Razkoščevalnik

Valon Kone VK26M

Stanje: delavnici obnovljeno (rabljeno), B., VK26M (Model Year 1974) with motorized outfeed table: - Main machine - Infeed table (powered) - Outfeed table - Control cabinet Including infeed and outfeed tables, workshop-inspected* - Debarking capacity: 10cm - 61cm diameter - 4 main strippers - 4 peeling knives - Rotor speed: 235 rpm - Rotor opening: 65cm - 30 kW motor, speed 1500 rpm - Feed speed: 17-42 m/min - Timber length: 3m or longer Dimensions (without infeed and outfeed tables): L = 9840mm Infeed table: 3540mm x 1000mm x 1900mm Main machine VK26M: 2530mm x 2200mm x 2350mm Outfeed table (motorized): 3170mm x 1000mm x 1300mm REFURBISHMENT: Bdedpfx Akofn Iu Isrsc Pos 1 1 Lot: Dismantling, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material: Knife shafts on rotor, new bearings and seals (if required) Pos 3 5 pcs. Miscellaneous materials: V-belts for rotor drive Pos 4 1 Gear oil Pos 5 1 Materials: Abrasives & paints Pos 6 4 pcs. Valonkone peeling knives Pos 7 4 pcs. Valonkone pre-separators Pos 8 1 Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW gear motor with start for 4 kW gear motor (infeed drive) with start for 4 kW gear motor (outfeed drive) Main starter Emergency STOP

Stanje: rabljeno, ENAOSNI DROBILEC WEIMA MODEL WLK15 GLAVNI MOTOR 90KW REZILA ROTORJA 50X50 (NOVA REZILA) DOLŽINA ROTORJA 1500MM Bodpfotqd Ndsx Akrjdc PREMER ROTORJA 370MM STROJ JE 100% FUNKCIONALEN PRIPRAVLJEN ZA DELO

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1974, Valonkone VK26M (Series 1974) with discharge table: - Main machine - Feed table (powered) - Discharge table - Control cabinet IMMEDIATELY available from stock Including infeed and discharge tables, workshop-inspected * - Debarking capacity: 10 cm - 61 cm diameter - 4 main separator wheels - 4 cutting knives - Rotor speed = 235 rpm - Rotor opening = 65 cm - 30 kW motor, speed 1500 rpm - Feed rate: 17-42 m/min - 3 m or longer (log length) Dimensions (excluding infeed and discharge tables) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Discharge table (motorised table): 3170 mm x 1000 mm x 1300 mm Bedpfxstwrp Do Akrsdc REFURBISHMENT: Pos 1: 1 unit - Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2: 1 unit - Material: knife shafts on rotor with new bearings and sealing (if required) Pos 3: 5 units - Miscellaneous material: pieces of V-belts for rotor drive Pos 4: 1 unit - Gearbox oil Pos 5: 1 unit - Material: abrasives + paints Pos 6: 4 units - Valonkone peeling knives Pos 7: 4 units - Valonkone pre-separator wheels Pos 8: 1 unit - Control cabinet: with 3-phase delta start for 30 kW main motor with 3-phase delta start for 11 kW geared motor with start for 4 kW geared motor feeder with start for 4 kW geared motor discharge Main starter Emergency STOP

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Robot Fanuc R-2000iB/210F (E-25677) Year of manufacture: 2006 Maximum arm reach: 2655 mm Bsdpfx Aoizth Hekrjdc Controller: Fanuc R-J3IC Payload capacity: 210 kg 5 robots available, each equipped with a different end-of-arm tool.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 960 h, nosilnost: 2.500 kg, dvižna višina: 3.700 mm, prosto dvigovanje: 1.260 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.000 mm, moč: 44 kW (59,82 KM), dolžina vilic: 1.200 mm, lastna masa: 3.600 kg, skupna dolžina: 2.260 mm, vrsta pogona: Diesel, gradbena širina: 1.540 mm, Terenski viličar Težišče bremena: 500 Tip droga: Triplex Menjalnik: Hidrostatični Razred hitrosti: 20 Stanje: Kot novo Tehnično stanje: zelo dobro Tip pnevmatik spredaj: zračni Velikost pnevmatik spredaj: 15.5/55 R 18 Stanje pnevmatik spredaj: 80–100 % Tip pnevmatik zadaj: zračni Stanje pnevmatik zadaj: 60–80 % Bočni pomik, 3. ventil, 4. ventil, polkabin, Bjdpfx Akjw N Tpporedc

