Obdelovalni center

WEEKE BHC VENTURE 2M

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPL 380 Podatki o rezu in dvižni mizi Dolžina reza: 4.300 mm Velikost reza z dvižno mizo: 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (maks.): 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (min.): 1.200 mm x 400 mm Višine skladov Višina sklada na dvižni mizi ob postavitvi na ravni tal (maks.): 560 mm Višina sklada na dvižni mizi ob postavitvi v jami (maks.): 780 mm Nosilnost dvižne mize (maks.): 4 t Valjčne tirnice Valjčna tirnica, 10-stezna: 1 kos Dusdox Nf Eqjpfx Af Sor Valjčna tirnica, 2-stezna: 6 kosov Vpenjalne klešče Razmiki: 75/275/475/1.075/1.825/2.625/3.425 mm Odsesovalne in zračne mize Pozicija odlagalne naprave: 2.375 mm Zračna miza z valji 2.160 x 800 mm: 1 kos Zračna miza z valji 2.160 x 650 mm: 3 kosi Centralni ventilator: 1 kos Razvodna cev za zračne mize: 70 x 70 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller track (2-lane elements): 9 units Clamps: 7 units, first 3 with 2-finger design Air cushion table width: 650 mm, 4 pcs, each 2160 mm long Central blower: 1 unit with increased blower performance – 3 inclined lift clamps (2-finger): – 1 inclined lift clamp (1-finger): – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1–150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. clamping width 0 mm, max. clamping width up to full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Dsdpeymx S Dofx Af Sour Labelling with part graphics / label program / label printer PICA 104

Stanje: rabljeno, številka stroja/vozila: 007716, Working area X-axis: 3250 mm Dodpfxjwuz N No Af Sour Working area Y-axis: 1220 mm Working table: With vacuum pod supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: HOLZMA Model: OPT HPP 350/43/43/X Tip stroja: Žarkovna žaga Leto izdelave: 2005 Obratovalno stanje: še priklopljen Dolžina reza: 4.300 mm Hod potiskača: 4.250 mm Število prijemal: 6 Maksimalna hitrost pomika: 130 m/min Dsdpsxwwfvsfx Af Sjur Neprestano nastavljiv pomik Izstop žaginega lista: 80 mm Maksimalni premer žaginega lista: 350 mm Moč glavnega motorja: 9 kW Predrezila: Da Stran zadrževalnika: desna stran Krmiljenje: HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Oznaka skladnosti: CE Teža: 5.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Dimenzije rezanja: 4300x4300 mm Višina rezanja: 95 mm Pomik nosilca z prijemali: 90 m/min Hitrost rezanja do 150 m/min, brezstopenjsko nastavljiva Moč glavnega motorja: 13,5 kW Duedpfx Aeylbdtsf Ssr Moč predrezovalnega motorja: 2,2 kW Premer žagine plošče: 350 mm 4 zračne mize Potreba po odsesavanju: 3800 m³/h Zunanje dimenzije: 6500x7700 mm

Stanje: rabljeno, številka stroja/vozila: 008368, Maks. širina panela: 3800 mm Maks. dolžina panela: 3800 mm Maks. izstop glavnega žaginega lista: 75 mm Število vpenjalnih čeljusti: 6 Dedjykivnjpfx Af Sjur

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces Dodpfx Ajyv In Ief Seur • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: rabljeno, Panelna žaga Holzma HPP 250r, Djdpfx Afsyvgnmj Ssur Podrezovalnik 1,1 kW, Dolžina reza 3800 mm, Širina reza 3800 mm, 6 vpenjal, Maksimalni premer žaginega lista 350 mm, Krmiljenje Holzma Cadmatic, CE oznaka.

Stanje: rabljeno, številka stroja/vozila: 008394, Najv. širina plošče: 3800 mm Najv. dolžina plošče: 3800 mm Dodpfxsygtbtj Af Sjur Najv. izstop glavnega žaginega lista: 55 mm Število vpenjal: 4

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTRE (POINT-TO-POINT) – 4 Axes Gantry-type design Power Control CNC – woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum pod positioning Automatic tool change system Dsdpfx Aeyxn Tief Sour 2 disc-type tool changers – magazine/tool positions: W8 (8 rear) + (8 lateral) Maximum working area (X – Y – Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones – 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electrical cabinet and control system Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 in X-axis + 2 in Y-axis) Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 – swivels 90° in X-Y direction 1 vertical main spindle (milling unit) HSK 63, 9 kW OPTION: Drilling and milling unit with 4 horizontal spindles (cross spindle) BARCODE READING SYSTEM PACKAGE – PROFESSIONAL