Stroj za navijanje vzmeti

WAFIOS FM50

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Iodovc Aklspfx Aa Uoar Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: novo, Leto izdelave: 2025, - TFON Sistem zaobljenja ivica i površinske dekontaminacije. - Kompatibilnost materijala: Pogodno za nisko-ugljenični čelik, aluminijum i nerđajući čelik. - Radni spektar debljine: Obrađuje materijale debljine od 0 do 120 mm. - Zaobljenje ivica: Obezbeđuje zaobljenje ivica radijusa 2, za glatke i sigurne ivice koje unapređuju izgled i funkcionalnost izratka. - Precizna kontrola: Opremljen Siemens automatskim sistemom za preciznu i doslednu kontrolu tokom celokupnog procesa. - Nezavisne stanice: Isdpohq A T Uefx Aa Uoar Više procesnih stanica omogućava raznovrsne operacije – različiti zahvati mogu se izvoditi istovremeno ili uzastopno. - Opcije radne površine: Dostupne dimenzije radnih stolova: 650 mm, 1000 mm ili 1300 mm, u zavisnosti od potreba proizvodnje. - Tipovi stolova: Fleksibilne konfiguracije uključuju magnetne, vakuumske ili magnetno-vakuumske stolove, što omogućava sigurno fiksiranje raznih materijala i veličina delova. - Plazma i kiseonička tehnologija: Koristi naprednu plazma i kiseoničku tehnologiju za efikasno uklanjanje debelih strugotina i šljake nakon sečenja, omogućavajući čistiju i glatkiju površinu. - Površinska dekontaminacija: Efikasno uklanja površinske nečistoće kao što su rđa, oksid ili skala, pripremajući delove za dalje procese. - Zaobljenje ivica za potrebe zaštitnog premaza: Savršeno priprema površinu za farbanje i nanošenje zaštitnih premaza, obezbeđujući ravnomernu i besprekornu završnu obradu. - Industrijske primene: Idealan za centre za obradu čelika, energetiku, rudarstvo, građevinsku i automobilsku industriju – prilagođena rešenja za zahtevne primene. - Ujednačeni rezultati: Šest lamelnih točkova radi sinhronizovano, obezbeđujući konstantne, jednako zaobljene ivice na svakom delu. - Pneumatski sistem oscilovanja: Produžava vek trajanja brusnih traka minimiziranjem habanja i održavanjem stalnog kvaliteta obrade tokom vremena.

Leto izdelave: 1963, stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Iaodpfx Ajh I Edvoa Usr

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Iedpfjt Hw Shox Aa Uoar Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Iajdpov Nhx Uefx Aa Usr Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Leto izdelave: 1995, stanje: pripravljen za uporabo (rabljen), A Schenker spring coiling machine is available, including a 2-finger coiling system (left and right), a multi-stroke unit, and a Böhm MRS-1 length measuring device. Wire diameter range: 0.4 mm – 1.8 mm, spring outer diameter: 2 mm – 30 mm, production capacity: 400 springs/min, max. material strength: 2400 N/mm², spring outer diameter range: 2 mm – 30 mm, wire feed length: 30 mm / 470 mm / 770 mm / 1200 mm. Machine dimensions (X/Y/Z): approx. 1150 mm / 900 mm / 1450 mm, weight: approx. 1000 kg. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation is available. On-site inspection is possible. Isdpfxsv Ip Sme Aa Uoar

