Formier

Weinig H30N

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: nepreverjeno, premer gredi: 50 mm, moč: 77,5 kW (105,37 KM), Visokozmogljiv skobeljni in kalibracijski stroj / Štiristranski skobeljni stroj Proizvajalec: Weinig Tip: Hydromat 30 / H 30 N Stroj izvira iz tovarne parketa Širina skobljanja cca 220 mm Višina skobljanja cca 120 mm Razporeditev vreten: Spodaj (ravnalna glava), 22 kW Desno, 7,5 kW Levo, 18 kW Zgoraj, 30 kW Njdpfx Adsxr Hbvepewp Premer vretena: 50 mm Podajanje nastavljivo, 12 - 120 m/min Napetost: 380 V, 50 Hz

Stanje: zelo dobro (rabljeno), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following machining operations: Tenoning / Finger jointing / Drilling Mortising / Milling / 4/5-axis profiling. Technical specifications: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal axis X: 1,800 / 2,200 mm Nwsdpfsirmyqex Adpsp Transverse axis Y: 1,300 mm Vertical Z axis: 650 mm Clamping table length: 1,400 / 1,800 mm One axis - unlimited C-axis: +/- 180°

Stanje: zelo dobro (rabljeno), Four-Sided Planer Weinig H30N Working width: 300 mm Working height: 200 mm Number of spindles: 5 Spindle configuration: - Bottom: 11 kW - Right: 11 kW - Left: 11 kW, spindle angle adjustable up to 90° - Right: 7.5 kW, spindle angle adjustable up to 45° - Top: 11 kW Feed speed adjustable via variator up to 22 m/min Feed motor power: 9 kW Worktable drive: – 3 rows of serrated feed rollers before the first cutterhead – 5 rows of smooth feed rollers Top feed: – 9 rows of feed rollers Nwedpfx Adjumtlkjpop Machine weight: 6100 kg Machine dimensions: 470 x 190 x 160 cm (H)

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW Njdpfx Adstynpxjpewp • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine in very good condition, low hours – fully equipped. Njdpfx Adow E Ei Uspewp Additionally, 20 saw blades included in the package. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (angled cutting) Maximum log width: 1250/1090 mm Maximum cutting length: 8 m Main motor: 45 kW Cast iron wheels Wheel width: 130 mm Wheel diameter: 1200 mm Vertical lifting (up/down): dual TR60x9 (18) screw system + 11 kW Danfoss frequency inverter + Siemens 3-phase motor with brake Electrical motor for head up/down: 11 kW PV 45 bandsaw blade, length: 8685 mm, thickness: 1.2 mm, width: 140 mm / 150 mm Powered feed with electronic forward and reverse control, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electrical deactivation Digital thickness setting with Wravor V280 program Hydraulic power unit 40 l, tank with two pumps 13+6 l + 3 kW motor Complete hydraulic system Hydraulic bandsaw blade guide left and right HIWIN linear guides Hydraulic debarker / bark cutter 1 Hydraulic board ejector arm 1 Additional hydraulic ejector arm & board alignment guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 pipe holders: 1 Water cooling – automatic booster pump cooling (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication: 1 TRACK: Welded structure, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter on holders (mechanical roller): 4 Hydraulic log lifter on holders (hydraulic roller): 7 Set of lifting rollers: 7 hydraulic + 4 m: 1 New type hydraulic log turner: 3 Log centering device – 1 set: 4 Hydraulic aggregate 120 l, tank with single 50 l pump, 15 kW motor + Danfoss frequency inverter: 1 Cable carrier with energy chain: 14.5 C-profile support for ventilation – 4 double trolleys Belt outfeed conveyor 4 m with 1 m feed section + 3 kW electromotor, front part with hydraulic lifting

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg Nwsdpfxoqy E Rlo Adpjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item No.: SK-K-24001 Nwsdpfx Aswya Syodpep DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: rabljeno, Leto izdelave: 2006, Proizvajalec: Weinig Model: Unimat Super 4 Leto izdelave: 2006 Štiristranski skobeljni stroj Proizvajalec: WEINIG obnovljen Model: UNIMAT SUPER 4 z avtomatsko mehanizacijo kratkih obdelovancev EM15 - Leto izdelave: 2006 Tehnične specifikacije - Delovna širina: največ 150 mm - Delovna širina: najmanj 25 mm - Delovna višina: največ 50 mm - Delovna višina: najmanj 15 mm - Število vreten: 3 - Moč zgornjega vretena: 22 kW - Moč spodnjega vretena: 11 kW - Hitrost vrtenja vretena: največ 7.000 min⁻¹ - Premer vretena: 40 mm - Dolžina mize: 2.000 mm - Največja hitrost podajanja: 24 m/min - Neprestano nastavljivo podajanje Nwedpfeqprk Tsx Adpep - Poseben motor za vsako vreteno - Kardansko gnano podajanje valjev - Podajanje iz zalogovnika - Motorni pomik višine skobljanja - Avtomatska mazalna črpalka - WEINIG čelni rezkar - WEINIG EM 15 - Skupna priključna moč: 45 kW

Stanje: novo, Leto izdelave: 2025, CNC Milling Plotter 2040 SPECIAL is a precision machine engineered in Poland, designed for machining a wide variety of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is built entirely from high-quality steel. During the manufacturing process, all components undergo a dedicated heat-treatment process for added durability. WORKING AREA: The effective working area of the machine is 2100 x 4100 mm, and the entire worktable—manufactured using T-slot technology—measures 2100 x 4100 mm. Z-AXIS STROKE AND GANTRY CLEARANCE: The standard Z-axis travel is 200 mm, with an option to increase it to 400 mm on request. Nwedpfxoin Uils Adpep DRIVES: Our machines are equipped with high-resolution, high-power digital drives ensuring optimal acceleration and speed in all axes. The X and Y axes utilize reliable, industry-proven helical racks for enhanced durability and precision, while the Z-axis is powered by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: A powerful, water-cooled, and robust brushless spindle drives the cutting tool. The spindle features premium machine bearings for ultra-quiet operation and extended service life. Spindle speeds range from 6,000 to 24,000 RPM. The spindle is powered by a frequency inverter with higher output than the spindle itself, preventing RPM drops under heavy load. SOFTWARE: The machine is supplied with the latest version of CAD/CAM software, enabling quick and easy component design. The software then converts designs into G-code. Import of ready-to-use files from other software is also supported. CONTROL SYSTEM: Operation is via a controller equipped with its own processor and onboard memory for stable and reliable functioning. The controller features active vector analysis, providing smooth operation and minimal processing error. A resume function allows continuity of work after power loss, eliminating the need to restart programs. The built-in memory permits machine operation without constant program uploading. Optional features: * Vacuum table with Busch or Becker pump * Chip extraction system * Oil mist lubrication * Customizable table size

Stanje: rabljeno, WRAVOR WRC 1050 AC – Power, Precision, and Reliability in Wood Processing Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. _____ Key Benefits: High Efficiency: Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. Precise Cutting: Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Technical Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 30 m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ Nwedpfowfq Naox Adpsp WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today.