Okenski sistem

WEINIG, Goetzinger Unicontrol 11, Univar 6, Power

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Univar 15 Ncedsh H Iyxjpfx Ah Ujt Unitex 15

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Ncedpfx Ahjxpi Duo Ust 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: rabljeno, Slot spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and trimming carriage ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical data summary (additional accessories possibly included, please inquire) ..... Crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for identifying saw cuts > Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with crosscut saw. > Radial adjustment: pneumatically operated on/off Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm Nodpsx H Al Nefx Ah Uoct > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Transfer belt ..... For transferring parts to the longitudinal machining section, including part separation for doubles infeed to the longitudinal machining. 1st Profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled according to tool diameter 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), Automatic flipping device WEINIG UNIVAR 10 Nedsf Upzhjpfx Ah Uoct

Stanje: rabljeno, Leto izdelave: 2004, Slotting spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm CNC control, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles as well as VARIO table ..... Machine is already professionally dismantled and stored in 73447 Oberkochen Technical Data Summary (for any additionally included accessories, please inquire) ..... Cross-cut saw ..... > Cross-cut saw electronic, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide for cut recognition > Axial adjustment range 150 mm NC axis, electronically stepless > Radial adjustment range pneumatically adjustable in 8 positions e.g. for edge rounding from above Rounding unit ..... > Position: horizontal below > Axial adjustment range together with cross-cut saw. Electronic length stop ..... > Length: 4500 mm 1. Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Outfeed counter, full clamping length countered 2. Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400 mm > Outfeed counter, full clamping length countered Transfer conveyor ..... For transferring parts to the longitudinal processing, including Double part separation before entry into longitudinal processing. 1. Profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool diameter min.: 140 mm > Tool diameter max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless Ncodpfxsyrtzkj Ah Uot > Spindle speed: 6000 rpm > Tool diameter min.: 140 mm > Tool diameter max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontal above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless