CNC center za profiliranje/stroj za izdelavo oken

Weinig Conturex Conturex 2 - C 124

Stanje: novo, Holzkraft minimax me 35 t s edge banding machine 5507235 For plastic edging from 0.4 - 3 mm, solid wood edging up to 5 mm, and workpieces from 8 - 50 mm Top configuration for high productivity with minimal space requirements! Intuitive operation with the eye-S control and large 10" touchscreen: HMI Maestro Active Edge; graphical display of all processing units and their operating status; graphical simulation of machining operations; control of all machining units; regulation of glue pot temperature; assistance functions for machine setup according to the machining program; error diagnostics for rapid resolution of simple faults; statistics on processing parameters; USB port; prepared for network connection. Excellent accessibility to the working units thanks to the large hood, which ensures protection and noise reduction Monoblock steel frame construction guarantees high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Automatic application of strip edging with edge magazine (me 35 t s): solid wood strips are automatically loaded and synchronized with the panel feed Panel feeding by chain conveyor with rubber-coated glide shoes Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 3314 mm Width/depth (product) approx. 1085 mm Height (product) approx. 1300 mm Weight (net) approx. 545 kg Flush radius trimming unit Flush radius trimming unit power 2 x 0.35 kW Flush radius trimming unit cutter diameter carbide 55.3 mm Flush radius trimming unit cutter speed 12,000 rpm Flush radius trimming unit extraction port diameter 2 x 60 mm Electrical Data Connection voltage 400 V Mains frequency 50 Hz Glue unit Glue pot power 0.25 kW Glue pot operating temperature 190°C Glue pot extraction port diameter 60 mm Glue pot filling capacity 0.8 kg Pneumatic connection Operating pressure 6.5 bar Feed Feed unit power 0.55 kW Feed speed 7 m/min Edging Edgeband thickness, coil material 0.4–3.0 mm Edgeband thickness, strip material 0.5–5 mm Pre-milling unit Pre-milling unit extraction port diameter 2 x 80 mm Pre-milling unit power 3 kW Pre-milling unit cutter speed 7,200 rpm Pre-milling unit diamond cutter diameter 80 mm Pre-milling unit cutter height 56 mm Nsdokknbqepfx Adpewp Pre-milling unit material removal 0.5 / 1 / 1.5 / 2 mm Scraper units Radius scraper 2 mm Buffing unit Buffing unit power 2 x 0.14 kW Buffing unit speed 2,800 rpm Workpiece Workpiece thickness 8–50 mm Workpiece length min. 120 mm Workpiece width min. 110 mm Holzkraft authorized dealer – Accessories available on request!

Stanje: zelo dobro (rabljeno), JET is a numerically controlled machining center with 5 interpolated axes, designed for the following machining operations: Tenoning / Finger jointing / Drilling Mortising / Milling / 4/5-axis profiling. Technical specifications: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal axis X: 1,800 / 2,200 mm Transverse axis Y: 1,300 mm Vertical Z axis: 650 mm Nwjdpfsirmyqsx Adpep Clamping table length: 1,400 / 1,800 mm One axis - unlimited C-axis: +/- 180°

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Wide Belt Sander DMC USK 1350 M3 – Italian-made – Cross-belt unit, also known as a 'sergeant' unit – Year of manufacture: 2011 – Equipped with both electric and pneumatic ionizers TECHNICAL SPECIFICATIONS: Maximum sanding width: 1350 mm Nsdogr Er Sepfx Adpjwp Sanding height range: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st Unit: – Cross-belt (sergeant-type) – Motor power: 12 kW 2nd Unit: – Rubber roller – Hardness: 95 Shore – Diameter: 240 mm – Motor power: 18.5 kW 3rd Unit: – Rubber roller – Hardness: 55 Shore – Roller diameter: 300 mm – Motor power: 15 kW 4th Unit: – Pneumatic pad – Motor power: 15 kW 5th Unit: – Cleaning brush – 2.2 kW 6th Unit: – Air blower – Blowing on belt – Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 x 250 x 250 cm Weight: 5000 kg

