Weeke Optimat BP 145

Weeke Optimat BP 145

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: P 04-09-002, neu U05 10 001, Venjakob HGS-K Automatic Spray Machine All images are for reference only - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (1000 mm) - Current condition: not overhauled - Offer price for overhauled condition - Operator side: right - Dual gun drive system - Dry extraction: 4,000 m³/h - Extraction nozzle diameter: 400 mm - Conveyor belt transport system - Feed speed steplessly adjustable: 3 - 8 m/min - With paint recovery system Iodpjumvr Tofx Adkehw - Gun control: LS 1 - Installed color circuits: 1 unit - Airless spray system: 4 x Krautzberger KAA 1300 - Number of paint pumps: 1 unit - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current rating: 17 A, fuse: 35 A - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide a quotation for installation and commissioning of the system as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: rabljeno, številka stroja/vozila: 007716, Working area X-axis: 3250 mm Ihedswuz N Nspfx Adkew Working area Y-axis: 1220 mm Working table: With vacuum pod supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Iedpfxevvkd Tj Adkehw

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Ijdpfjxdl Raox Adkehw Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: max. length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion tool (positioned 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue quantity - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimension: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feeding 1. BASE MACHINE - Sturdy steel frame construction - Axis movement in X, Y, and Z directions - Ball screw (Y and Z axis) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manual actuation via selector switch - 6 top hold-down cylinders, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 154 h, potovalna razdalja osi X: 215 mm, pomik osi Y: 100 mm, pomik po osi Z: 605 mm, skupna višina: 1.725 mm, skupna širina: 1.690 mm, skupna masa: 4.650 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: SMOOTH Ez, število osi: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 rpm with a motor power of 15.0 kW. It is equipped with a 12-position turret and rapid traverse rates of 30, 10, and 30 m/min in the X, Y, and Z axes, respectively. Contact us for further information about this machine. Additional equipment • Transformer for Europe (CE marking) • Roller guide with spherical roller bearings • SD card interface + USB storage interface • 1 set of control buttons • Foundation kit (steel plates) • CE certification (with noise filter) • C-axis positioning 0.0001° increment • 12-position turret • Y-axis control • Bar feeder interface Additional information Automatic parts catcher High-pressure coolant system Preparation for chip conveyor 8" open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Ihodpfxex D R Svo Adkew Cylindrical and polar coordinate engraving function Automatic picking cycle with load detection Quick-change tool holder system Bar stock diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and workpiece end: 81 to 686 mm Turret Number of tool stations: 12 Tool size (external turning): 25 mm Tool size (internal turning): 40 mm Tool size (driven drill): 20 mm Tool size (driven end mill): 20 mm Tool size (driven tap): M20 Indexing time per station: 0.23 s Indexing time for full rotation: 0.63 s Tailstock Quill bore (Morse taper): MT No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools: Milling spindle power (continuous): 3.7 kW Milling spindle power (40% duty cycle): 5.5 kW Maximum milling spindle speed: 4,500 rpm Minimum milling spindle speed: 20 rpm Media: Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine depth: 2785 mm

Stanje: kot nova (razstavni stroj), Demonstration unit with 7 operating hours Another machine available immediately (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multi-turnable Hydraulically actuated pusher Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - automatic star/delta start-up - fast hydraulic system - automatic shut-off during rotor idle Ihedpfjv Sqrpsx Adksw - Rotation speed 70-90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding untreated wood, chipboard and MDF panels; other materials possible after testing and approval by the manufacturer . Included: - Shredder raised by 30 cm (prepared for conveyor belt) Additional shredder options: - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronised with the shredder) . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. Ihsdpfjvvi Rfjx Adkjw To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: rabljeno, številka stroja/vozila: 006906, Delovno območje os X: 4175 mm Delovno območje os Y: 1730 mm Delovna površina: Z vakuumskimi konzolnimi ležišči Moč glavnega vretena: 18,5 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 20 Iedpewgktbefx Adkehw Število mest za orodja: 18

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Ijdpfxjh Ryhno Adkehw Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 2.200 mm, skupna dolžina: 4.550 mm, skupna širina: 2.200 mm, Poids à vide : 3 000 kg - Année de fabrication : 2018 - Documentation disponible : Non - Marquage CE présent : Oui - Certificat CE présent : Oui - Numéro de série : AH00000267 - Type de table de fraisage : Table à poutres - Outil de perçage inclus : Oui - Unité de sciage incluse : Oui - Dispositif de sécurité : Clôture de sécurité - Pompe à vide incluse : Oui - └ Quantité [pc] : 1 - └ Marque : Becker - └ Puissance du moteur principal [kW] : 2,2 - └ Diamètre de raccordement [mm] : 33 - Surface de travail X [mm] : 3050 - Surface de travail Y [mm] : 1250 - Surface de travail axe Z [mm] : 130 - Dimensions de transport : 4550 mm x 2200 mm x 2200 mm (L x l x h) - Poids de transport [kg] : 3000 kg Ihodsxn S H Njpfx Adksw - Nombre de colis de transport : 3 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA récupérable pour les entreprises Livraison et reprise possible à tout moment pour tout équipement industriel Glenn Smeets