Stroj za optimizacijo po dolžini

WEINIG OPTICUT150

Stanje: rabljeno, Leto izdelave: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood with automatic identification and removal of wood defects. Fodpfx Ajwtgcxofleft Technical specifications: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fusing: 25 A Condition: used

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 450 mm, največja višina reza: 100 mm, največja širina rezanja: 245 mm, delovna višina: 100 mm, vrsta vhodnega toka: trifazni, – Year of manufacture: 2001 – Optimization – Defect cutting (cut-to-length) – The machine is equipped with additional tables, enabling a maximum cutting length of up to 6500 mm (currently set to 3400 mm) – 8 cutting lists TECHNICAL PARAMETERS: – Max. cutting length: 6500 mm (currently 3400 mm) – Min. element length: 300 mm – Max. cutting height: 100 mm – Max. cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Max. feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material hold-down – Five ejectors – Intelligently controlled waste chute – Vario speed system – Total length: 17,500 mm Fodpswtzrhefx Aflsft – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, največja širina rezanja: 450 mm, dolžina rezanja (maks.): 6.200 mm, moč: 15 kW (20,39 KM), premer žaginega lista: 550 mm, skupna dolžina: 8.100 mm, skupna masa: 2.700 kg, širina mize: 450 mm, vrsta nastavitve višine: mehanski, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer odprtine diska: 80 mm, premer ekstrakcijske šobe: 160 mm, delovna višina: 850 mm, priključek za stisnjen zrak: 6 letvica, trajanje garancije: 12 meseci, The FLS ECO 120 edging saw is the entry-level model in the FLS technology range. This saw is primarily designed for small to medium-sized operations focused on various wood processing tasks, but it is also suitable for non-wood materials. The single-blade FLS ECO 120 significantly increases work efficiency and material yield (by 10-15%) and can process cants, planks, beams, and large panel materials. The incoming material can be edged, resawn, trimmed, and used for producing cut-to-size pieces and lamellas. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by a single worker. The machine meets strict occupational safety requirements in accordance with relevant EU regulations and directives. Fsdeubbubopfx Afloft Smooth feed and saw blade lift adjustment ensure clean cuts and high cutting performance. Blade changes are quick and, most importantly, safe thanks to the "ProLock" quick-release system. The saw carriage features guiding and lateral rollers that guarantee optimal tracking of the floating unit during cutting, minimizing unnecessary vibrations. The upper hold-down and adjustable wooden fence securely fix the material during cutting, eliminating unwanted movement. FLS technology offers unique fast and simple setup via ergonomically positioned controls with a touchscreen panel. Cutting width values can be entered manually or through the "Absolut" basic program, as well as via optional "Chain" or "Optim" programs. The intended cutting line is projected onto the material with a laser and subsequently guided longitudinally by the moving saw blade. On the FLS saw, you can cut cants, beams, planks, and large panel materials. Input material can be edged, resawn, trimmed, cut at an angle or mitre, grooved, and processed into cut-to-size pieces and lamellas. The machine is ideal for manufacturers of panel boards, solid furniture, or staircases. The unit can also be used to process non-wood materials such as PUR/PIR panels, plastic-based materials, sandwich panels, aluminum, or cement-bonded particle boards.

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), longitudinal saw for cutting boards, 4 meters main motor 400V, 7.5 kW - saw blade feed motor 400V, 2.2 kW Ffsdpfjhbp T Ssx Afljt - pneumatic saw extension - working pressure 6 bar - cutting length 4020 mm - cutting height approx. 170 mm - machine length 5.5 m - machine width 1.6 m²

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Optimizer Salvador SuperCut 500 Year of manufacture: 2017 Technical condition: very good Technical specifications: - Maximum installed power: 11.5 kW Fodpfxeuyfx Ro Afljft - Saw motor power: 5.5 kW - Maximum material cross-section: 300x60 mm - Minimum element cross-section: 35x15 mm - Minimum element length: 1000 mm - Cutting time: 0.1 – 1 s - Feed speed: 0 – 150 m/min - Number of ejectors: 10 Installation and operator training available at extra cost.