Leto izdelave: 2023, Stanje: novo, For sale: NEW WLO Octagon 49.5 kW Hot Air Furnace - Workshop Heater, Wood Stove, Industrial Space Heater Thanks to its powerful combustion chamber, this stove can accommodate logs up to 120 cm in length! Technical Specifications: - Rated thermal output: 49.5 kW (suitable for approx. 450 m²) - Includes: Axial fan with 1380 rpm and capacity: 5500 m³/h - Supplied with: Controller for operation of SCL-1515 fan - Innovative air jacket design fully surrounds the stove for maximum efficiency Nedpfx Aoixuq Dodpowp - Indestructible construction – entirely made from certified boiler plate steel P265GH & 16Mo6, thickness: 6 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 320 kg | Gross weight: 340 kg - Grate size: 1000 x 250 mm - Coated with certified heat-resistant paint for corrosion protection and aesthetic appeal - Heavy-duty construction - Massive combustion chamber: 120 x 80 cm! - Large loading door - User manual included - Efficiency: 75.00% - CO emissions at 13% O2: 1.20 m mg/Nm³ - Recommended fuel: Seasoned hardwood with ≤20% moisture, briquettes, coal only as an admixture up to 10% Safety and Certifications: - CE marking: YES / attached to type plate - Conforms to standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: - External: Width: 800 mm x Depth: 1600 mm x Height: 1200 mm - Stove body: Width: 800 mm x Length: 1200 mm x Height: 800 mm - Upper door (3 & 4 mm steel): Width: 520 mm x Height: 470 mm - Lower door (3 & 4 mm steel): Width: 360 mm x Height: 150 mm - Upper loading opening: Width: 460 mm x Height: 460 mm - Lower opening: Width: 360 mm x Height: 130 mm - Grate: Width: 250 mm x Depth: 1000 mm - Hot air outlet diameter: Ø 150 mm - Flue outlet diameter: Ø 200 mm - Leg height: 140 mm For further information or to arrange a viewing, please contact us.

Stanje: novo, Sheet thickness: 2.5 mm Nedpfxefv H Ehj Adpjwp Roll diameter: 98 mm Throat depth: 160 mm Total power requirement: 1.5 kW Machine weight: approx. 0.35 t Space required: approx. 550x1400x1500 mm Supplied with: • Manual version • 4 sets of rolls • Foot pedal control • Brake motor • Emergency stop

Stanje: delavnici obnovljeno (rabljeno), Krimptunnel / foliewikkelaar Fabrikant: Kallfass Type: semi-/automatische krimptunnel Model: Combimatic 600 Frame: gelakt staal Bereik: max. pakket B x L x H = 600 x 380 x 400 mm Capaciteit: max. 600 verpakkingen/min Afmetingen: L x B x H = 4.200 x 1.550 x 2.000 mm Gewicht: 850 kg Stroomvoorziening: 380 Volt – 50Hz – 23,5 kW Uitvoering: - mobiel - watergekoelde lasbalk - automatisch / semi-automatisch - tweehandbediening Nwodpfx Aeg D Nyhedpep Opmerking: in uitstekende staat

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Features and technical specifications: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connection: 400 V +/- 5 % / 50 Hz Included: Press mechanism with feed cylinder, main cylinder, clamping cylinder Connection part for transport pipe Chromed clamping tongs Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and screw conveyor discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control unit Briquette length monitoring Automatic end-position of all cylinders Manual control Automatic on/off with fill level limit switch Material: Planer shavings, wood shavings from solid wood, loose, clean and free from foreign matter* Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year * Specification of contaminants: Any material other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on material. Stated values are averages. Depending on mixing ratio, moisture content, and material properties! Application not or not fully specified/disclosed. Machine is sold appropriately and solution-oriented by a specialist dealer. If heat builds up due to blockages, operating time may be drastically reduced. Availability: short-term Stock location: Solingen Njdpfx Adst Hagnopewp

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), An angular processing line for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, tenoning spindle length: 640 mm, profiling and feed pass length: 285 mm–320 mm, control system: Siemens WS400. Includes complete tool set and sash window tooling. Documentation available. Nedpfxetq U A Ij Adpewp

