Štiristranski skobeljnik Weinig Unimat 23

WEINIG unimat 23e

Stanje: rabljeno, Leto izdelave: 1995, širina obdelovanca (maks.): 230 mm, vhodna napetost: 400 V, dolžina mize: 1.500 mm, število vreten: 8, Oprema: kabina, Weinig Unimat 23e rezkalni stroj (8 vreten) Opis: Leto izdelave: 1995 Dimenzije podajalne mize: 1500 mm Blodpfxeyx Tiie Aa Rei Število osi: 8 Zaporedje vreten: Spodaj-desno-levo-desno-zgoraj-spodaj-zgoraj-spodaj Premično vreteno: Ne Širina skobljanja: 20 / 230 mm Višina skobljanja: 12 / 120 mm Pretok: 6-24 m/min Utornata delovna miza: Ne (Vse spremembe, napake v tehničnih podatkih, informacije in cene pridržane. Razpoložljivost odvisna od predhodne prodaje. Brez garancije za tiskane podatke!) Najboljši stroji za obdelavo lesa iz Nizozemske.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Blodjrpi E Aspfx Aa Rei

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 255 mm, višina skobljanja: 160 mm, premer vretena: 40 mm, širina skobljanja: 255 mm, delovna višina: 160 mm, moč pogonskega motorja podajalnika: 3.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, premer gredi skobeljnika: 40 mm, vrsta vhodnega toka: trifazni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) Bsdpfexg Sa Hox Aa Rjli One powered outfeed roller integrated in the table.

Stanje: pripravljen za uporabo (rabljen), Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E ----- 6 spindles (including 2 x right), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 – 230 mm Working height: 8 – 120 mm 1st spindle (bottom), 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 125 – 180 mm Rabbetting device incl. tool Hardened table insert in front of 1st bottom spindle 2nd spindle (right), 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle (left) ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. side pressure roller, spring-loaded 4th spindle (right), 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle (top), 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circles: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool circle and can be swung away from tool, spring-loaded 6th spindle (bottom), 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles – general ----- All moulding spindles with high concentric accuracy Lubrication points for axial spindle movement Feed system ----- Bljdoxz Hh Ujpfx Aa Roi Motor with mechanical brake, 4 kW Mechanical feed infinitely adjustable from 5–24 m/min Infeed roller in front of 1st lower tool, pneumatically controlled up/down Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustable feed roller travel relative to left spindle, axial 35 mm Electrical system ----- Operating voltage: 440 V (voltage range 380–420 volts), 50 Hz Machine base, tables, and fences ----- Jointing table 2.0 m long (incl. jointer guide) Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindle Nos. 3 and 5 Min. working height: 12 mm Electric height adjustment of top spindles and feed Central position of lubrication points on front of machine Electronic digital displays on spindle 3 and 5 (axial), spindle 6 (radial), spindle 4 (axial and radial) Safety and noise protection ----- Full safety enclosure Easy high...

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment Bsdpfx Aaohlp D No Rsli - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 86573, višina skobljanja: 120 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, vrtljajska hitrost (min.): 6.000 obr/min, število vreten: 6, Vretena: 6 Bjdpfx Aaoy Rrgko Rsli Delovna širina: 230 mm Delovna višina: 160 mm Vreteno 1: Spodaj (4,0 kW) Vreteno 2: Zgoraj (4,0 kW) Vreteno 3: Desno (7,5 kW) Vreteno 4: Levo (7,5 kW) Vreteno 5: Zgoraj kW Vreteno 6: Spodaj kW

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, – nemška proizvodnja – leto izdelave 2001 – skupna moč 42 kW – vlečni valji v mizi Blsdpfx Aajw H Smhj Roi TEHNIČNI PARAMETRI: – širina skobljanja: 230 mm – višina skobljanja: 170 mm – električna nastavitev višine – premer vretena: 40 mm – 1. spodnje vreteno: 7,5 kW – 2. levo vreteno: 11 kW – 3. desno vreteno – 4. zgornje vreteno: 11 kW – 5. spodnje vreteno: 5,5 kW – kontinuirano nastavljiv pomik: 6–38 m/min – moč motorja pomika: 4 kW – dolžina vstopne mize: 1000 mm – električne zavore – 5 zgornjih jeklenih vlečnih valjev – en zgornji gumijasti vlečni valj – 2 vlečna valja v mizi: eden zobati – zračni blazinasti element v mizi – pnevmatski pritisk – pomik na kardanskih gredah – premer odsesovalnih priključkov: 5 x 140 mm – centralno mazanje mize – dimenzije stroja (d/š/v): 390 / 210 / 230 cm – teža cca 4000 kg

Stanje: dober (rabljeno), potovalna razdalja osi X: 745 mm, pomik osi Y: 370 mm, pomik po osi Z: 300 mm, Bridgeport milling machine Model: Interact 4 Control: Heidenhain TNC 155 X travel: 745 mm Bedjqgcdtjpfx Aa Roli Y travel: 370 mm Z travel: 300 mm Table: 960 x 380 mm Spindle: ISO 40 Dimensions: 185 x 180 x 235 cm (LxWxH)

Stanje: rabljeno, Tehnični podatki: Maksimalna širina skobljanja: 240 mm Maksimalna višina skobljanja: 130 mm Premer vretena: 40 mm Število vreten: 6 Zaporedje vreten: spodaj 5,5 kW desno/levo 7,5 kW gore 5,5 kW gore 5,5 kW spodaj 5,5 kW univerzalno 5,5 kW 1/4/5/6 vreten ima svoj motor 2/3 na enem motorju Rebraste mize Rebrasti valji v mizi: 2 Zgornji jekleni vlečni valji: 5 Zgornji gumijasti vlečni valji: 3 Premer odsesovalnega nastavka: 6 x 140 mm Stopenjska nastavitev podajanja Podajanje preko kardanske gredi Mazalna črpalka za delovno mizo 2 gladka valja v mizi Tlak: 6 atm. Blsdpfxjycu R Ie Aa Rsi Električni dvig korpusa Napajanje: 400 V Skupna moč: 32 kW Skupne mere: Dolžina: 4600 mm Širina: 2000 mm Višina: 1800 mm

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Bledpfxeu Damds Aa Rei

Leto izdelave: 2025, stanje: novo, Standard configuration with column Bljdpfx Aajgn Tzlj Rei Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information