sealing machine for double and triple glazed units, 1999 VLA-25, VL extension with corner correction rollers, 1999 DOS-1/PU, mixing and dosing station for PU, with nozzle removal device, 1999

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts Pedpfx Aoxfaf Uegpord TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Profiling and finish-milling machine UNIVAR 10, year 1997 Predpjiix Uvjfx Agpjd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar Podpfx Agemgc I Njpjrd - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: dober (rabljeno), Leto izdelave: 2009, Production line for windows Weinig Conturex C 114 Year of manufacture: 2009 Working width: 25–260 mm Working height: 25–110 mm Table length PowerGrip: 4 x 2280 mm Workpiece length: 200–6000 mm Prodpeuzu Tyefx Agped

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Psdpet R T Hcofx Agpsrd Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Pjdpfx Agjvwdmwepjrd