Štiristranski skobelni stroj Weinig Unimat 17A

WEINIG Unimat 17A

Stanje: dober (rabljeno), Leto izdelave: 1981, Za povpraševanje: Zoltán Utasi Gsdoy Nmv Dspfx Ahmsbn Plus 36 30 205 7380 Konfiguracija vretena: Spodaj Desno Levo Zgoraj Spodaj Hitrost vretena: 6000 vrt/min Delovna širina: 170 mm Delovna višina: 120 mm Dolžina spajalne mize: 2 m Opremljeno s črpalko Waxilit Brezstopenjsko nastavljiva hitrost podajanja: 7–18 m/min Stranski pritisni valj Motorizirana nastavitev pritisne letve Opremljeno s 5 rezalnimi glavami (3 kosa L180 mm, 2 kosa L130 mm) Dokumentacija stroja na voljo

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Gedpfx Ahswvqkljmjbn Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, VIERSEITIGE Hobel- und Profiliermaschine WEINIG UNIMAT 17 A mit 5 Spindeln Technische Daten: Arbeitsbreite: max. 180 mm Arbeitshöhe: 120 mm Spindeldrehzahl: 6.000 U/min Spindeldurchmesser: 40 mm Kleinster Werkzeugdurchmesser: 100 mm Max. Werkzeugdurchmesser: 160 mm Max. Durchmesser der vertikalen Spindeln: 180 mm Max. Werkzeugdurchmesser 2. rechte Spindel: 195 mm Max. Werkzeugdurchmesser obere Spindel: 200 mm Max. Werkzeugdurchmesser untere Spindel: 180 mm Vorschubgeschwindigkeit stufenlos: 7 – 18 m/min Durchlauf mit Federdruck Kettenantrieb (nicht kardanisch) Spindelanordnung: 1. Spindel unten horizontal (Hobel) – 4 kW 2. Spindel rechts vertikal – 3 kW 3. Spindel links vertikal – 4 kW Gbsdpfx Ahjgqrunomsn 4. Spindel oben horizontal – 5,5 kW 5. Spindel unten horizontal – 4 kW 1 Satz Hobelwerkzeuge inklusive Spannung: 380 V / 50 Hz GEBRAUCHTE MASCHINE IN GUTEM ZUSTAND, VOR AUSLIEFERUNG IN UNSERER WERKSTATT GEPRÜFT

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option Gbjdpeu Agh Sjfx Ahmen To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: rabljeno, Število vreten: 6 kosov Delovna širina: 230 mm Višina oblanja: 120 mm Stroj za oblanje in profiliranje Weinig tip Unimat 500 za štiristransko oblanje in profiliranje lesa. Stroj ima spominski sistem z elektronskim pozicioniranjem (aksialno in radialno) vreten 2-5. Z ojačanim ležiščem, kompaktno kabino ter v zelo dobrem originalnem stanju. Vključuje: - Brusilni stroj za rezila kot Rondamat 931 - Centrolock glave za oblanje - Glave za profilne nože - Rezervna rezila - Obsežna dodatna oprema. Vreteno 1: Spodaj / 40 mm Vreteno 2: Desno / 7,5 kW / 40 mm Vreteno 3: Levo / skupni motor z desnim / 40 mm Vreteno 4: Zgoraj / 7,5 kW / 40 mm Vreteno 5: Spodaj / 40 mm Gbsdpfxsya Hh To Ahmsn Krmiljenje: Spominski sistem

Stanje: rabljeno, številka stroja/vozila: 209, Spindelpresse Tränklein SP, Serien-Nr. 209 Pressfläche max. 300 x 400 mm Online-Videoinspektion über Skype möglich Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Gedpfxjupy Tge Ahmebn Lagerort: Emskirchen / Nürnberg – Test vor Ort möglich

Leto izdelave: 1990, stanje: delavnici obnovljeno (rabljeno), Weinig 4-sided planer with 7 heads, 7 universal, configuration: horizontal lower, vertical right, vertical left, vertical right, upper horizontal, lower horizontal, and the last universal. Drive is transmitted via cardan shafts. Drive secured with Rotax safety clutches. Workpiece is clamped pneumatically. Feed speed steplessly adjustable by inverter. Machine feed rate: 0-42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally, new wiring and new electrics installed. Machine after a complete overhaul. Warranty included. Gbjdpopqxnxjfx Ahmjn

Stanje: rabljeno, Leto izdelave: 1980, No. 3192 Four-Side Planer WEINIG U 17 A Used, year of manufacture 1980, machine available from February 2025 Machine still in operation 6 spindles Spindle arrangement: bottom – right – left – top – bottom – bottom Working width: 170 mm (with a tooling circle of 125 mm) Working height: 120 mm (with a tooling circle of 125 mm) Jointing spindle: 4 HP All other spindles: 5.5 HP Feed: 2 or 3 HP Spindle speed: 6000 rpm Working spindle diameter: 40 mm Smallest tooling circle diameter of profiling spindles: 100 mm Largest tooling circle diameter of profiling spindles: 180 mm Feed continuously variable: 6 – 18 m/min Feed roller diameter (hardened): 140 mm Feed roller width: 50 mm Adjustment range of infeed table and jointing fence (right): 10 mm Adjustment range of vertical spindles below table: 40 mm Adjustment range of horizontal spindles (axial): 30 mm Straightening table length: 2 m Sale on behalf of customer, ex location Upper Austria, without dismantling, transport, or installation Gjdpfx Ahsvkhccsmobn Errors in description and price excepted Dismantling, transport, and loading by us possible as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machinery; sale is "as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: nepreverjeno, delovna širina: 220 mm, višina skobljanja: 120 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 120 mm, skupna masa: 7.500 kg, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 10, moč: 105 kW (142,76 KM), vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Hydromat 22 B With grooved bed 10 spindles Working width: 220 mm Working height: 120 mm Spindle diameter: 50 mm Feed: 7.5 kW / 8–40 m/min Spindle arrangement: 1–Bottom (7.5 kW) – with hydro clamping 2–Right (7.5 kW) 3–Left (11 kW) 4–Right (7.5 kW) – with straight jointer 5–Left (7.5 kW) 6–Top (15 kW) – with hydro clamping 7–Bottom (7.5 kW) – with hydro clamping 8–Top (7.5 kW) – with hydro clamping and straight jointer 9–Bottom (7.5 kW) – with hydro clamping and straight jointer 10–Universal (7.5 kW) Godpfx Aheu Udd Sjmebn 6 powered rollers in the table

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), A four-sided planer Weinig including automation, double crosscut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Automation unit Kellfass consisting of double crosscut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. An on-site inspection is possible. Gjdpfx Aev T Apcshmjbn