Stanje: novo, Leto izdelave: 2026, Sink processing machine for materials such as sintered quartz, granite, granite composites, ceramic models, etc. Technical data: 1325 PRO+ MILLING PLOTTER, WORKING AREA 1300X2500MM Z AXIS TRAVEL 700MM - PRO VERSION OMRON HIGH SPEED AC SERVO DRIVES (COMPLETE WITH PLANETARY GEARS) 1.5KW ETHERCAT INTELLIGENT ENERGY RECOVERY OSAI OPENSMART INDUSTRIAL REAL-TIME CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT FOR UP TO 16 AXES, ETHERCAT COMMUNICATION WITH CONTROL CABINET AUTOMATIC GANTRY ANGLE CALIBRATION EUCHNER HBA-103037 MANUAL CONTROL UNIT CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) Fjdpfx Ajualqqjfleft AUTOMATIC CENTRAL GREASING WITH SKF GREASE BEAM SYSTEM WITH PNEUMATIC CLAMPS SINK MOUNTING SYSTEM DUST EXTRACTION CHANNELS BALLSCREW PROTECTION ON Z AXIS AIR BLOW SYSTEM FOR TRAVELING ELEMENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET #plotter #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching from saw cutting to zero-clearance wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd elevating spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and slotting spindle on the right side, 3 kW motor Fitting spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position counter changer Fedpfx Afjxmr N Ielsft Electronic length stop 3600 mm Return of workpiece via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric worktables (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 6.650 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 20 m/min, nazivna (navidezna) moč: 25 kVA, proizvajalec krmilnikov: Bosh Rexroth, višina obdelovanca (maks.): 290 mm, teža obdelovanca (maks.): 500 kg, širina mize: 1.300 mm, dolžina mize: 4.000 mm, vrtljajska hitrost (min.): 1.200 obr/min, največja hitrost vrtenja: 24.000 obr/min, skupna masa: 5.500 kg, hitrost vretena (min.): 1.200 obr/min, moč vretenovega motorja: 10.000 W, nos vretena: HSK63F, število vreten: 1, število mest v zalogovniku orodij: 15, dolžina orodja: 240 mm, teža orodja: 6.000 g, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, ArtisX6 SHORT DESCRIPTION. 1 working electrospindle with 10 kW power; constant power in the range of 12,000 to 24,000 rpm; operating range: 12,000–24,000 rpm. Tool holder: HSK63F. Axis travel ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis = 360° Fsdpfx Aswh Aidofljft Axis rapid traverse speeds: X/Y plane = 85 m/min; Z = 20 m/min Clearance under gantry: 290 mm 1 automatic disc-type tool changer, 15 positions. Max. tool length: 240 mm, max. tool mass: 6 kg Drilling unit in L configuration, 2.2 kW power, spindle speed 4,500 rpm, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm. 2 x 4 pneumatically retractable positioning pins (Ø25 mm, stroke 115 mm). Tool set included (some never used) Table divided into two stations for alternate work 1 vacuum pump with 250 m³/h capacity and a 500 l compensation tank Machine safety (EU standard): BUMPER bumper system (no mats, light barriers, etc.) Control: Bosch Rexroth PNC, industrial PC BTV 16, Pentium III processor, 256 MB RAM, 10 GB HDD, network card Drive control via Profibus SERCOS system Data input: USB stick, local network Operating system: Windows 2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Mobile control panel with manual control panel Remote diagnostics Interpolation: 5-axis linear, 2 ½ D circular Connected load: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% operational. Storage location: Northern Poland.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.320 mm, pomik osi Y: 1.785 mm, pomik po osi Z: 280 mm, hitrost pomika os X: 8 m/min, hitrost podajanja osi Y: 6 m/min, hitrost podajanja os Z: 3 m/min, skupna masa: 5.500 kg, moč vretenovega motorja: 8.000 W, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, The machine was in operation in Sweden until recently and is currently undergoing a service inspection. It is equipped with two milling units. Ffodpfxsuzmyrj Aflot