Oblikovalnik

WEINIG HYDROMAT (8 spindle)

Stanje: dober (rabljeno), Weinig Hydromat H23, 8-vretenčna 50 mm vreteni, 6.000 min⁻¹ Spodnje vreteno 7,5 kW, pripravljeno za robljenje Desno vreteno 7,5 kW, pripravljeno za vzdolžno robljenje Levo vreteno 15 kW, pripravljeno za vzdolžno in profilno robljenje Desno vreteno 11 kW, pripravljeno za profilno robljenje Zgornje vreteno 15 kW, pripravljeno za robljenje Spodnje vreteno 18,5 kW, pripravljeno za robljenje Zgornje vreteno 11 kW, pripravljeno za vzdolžno in profilno robljenje, z zunanjim ležajem Spodnje vreteno 7,5 kW, pripravljeno za vzdolžno in profilno robljenje, z zunanjim ležajem Pogon podajalnika 7,5 kW Avtomatski sistem za mazanje Blsdoyl Rm Dspfx Afned Popolna težka zvočna zaščitna kabina Možnost dobave z dovodom in odvodom za štiristranski skobeljni stroj po potrebi. Možna dobava orodja po potrebi.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale Bjdpfswclkysx Afneld - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Bjdpowmm Alefx Afnold Leto izdelave: 1998 Lokacija: Francija, Savoja

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Blsdpfxogwqk Sj Afnod Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni.

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Blsdpjw H Iv Tofx Afnjd Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm Bedpfx Afowwl Nlenold SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: dober (rabljeno), Weinig Hydromat H23 50 mm vretena, 6.000 obr./min Spodní frézka připravena, 15 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Horní frézka připravena, 15 kW Spodní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Horní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Spodní frézka připravena, 15 kW Možnost dodatečného osazení dalšími rovinnými nebo profilovými frézami dle potřeby! Bodpfx Afewmw Nvonjld Motor posuvu 15 kW Automatický mazací systém Možnost dodání vstupního a výstupního dopravníku k hoblovce dle potřeby. Možnost nabídky nástrojů dle požadavku.

Stanje: pripravljen za uporabo (rabljen), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Bjdem Habdjpfx Afnold

Stanje: rabljeno, Technical data: Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Number of steel feed rollers (top): 5 Number of rubber feed rollers (top): 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via drive shafts (cardan shafts) Table lubrication pump Operating pressure: 6 bar Electric height adjustment of the machine frame Power supply: 400 V Overall dimensions: Length: 4,240 mm Bjdpsmiik Tjfx Afnold Width: 1,550 mm Height: 1,560 mm

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Bjdpfx Aeu Agh Sofneld Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site