Stanje: potreben popravila (rabljeno), Leto izdelave: 2014, Funkcionalnost: nefunkcionalno, HTC / Manentimacchine SRL bale wrapper including camera technology Model: HTC16CF Currently non-operational – conversion to working condition available for an additional charge of €4,000 per unit. Ijdpfx Aaetdrkmj Uoar Two machines available for sale.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, laserska moč: 12.000 W, BAISON V52U (12+12 mètres) : (12 ou 20 kW) MACHINE DE COUPE LASER FIBRE POUR TUBES LOURDS À QUATRE MORS AVEC SYSTÈME DE CHARGEMENT ET DE DÉCHARGEMENT AUTOMATIQUE Système de chargement automatique 12 mètres + système de déchargement automatique 12 mètres (Possibilité d'équipements en différentes configurations, par ex : 12+6 mètres) Cette machine est également adaptée pour la découpe de profilés, tubes et différentes formes. Capacité tubes : Tube rond : φ50-φ500 mm Tube carré : □50*50 - □500*500 mm Poutrelle U : 5#-50# Cornière : 200*200 mm Poutrelle I : 10#-50# Poutrelle H : 100*100 mm - 500*500 mm Puissance laser : 12 000 W (Raycus) Poids max. du tube unitaire : 2 000 kg Course des mors : course intégrale Longueur minimale restante : 0 mm Vitesse max. des mandrins : 40 tr/min Vitesse max. : 50 m/min Accélération max. : 0,4 G Longueur max. de coupe tube : 12 000 mm Longueur résiduelle ultra-courte : 0 mm X-axis : 500 mm Y-axis : 12 000 mm Z-axis : 500 mm Précision de positionnement (X/Y) : ±0,05 mm/m Précision de répétabilité (X/Y) : ±0,05 mm Données de puissance : 130 kW / 225A Alimentation électrique : 380V/50Hz/3 phases Indice de protection machine : IP54 Dimensions machine : 29 080 x 5 000 x 3 250 mm Poids machine : 28 165 kg (incluant système de chargement semi-automatique et système de déchargement automatique) Configuration : ACCESSOIRES INCLUS Source laser RAYCUS 12 kW Tête laser à focalisation automatique – RAYTOOLS BS12K-3D Contrôleur – FSCUT 5000A Mandrins pneumatiques auto-centrants automatiques Système de chargement semi-automatique par chaîne Servomoteurs VEICHI Réducteur TECHMECH Transmission X/Y de haute précision par crémaillère et rails K.H Rails de guidage SHAC Système industriel de refroidissement/chauffage bi-zone du laser – HANLI Vanne proportionnelle AVENTICS Bâti mécano-soudé traité thermiquement – BAISON Télécommande sans fil Ordinateur sous interface Windows 11, Internet & WIFI Système centralisé de lubrification automatique Système d’extraction des fumées à turbine centrifuge Manuels d’utilisation, maintenance et programmation Stabilisateur et régulateur de tension Conforme aux normes CE Pourquoi choisir CNC Top Ten bv ? Isdpfxjvcbw Do Aa Uoar - CNC Top Ten bénéficie de plus de 50 ans d'expérience dans les machines CNC. - Nous possédons de nombreux centres de vente et de service en Europe de l’Ouest et de l’Est. - Notre équipe assure un service, une installation et une formation respectueux et maîtrisés dès le début. - Pour cette machine, installation et formation sur 2 semaines (non inclus dans le prix et calculé selon localisation client). - Machines pour coupe tubes et profilés. - La fibre laser, technologie "verte" d’avenir. - (Économies d'au moins 50% sur les coûts énergétiques) - Composants très fiables, entretien minimal - Jusqu’à 50% d’économie par pièce grâce à une production plus efficiente - Précision de coupe et finition de surface de haute qualité - Structure mécano-soudée très robuste - Composants de marques reconnues, durables et haut de gamme - En option : barrière immatérielle de sécurité - Entièrement conforme CE Vendeur officiel CNC Top Ten bv Coevorden, Pays-Bas

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Na prodaj je CNC laserski rezalni stroj proizvajalca TRUMPF. Moč laserja: približno 3000 W (3 kW), delovno območje: X/Y/Z 3000 mm/1500 mm/115 mm. Poleg tega je na voljo ustrezen Liftmaster iz leta 2015, ki ga je mogoče kupiti tudi ločeno. Ijdpfx Aaoxxa Ucj Ujar

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² Ijdpfxjxq Tbtj Aa Usar - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands