Oblikovalnik

WEINIG HYDROMAT 3000

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Znamka: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Leto: 2016 Stanje: Odlično Uporaba: PET / PP / PS folija ali plošča PET: Območje debelin: 0,25 – 2,2 mm Izhodna zmogljivost: 2.000 kg/h Največja širina plošče: 1.600 mm Ekstruder: RZE 120 mm Električna napajana: 3 x 480V 60Hz z N Širina kalandrske valjev: 1.800 mm Cedpfsvbcbuex Agtjha Premeri kalandrske valjev: 450 / 700 / 700 mm Silikonska kopel, največja širina plošče: 1.600 mm Silikonska kopel, območje debelin plošče: 0,15 – 1,5 mm Vključen štiripozicijski navijalec WOB 1800 za navijanje dvojnega traku. Vse informacije so lahko predmet sprememb in/ali napak. Vsa oprema je na voljo do prodaje ali do umika iz prodaje.

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom Chodpfxjhuthyo Agtea constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Chjdpfofi Tg Hsx Agtsa Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Cjdpfju R Szasx Agtsha Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: dober (rabljeno), Radio-controlled quick coupling carriage, fully hydraulic, with hydraulic auxiliary carriage. Track gauge: 840 mm. Control panel and electrical switch cabinet. Cjdpfx Aged Nqrqetsha

Stanje: rabljeno, Leto izdelave: 2007, premer vretena: 45 mm, število vreten: 6, Št. 3176 Strugalni in žlebni avtomat WEINIG Hydromat 1000 Rabljen, letnik 2007, stroj že razstavljen 6 vreten: spodaj – desno – levo – zgoraj – zgoraj – spodaj Elektronski pomik 6–60 m/min Delovna širina 80–150 mm Delovna višina 23–65 mm Končna širina letev 4–15 mm Maks. število letev 16 kosov Dolžina letev 400–4000 mm 1. Vreteno horizontalno, spodaj Zavorni motor 11 kW, 6000 vrt/min Premer vretena 45 mm Krožni radij orodja 125–180 mm 2. Vreteno vertikalno, desno Zavorni motor 7,5 kW, 6000 vrt/min Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 80 mm 3. Vreteno vertikalno, levo 7,5 kW, 6000 vrt/min Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 80 mm Tlačna plošča pred vretenom, možnost odmaknitve, pnevmatični pritisk valja 4. Vreteno horizontalno, zgoraj 15 kW, 6000 vrt/min, premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 45 mm Razdeljena tlačna plošča pred zgornjim vretenom, nastavljiva in možnost odmaknitve, pnevmatična 5. Vreteno horizontalno, zgoraj, kot žagnopilno vreteno Zavorni motor 37 kW, 5000 vrt/min Premer 45 mm Hod nastavitve osno, zmanjšan na 25 mm Krožni radij orodja 112–250 mm Maks. globina žaganja 35 mm Hod nastavitve osno 45 mm Razdeljena tlačna plošča pred zgornjim vretenom, nastavljiva in možnost odmaknitve, pnevmatična 6. Vreteno horizontalno, spodaj, kot žagnopilno vreteno Zavorni motor 30 kW, 5000 vrt/min Hod nastavitve osno, zmanjšan na 25 mm Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žaganja 35 mm Hod nastavitve osno 45 mm Vsa žlebna vretena z visokokakovostnimi ležaji Elektronski pomik 7,5 kW Hod nastavitve valjev glede na levo vreteno, osno 35 mm Skrajšana razdalja med valji glede na desna vretena Števec dolžine, električni, z 2 števcema Kratka vstopna miza (1,2 m) z 2 pogonjenima valjema nad mizo 1 pogonjen, nazobčen valj v mizi, stranski pritiskovalni valj Avtomatska črpalka za vosek/sredstvo za mazanje Stroj z 4-valjnim izmetom, nihajne gredi podaljšane na 200 mm 2 pogonjena, nazobčena valja v izmetni mizi 2 pogonjena, nazobčena valja v strojni mizi Tlačna palica pred zgornjim vretenom in odvod za zgornjim vretenom z mehanskim digitalnim prikazovalnikom DigiSet (digitalni dvojni prikazovalnik) za levo in zgornje vreteno Električna nastavitev višine zgornjih vreten in pomika Chodou Agh Sspfx Agtja Prodaja v imenu stranke, na lokaciji v bližini 39100 Bolzano (Italija), brez razstavljanja, brez transporta in montaže Razstavljanje, natovarjanje in transport možni po dogovoru Napaka v opisu in ceni pridržana Za izognitev možnim nesporazumom je predhodni ogled na lokaciji po dogovoru možen in priporočljiv Prodaja se v obstoječem stanju Tehnične specifikacije, opis stanja, leto izdelave in obseg dobave v skladu s prospektom proizvajalca oz. prejšnjega lastnika, brez jamstva Medtem se prodaja pridržana Pri rabljenih strojih je izključeno vsakršno jamstvo, velja: „kupljeno kot videno“ Slike in videoposnetki so namenjeni kot primer in ne predstavljajo dejanskega obsega dobave Pogoji plačila: Cene so brez DDV, plačilo pred prevzemom oz. pošiljko Pogoji dostave: na lokaciji

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom Codetkt Tpepfx Agtsha 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm • Odsesovalni nastavek nad strojem

Stanje: novo, Leto izdelave: 2024, The Durma Tube Laser HD-TC 60220 stands for maximum precision and efficiency in tube material processing. With its impressive maximum tube diameter of Ø220 mm and the ability to cut both square profiles up to 160 x 160 mm and rectangular profiles up to 200 x 100 mm, this tube laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the capability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects requiring rapid production while maintaining consistently high quality. The minimum material length for automatic loading is 3000 mm, further enhancing the machine's efficiency and reducing processing time. Max. tube diameter: Ø220 mm Laser power: 3 kW Max. dimensions of square profile: 160 x 160 mm Max. dimensions of rectangular profile: 200 x 100 mm Min. tube diameter: 20 mm (12 mm with manual loading) Max. tube diameter for automatic loading: Ø170 mm Max. profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. material length: 6500 mm Min. material length for automatic loading: 3000 mm Last piece length: 4000 / 6000 mm Discharge length: 150 mm Max. material weight per meter: 52 kg/m Codpfjq Tpkyex Agtoha Max. material weight (total length): 340 kg Max. loading weight: 3000 kg Profile types: round, square, rectangular, elliptical Open profile types: L, U

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw Socolest DAS 200 with infeed and outfeed tables - Italian production - centering infeed table - drop-type outfeed table - top feed rollers TECHNICAL SPECIFICATIONS: - cutting height: 200 mm - cutting width: 400 mm - motor power: 2 x 55 kW - track width: 630 mm - max blade diameter: 350 mm - feed speed: 40 m/min - hydraulic height adjustment of shafts - hydraulic cutting height adjustment - hydraulic feed - four top feed rollers - four rows of anti-kickback fingers - shaft diameter: 70 mm - sleeve diameter: 90 mm - pneumatic side centering pressure - port diameter: 2 x 250 mm - minimum workpiece length: 720 mm - laser - belt infeed table: 5700 mm - table width: 600 mm - pneumatic top pressure roller - table speed adjustable via inverter - outfeed table: 9200 mm - roller width: 800 mm - roller diameter: 135 mm - four drop chains - chain spacing: 1900 mm Chodpfxjqup Ane Agtsa Transport dimensions: 1300 cm x 240 cm x 200 cm Weight: 8 t

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Chedpfok Nn Iljx Agtea