Oblikovalni stroj

Weinig Unimat 30 EL

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 108111, Funkcionalnost: popolnoma funkcionalen, delovna širina: 240 mm, višina skobljanja: 160 mm, delovna višina: 180 mm, Four-side planer after service inspection, machine weight 3,900 kg Duodpevrq U Defx Abtou

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers Dsdjwvqklopfx Abteuu • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: dober (rabljeno), Radio-controlled quick coupling carriage, fully hydraulic, with hydraulic auxiliary carriage. Track gauge: 840 mm. Control panel and electrical switch cabinet. Dodpod Nqrqefx Abtouu

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Debelinski skobeljni stroj model MARTIN T 44 rabljeni stroj Duodpfx Abjyml E Djteu CE-označevanje: Da delovno stanje: Odlično tehnični podatki: uporabna delovna širina mm: 630 maksimalna delovna višina mm: 250 maksimalni odvzem mm: 8 2 podajalni hitrosti m/min: 6 / 12 motorizirano pozicioniranje mize z digitalnim prikazom 4 rezila „Tersa“ glavna moč motorja KM: 7,5 teža kg: 1115 napetost: 380/50

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 926 h, skupna višina: 1.800 mm, skupna dolžina: 11.250 mm, skupna širina: 900 mm, Barva: Siva Teža: 1.500 kg Cena: Na zahtevo Dusdpfx Absyna Ezotsu - Leto izdelave: 2012 - Dokumentacija na voljo: Ne - CE označba prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 546324 - Delovne ure: 926 - Glavna moč motorja [kW]: 7,5 - Največja dolžina žaginega lista [mm]: 7.209 - Največja širina žaginega lista [mm]: 300 - Največji premer žaginega lista [mm]: 500 - Premer žaginega lista na osi [mm]: 85 - Dolžina podajalne mize [mm]: 7.850 - Dolžina izhodne mize [mm]: 2.400 - Opcije: Avtomatski podajalni sistem - Napetost [V]: 400 - Poraba toka [A]: 22 - Varovalka [A]: 25 - Moč [kW]: 11,0 - Transportne mere: 11.250 mm x 900 mm x 1.800 mm (d x š x v) - Transportna teža [kg]: 1.500 kg Finančne informacije DDV: Navedena cena je brez DDV DDV / obdavčenje na razliko: DDV je odbiten za podjetja Dostava in odkup sta vedno možna za vse iz industrijskega področja Yorick Diebels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, številka stroja/vozila: 0-200-87-0913, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja debelina roba: 3 mm, vrsta nastavitve višine: električni, skupna dolžina: 10.825 mm, Oprema: dokumentacija / priročnik, Used single-sided HOMAG edge banding machine, for straight edges; for joint trimming, edge banding, and post-processing of various edging materials. Fixed stop side on the left. Year of manufacture: 2023, first commissioning: Nov. 2023 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Max. workpiece thickness: 60 mm - Motor-driven height-adjustable top pressure - Workpiece support with roller tracks - Glue pot lift-off at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual control for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with synchronized/opposing rotation, 2 x 3 kW, operation-controlled Horizontal positioning via NC motor (CAN) EDGING UNIT V20, comprising: - QA60 glue application unit, with PTFE (Teflon) coating - Premelter for PUR adhesive - Processes both EVA and PUR adhesives - Edging magazine, min. 0.4 mm to max. 3 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors each 0.8 kW (front/trailing edge) Chamfer/straight cut, as well as trim-cutting excess edging - Pre-/flush trimming unit 1.15 kW, top/bottom - Fine trimming unit top/bottom, with NC adjustments - Profile trimming unit MF60 (corner rounding), 2 motors (top/bottom) Servo-controlled with softtouch - Universal milling unit, controlled - Profile scraping blade top/bottom, with interchangeable heads Dedpfoy D A Swjx Abtjuu - Flat scraping blade FA10, top/bottom (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL SYSTEM: - PC 23 powerTouch - woodCommander 5 - Gap set-up function - Edge tracking control

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, PRIBO PATERNOSTER ZLAGALNIK PONUDBA VKLJUČUJE 1. PROBO ODLAGALNI TRANSPORTER Z DESNOKOTNIM PRENOSNIM TRANSPORTERJEM. 2. PRIBO Q1020 PATERNOSTER ZLAGALNIK. 3. 2x AVTOMATSKA MAGAZINA ZA LETVICE 1200MM. NAJMANJŠA DOLŽINA PRIBLIŽNO 1900MM. NAJVEČJA DOLŽINA 4500MM. ŠIRINA PAKETA 1200MM VIŠINA PAKETA 1200MM MAKS. KAPACITETA 5 PLASTI NA MINUTO PRIMERNO ZA ZLAGANJE PO OBRATNI STRUGARCI, OBREZOVALKAH, PASOVNI ŽAGI, DET ITD. Dujdpfx Aey Hb Upobtou

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Number of spindles: 4 pcs Working width: 230 mm Planing height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min Control: Memory Plus Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of wood, including infeed mechanisation Weinig High Mech E 1 and outfeed mechanisation with Sicko paternoster stacker. The machine is equipped with a Memory Plus system with electronic (radial) positioning of spindles 3 & 4 and MarathonPowerCoating PLUS on the table plates. Last service by manufacturer: December 2025. The plant is still in operation and can be inspected at any time. Expected availability: from September 2026. Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm Dodpfxjyhfhns Abtsuu Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm

Stanje: rabljeno, Leto izdelave: 1997, največja višina reza: 300 mm, največja širina rezanja: 450 mm, premer žaginega lista: 800 mm, delovna širina: 450 mm, Ponujamo to rabljeno Hundegger K1-A, letnik 1997. Dodpfoynwx Eex Abtjuu Tip: K1-A Serijska številka: 1647 Letnik izdelave: 1997 Naslednja oprema: - Prečni dovajalni transporter s ploščatimi verigami - Nihajna podmiza žaga, premer lista 800 mm - 4-osno univerzalno rezkanje s prstnim rezkarjem in lastovičjim repom Kombinirana podpora za vertikalno delujoče orodje: - Vrtalna naprava - Vertikalni prstni rezkar Kombinirana podpora za horizontalno delujoče orodje: - Vrtalna naprava - Vrtalna naprava - Garnitura za utore - Zadnji označevalec - Avtomatski preklopnik - Različne rezkalne glave Dimenzije obdelovancev od 20x60 mm do 300x450 mm. Za vprašanja nas kontaktirajte!

Stanje: zelo dobro (rabljeno), Štiristranska skobeljna Weinig Hydromat 23C Delovna širina: 230 mm Delovna višina: 160 mm Število vreten: 7 Razporeditev vreten: Dujdpjxlcufofx Abteu 1. Spodaj 15 kW 2. Desno 7,5 kW 3. Levo 7,5 kW 4. Zgoraj 15 kW 5. Spodaj 30 kW (večlistna žaga) 6. Spodaj 7,5 kW (hidro podpora) 7. Zgoraj 7,5 kW (hidro podpora) Hitrost vrtenja vreten: 6000 o./min Premer vretena: 50 mm 4 pogonski valji v delovni mizi Hitrost pomika nastavljiva s frekvenčnikom do 36 m/min Pomik poganja kardanska gred Pnevmatski pritisni elementi Tehnična dokumentacija