Stanje: novo, Leto izdelave: 2025, CNC Milling Plotter 2040 SPECIAL is a precision machine engineered in Poland, designed for machining a wide variety of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is built entirely from high-quality steel. During the manufacturing process, all components undergo a dedicated heat-treatment process for added durability. WORKING AREA: The effective working area of the machine is 2100 x 4100 mm, and the entire worktable—manufactured using T-slot technology—measures 2100 x 4100 mm. Z-AXIS STROKE AND GANTRY CLEARANCE: The standard Z-axis travel is 200 mm, with an option to increase it to 400 mm on request. DRIVES: Our machines are equipped with high-resolution, high-power digital drives ensuring optimal acceleration and speed in all axes. The X and Y axes utilize reliable, industry-proven helical racks for enhanced durability and precision, while the Z-axis is powered by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: A powerful, water-cooled, and robust brushless spindle drives the cutting tool. The spindle features premium machine bearings for ultra-quiet operation and extended service life. Spindle speeds range from 6,000 to 24,000 RPM. The spindle is powered by a frequency inverter with higher output than the spindle itself, preventing RPM drops under heavy load. SOFTWARE: The machine is supplied with the latest version of CAD/CAM software, enabling quick and easy component design. The software then converts designs into G-code. Import of ready-to-use files from other software is also supported. Nsdpein Uilefx Adpswp CONTROL SYSTEM: Operation is via a controller equipped with its own processor and onboard memory for stable and reliable functioning. The controller features active vector analysis, providing smooth operation and minimal processing error. A resume function allows continuity of work after power loss, eliminating the need to restart programs. The built-in memory permits machine operation without constant program uploading. Optional features: * Vacuum table with Busch or Becker pump * Chip extraction system * Oil mist lubrication * Customizable table size

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 278 h, Max. workpiece size for re-milling X = 3620 mm; Maximum travel distances: X = 3865 mm Minimum room height 3.20 m Machining in Y and Z Y = 1600 mm; Max. panel width 2000 mm Maximum workpiece height 300 mm (measured from upper edge of vacuum suction cup 125 mm) MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software, 1 x license incl. CabinetControl Base and material removal simulation 1 software license secured by dongle for the machine CabinetControl Base: Software for furniture design and production CAMPUS V7 PLUS: Software for CNC processing centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld controller for remote operation of the machine MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0–24,000 rpm, infinitely variable Gimbaled; C-axis +/- 360° rotatable, A-axis +/- 180° rotatable Liquid cooling (cooling unit included) with HSK-F 63 tool holder Max. tool weight: 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster to increase standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles, individually selectable L-shaped arrangement, 11+2 in X, 6 in Y direction, 32 mm pitch n (max.) 1,000–5,710 rpm, infinitely variable 6 horizontal spindles 2 double drill spindles in X direction 1 double drill spindle in Y direction including saw unit Integrated saw unit for sawing/grooving in X direction n(max.) 1,000–7,330 rpm, infinitely variable Nwedpfx Ajxfaf Uodpjp MACHINE TABLE Machine table: 6 consoles, pneumatically clamped, movable in X direction Display and assignment of consoles and suction cups in the software 2 side stops field A and D, 2 large-area buttons for clamping and releasing workpieces, 2 tape measure displays for positioning the consoles in X, referenced to stop field A/D, tape measure displays for suction cups on each console in Y, referenced to the rear stop STOPS 2 additional machining fields in front for 6 consoles (4-field machining) 4 pneumatically controlled stops per field, including 1 stop per console and one side stop in X direction per field FEEDING AIDS 4 pneumatically liftable and lowerable feeding aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travels automatically in X direction Traveling tool changer 7886, 1-position saw blade magazine Specially designed for large saw blade diameters up to 350 mm Pick-up system installed on the gantry, pneumatic Max. tool Ø: 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running compressor LED light for the machining area. SAFETY OPTIONS Safety enclosure according to CE standard Protective fence on the side and rear CONFIGURATION VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension – ideal for 4-field machining and large workpieces 2 controlled pneumatic modules for up to 5 frame clamping elements per field (A/D) Each module can control up to 5 frame clamping elements simultaneously. Simultaneous opening/closing of connected clamping elements; includes foot pedal for operation, max. 2 per field A and D can be ordered OPTIONAL: LASER – laser pointer, consisting of two laser pointers for positioning the vacuum suction cups.