Krožna žaga

Störi Mantel FLS ECO

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for Bdjdpet Hw Iijfx Agtsb roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: Bdsdpfx Agodt Rgvotjb VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Oprema in tehnični podatki: - Dolžina vpenjanja vretena: 180 mm - Nagib vretena: -10° do +45° - Motoriziran dvig vretena z natančnim nastavljanjem - Motoriziran nagib vretena - Motor: 5,5 kW - Velikost mize: 1200 x 730 mm - Največja odprtina mize: 420 mm - Motorna zavora - Hitrosti: 3000/4500/6000/7000/10000 obr/min - Prikaz hitrosti Bdsdpfexwz Rcex Agtsb - Priključek za odsesavanje: 125 mm - Z integralnim Aignerjevimi prislonom - S 3-valjnim podajalnikom Razpoložljivost: takoj Lokacija: Röllbach

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Bdodpfx Ageu Nlkxetsb

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Bedpfotwba Ssx Agtodb Loading side: 1400 mm PVC roll unwinder Double loading table

Stanje: rabljeno, Leto izdelave: 1995, Spindle tiltable: Yes, -5 to 45° Bdedjuzkwzepfx Agtjb Height adjustment: Handwheel Tilt adjustment: Handwheel Fence adjustment: Manual Height display: Mechanical counter Tilt angle display: Mechanical counter Fence position display: Mechanical counter Spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5.5 kW Motor brake: Yes, automatic Extraction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm Weight: 900kg

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/fixed: 90mm/120mm, weight: approx. 3000kg. An on-site inspection is possible. Bodpowv Umwefx Agtedb

Stanje: rabljeno, Leto izdelave: 1999, Carriage Length: 3800 mm Cutting Width at Rip Fence: 1500 mm Cutting Width at Crosscut Fence: 3200 mm Bdodpfxsvxi Dds Agtob Cutting Depth: 140 mm Scoring Unit: No Saw Blade Height Adjustment: Electric Saw Blade Tilt Adjustment: Electric Rip Fence Adjustment: Electric / Position Control Saw Blade Angle Display: Digital Cutting Height Display: - Rip Fence Display: Digital Crosscut Fence Display: Scale Saw Blade Diameter: 400 mm Speeds: 3 Motor Power: 7.5 kW Motor Brake: Yes, automatic Extraction Connection: 80 mm and 120 mm Machine Length: 3900 mm Machine Width: 2200 mm Weight: 1000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 750 mm, premer struženja: 330 mm, izvrtina vretena: 41 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 1 obr/min, moč vretenovega motorja: 11.000 W, premer tulec: 50 mm, poteza s peresom: 110 mm, premer struženja nad ležiščem sani: 435 mm, skupna masa: 1.400 kg, višina središča: 165 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale is a cycle-controlled WEILER E30X750 CNC lathe equipped with a Siemens 810 D control unit. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On-site or via video call by arrangement Images/Video: Additional images and videos of the running machine can be provided upon request. Power-on hours (machine powered): 26,492 h. The actual operating hours are significantly lower. Based on experience, the spindle run time (actual turning) is approximately 30% to 50% of this value (i.e., around 8,000 to 13,000 hours). Technical data: Working area: Centre height: 165 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Centre distance: 750 mm Spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Maximum spindle torque: 180 Nm Main drive: Drive capacity 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / rapid traverse Bjdpevphv Tsfx Agtjdb Feed drive: Three-phase AC feed drives Feed range (stepless): Longitudinal: 0.001–50 mm/rev (additionally indicated: 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (additionally indicated: 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Delovna širina: 230 mm, delovna višina: 160 mm, število vreten: 5, premer vretena: 50 mm, moč vretena: 4x 5,5kW/2x 11kW, pomik: 24 m/min, dolžina vhodne mize: 3000 mm, aksialni hod vertikalnega vretena: 80 mm, aksialni hod horizontalnega vretena: 45 mm. Priključna moč: 126 kW, potreba po zraku: 8400-9600 m³/h, dimenzije stroja (X/Y/Z): pribl. 3500mm/2000mm/1800mm, teža: pribl. 3500 kg. Vključno z vgradno enoto Weinig EM-11 in ustreznim razdelilnikom za odsesavanje. Dokumentacija na voljo. Možen je ogled na lokaciji. Bsdju Damdopfx Agtedb