CNC stroj za rezanje z vodnim curkom

waterjet 3000 x 1800

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Rjdjfzktzspfx Ag Tsp Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Miza za montažo kril Rotox, letnik 2017; avtomatsko podajanje vijakov, nastavljiva višina vijačnika, preša za okovje (Maco), vrtalna enota za kotna ležišča, regal za okovje. Rjdpfox Rtpaox Ag Tjp

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction Redpfx Aew D Dhaog Tsp - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Fully operational, available for inspection in Wadowice Redpfx Ajwpthtog Top X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Control type: CNC XP 600

Stanje: dober (rabljeno), Leto izdelave: 2001, Prodajam 3-osni CNC obdelovalni center HOLZ-HER UNI-MASTER 7226 s prečnim delovnim mizo, letnik 2001. Konfiguracija: Glavno vreteno za 3 osi, popolnoma obnovljeno / vodno hlajeno Magazin za orodja za 6 HSK63 mest na glavi Rodpfx Agei U Dxus Tsp 1x utorna žaga v X-smeri Vrtalna glava s 16+4 vrtalnimi vreteni Uporabna delovna površina 3100x1360 mm 2 delovni območji, 4 vpenjalna območja Avtomatski sistem centralnega mazanja Holzher programska oprema z navodili za uporabo Črpalka SIEMENS ELMO-L S22 2,35 kW Dodatni vakuum za šablonska dela ali dodatne vpenjalne naprave Dobro stanje. Na voljo takoj iz zaloge.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, • Debelina stekla (mm): do 30 • Višina stekla (mm): do 2000 Rodpfxexgtqgs Ag Top • Čistilne krtače: 4 spredaj in 4 zadaj

Stanje: rabljeno, številka stroja/vozila: 007350, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Rodpfx Ajwcyd Isg Tjp Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28

Stanje: rabljeno, Skupna višina 6500 mm, tloris 2000 x 2000 mm, postavitev na prostem. Kompaktna filtrirna serija, model PKFP – 1 element – 1,92 x 1,92. Filtrirni sistem z stresanjem, nadtlakovno delovanje. Dolžina filtrirne vreče 2500 mm, premer 180 mm, filtrirna površina 105 m². 2 ventilatorja za surovi zrak, 2 cevi (premer 300 mm). 1 x ventilator KT 300, moč 15 kW, zmogljivost 6361 m³/h, letnik 1999. 1 x ventilator S 25 / 300, moč 7,5 kW, zmogljivost 7400 m³/h, letnik 1993. 1 x transportni ventilator 6,1 kW, zmogljivost 57 m³/min, letnik 1996. Skupen volumenski pretok cca 14.000 m³/h. Briketirni stroj Höcker Polytechnik tip BrikStar C 3 - 12.1225, motor 3,0 kW, premer briket 65 mm okrogle, kapaciteta cca 40-45 kg/h, odvisno od specifične teže materiala. Lokacija skladišča: Nattheim. Rjdpfx Aevviytsg Tjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Vertikalni stroj za obdelavo robov stekla z 10 skodeličnimi koluti, nastavljiv kot 0-45° Rsdpfxjw U Dduj Ag Tep dejansko prevoženih metrov: 260.000 min. dimenzija stekla: 40 x 40 mm debeljina stekla: 3 - 55 mm hitrost: 0,4 - 6 m/min napetost: 400 V 50 Hz 39 A teža: 4600 kg