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni. Bdodpfsgwqk Ssx Akrsc

Stanje: delavnici obnovljeno (rabljeno), VK 450 Odkorňovačka byla kompletně repasována. Bdsdpoq Hr N Ijfx Akroc

Stanje: dober (rabljeno), Leto izdelave: 2006, Prodajam avtomatsko pnevmatsko žago Weinig Grecon Dimter Opticut 200 Elite, letnik 2006. Moč motorja: 7,5 kW Avtomatska vhodna miza 4,10 m (pretočni sistem) Avtomatska izhodna miza Bodpfx Aextxi Ijkrsdc 6 izmetalnikov na desni izhodni mizi. Optimizacija z avtomatskim zaznavanjem napak in avtomatskim programiranjem rezalnih shem. Na voljo takoj. CE oprema. Dokumenti vključeni.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: GP6000H2, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, stiskalna sila: 12 t, skupna dolžina: 6.000 mm, skupna masa: 2.600 kg, delovna širina: 180 mm, delovna dolžina: 6.000 mm, Oprema: dokumentacija / priročnik, šasija, MASIVNA STISKALNICA ZA LEPLJENJE LESA, Glulam Tehnični podatki: Dolžina lepljenja: 6 m, (Opcije 12m,18m,24m) Več stiskalnic se lahko po potrebi zloži skupaj do želene dolžine (segmenti po 6 m) Dolžina pritisne letve: 980 mm Širina lepljenja: od 80 mm do 180 mm Skupna višina lepljenja: od 800 do 1300 mm Hod cilindra: 150 do 300 mm Sila stiska: max 12t na cilinder, oz. po naročilu, ustrezna sila se nastavlja na regulatorju tlaka 3D model stroja je na voljo, da lahko naačrtujete postavitev v proizvodnjo. Hidravlični agregat je opremljen s hidravličnim akumulatorjem in tlačnim stikalom, ki omogočata, da se med časomstiskanja hidravlična črpalka vklaplja samo občasno. Hidravlični akumulator zagotavlja konstanten tlak, tudi, ko črpalka ni v delovanju. Po padcu tlaka se črpalka ponovno vklopi in napolni akumulator. Cikel vklopov črpalke: cca 10 sekund. Vse površine, ki prihajajo v stik z lepilom, so zaščitene z polirano nerjavno pločevino, ki omogoča enostavno čiščenje lepila z vodo. Na stiskalnici sta dva vozička s pnevmatskima cilindroma za bočno poravnavo lepljenca. Masa stroja: 2600 kg Priklopna moč stroja: 5 kW, 3 x 400 VAC, Opcije: -prilagojena dolžina do 6 metrov -število vozičkov za bočno poravnavo je po naročilu -Voziček z valjem za nanos lepila po naročilu Bdedpfx Asu Axfcokrsc -Več stiskalnic se lahko po potrebi zloži skupaj do želene dolžine (segmenti po 6 m), zadnji segment po naročilu med 2,0 do 6,0 metrov. -Drugačna višina lepljenja Stroj je popolnoma testiran pri proizvajalcu. Cena ne vključuje prevoza in montaže. MASSIVE GLUING PRESS FOR GLUING WOOD, GLULAM Technical Specifications: Gluing Length: 6 m (Options: 12m,18m,24m) Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 12 tons per cylinder or as per inquiry; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Stanje: dober (rabljeno), Leto izdelave: 1980, maks. velikost palete 120 x 165 cm Bsdsxpi N Rjpfx Akredc 20 vodil za žeblje leto izdelave 1980, še vedno v dobrem stanju