Vzmetni avtomat

WAFIOS FS 5

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, laserska moč: 10.000 W, dolžina mize: 4.000 mm, širina mize: 2.000 mm, delovna dolžina: 4.000 mm, delovna širina: 2.000 mm, Oprema: CE označba, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Naprodaj rabljen vlakenski laser Trumpf 5040, 10 kW, delovna površina 4 m x 2 m. Leto izdelave: 2019. Popolnoma opremljen z možnostjo aktivnega nadzora rezanja. Prodaja se brez avtomatizacije. Moč laserja: 10 kW / 10.000 W. Rezilna miza: 4 m x 2 m. Lrjdjylax Nepfx Al Rst

Stanje: zelo dobro (rabljeno), Leto izdelave: 1967, Equipment: 1 Gripper feed unit, right 1 Eccentric press, 90 kN 2 Narrow slide assemblies 3 Standard slide assemblies Working range: Wire diameter range: 0.5 – 3.5 mm Strip width: up to 32 mm Feed length: up to 170 mm Ledpfx Aljpq H Ups Rjrt Capacity: up to 250 cycles/min.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Overhauled, 12 months warranty, immediately available. Equipped with a safety system for solvent-containing substances according to DIN 1539, includes exhaust fan, supply air cage filter, as well as concentration monitoring and recirculating air filter wall inside the chamber. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Max. temperature: 300°C - Eurotherm Controller 2404 (20 programs with up to 16 segments each) - Eurotherm Recorder - Connected load: 29 kW - 6 grid shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent volume: 36 g at nominal temperature of 300°C - With concentration measurement - New window gaskets Ljdsvcb U Aepfx Al Rsrt - Own weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and supplied with DGUV test report Viewing available by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, warming cabinet, industrial oven, paint dryer, tempering oven, heating oven, chamber furnace, curing oven, recirculating air drying cabinet, recirculating oven, solvent oven, chamber recirculation oven

Stanje: rabljeno, Leto izdelave: 2010, x-travel 2,600 mm y-travel 700 mm z-travel 700 mm Control: SINUMERIK 840 D Siemens B-axis +/- 110 x 0.001° Lsdpfxey Tpk Ee Al Rort C-axis 360 x 0.001° Feed rate X/Y/Z axis: 1 - 20,000 mm/min Rapid traverse X/Y/Z: 40.00 m/min Spindle speeds - stepless: 20 - 8,000 rpm Tool holder: SK40 Drive power 100% duty cycle: 13.50 kW Drive power 25% duty cycle: 23.50 kW Torque at 100% duty cycle: 85.00 Nm Torque at 25% duty cycle: 150.00 Nm Table clamping surface: 2,920 x 740 mm Number of T-slots: 7 T-slot pitch: 100 mm T-slots: 1x 18H7 / 6x 18H12 Integrated rotary table: 750 mm Rotary table load capacity max.: 500 kg Tool magazine: 60 positions Tool diameter: 80.00 mm Tool diameter with 2 free positions: 130 mm Max. tool length: 300 mm Max. tool weight: 6.00 kg Total power requirement: 57 kW Machine weight approx.: 15.5 t Space requirements approx.: 10.50 x 6.60 x H2.70 m 5-axis simultaneous machining center with SIEMENS SINUMERIK 840D control, ShopMill operator interface, chip conveyor, coolant system, extraction, coolant through spindle, pendulum machining possible - partition, electronic handwheel, probe TS649, tool breakage detection Renishaw TRS2, tilting milling head (B-axis), NC rotary table (C-axis). Milling spindle replaced in 10/2019. Guideways and ball screws replaced in 01/2023.

Stanje: pripravljen za uporabo (rabljen), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Wafios RB20 bending head, bending direction: left and right, max. total tool height: 78 mm, bending capacity: 360 Nm, bending speed: 560°/s, bending radius: 57 mm, repeatability for bending, rotation and feed: +/-0.05 mm. 2) Kuka KR 16-2 KRC 2 robot, axes: 6, payload: 16 kg, max. reach: 1611 mm, repeatability: +/-0.05 mm, weight: approx. 235 kg. Includes overhead magazine, Kuka control cabinet, discharge conveyor, safety fence, mobile operator panel, docking station and work table. Documentation available. On-site inspection possible. Lrjdewwlkiepfx Al Rot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Nosilnost: maks. 1.500 kg. Območje debeline žice: 0,5 - 8,0 mm. Premer koluta: maks. 1.000 mm. Hitrost vrtenja: 0 - 80 vrt/min. Ledpjvck Huofx Al Rsrt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 15.845 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6E182501, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 22 W, Stroj je zelo dobro ohranjen, 90% proizvodnje v uporabi ene osebe. Servisiran po priporočilih proizvajalca. Lrodpfxeyvtuge Al Rot

Stanje: rabljeno, Leto izdelave: 2000, Višina konic 400 mm Razdalja med konicama 3.000 mm Maks. premer vrtenja nad ležiščem 810 mm Maks. premer vrtenja nad prečnim suportom 510 mm Maks. premer vrtenja v zarezi 850 mm Krmiljenje WEILER Maks. masa obdelovanca 3.800 kg Premer vretena v prednjem ležaju 150 mm Premer vretenine 106 mm Premer planske plošče 630 mm Orodni sistem Parat Konus pinole konjička MK 6 Premer pinole 115 mm Območje vrtljajev vretena 1 - 1.800 min⁻¹ Ciklično krmiljen stružni stroj WEILER E80 x 3000, opremljen s plansko ploščo premera 630 mm, 400 mm triodnimi čeljustmi SCHUNK ROTA-S plus, držalom za izvrtalne palice, orodnim sistemom PARAT in transportnim trakom za odrezke. V obsegu dobave je vključen obsežen paket orodja. Video stroja iz tovarniške lokacije vam z veseljem pošljemo na zahtevo. Stroj je v dobrem stanju. Za dodatne tehnične podatke glejte ponudbo. Lredpjy Ty Ihofx Al Rot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Oznake: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Stanje: novo, The CR 35 (up to Ø 3.5 mm) completes the range between the CR 23 (up to Ø 2.3 mm) and the CR 45 (up to Ø 4.5 mm). The machine is available with between 12 and 16 axes; below are the 12 standard axes: - Wire feed - Wire rotation - Nozzle rotation - One servo spinner - 8 independent slides (8 axes) Ljdpfx Aovbdq Rsl Rert Optional (up to 4 additional axes): - Servo cutter - Additional servo spinners - Lateral movement of the coiling finger - Transfer for lifting the second (German type) loop of extension springs Maximum feed speed: 54 m/min. Machine dimensions: 2.36 x 2.10 x 2.10 m. Machine weight: 2,300 kg. Please do not hesitate to contact us for any further questions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Grinding length 500 mm Grinding width 200 mm O F F E R Lrodpozbczrofx Al Ret We can offer you, subject to prior sale and errors excepted, the following from stock on a non-binding basis: JUNG Universal Horizontal Surface & Profile Grinding Machine Type HF 50 RD Year of manufacture 1978 _____ Max. grinding length: 500 mm Max. grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel approx.: 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Continuously variable grinding wheel speed: 1,000 - 4,000 rpm Vertical feed: 0.001 - 0.01 mm/stroke Infinitely adjustable grinding spindle drive: 0.5 to 1.5 kW Total power approx.: 4 kW - 380 V – 50 Hz Weight approx.: 2,000 kg Accessories / Special Features • Due to the infinitely adjustable grinding spindle speeds, this model is also suitable for grinding high-alloy tool steels. The grinding wheel diameter and peripheral speed are set directly on the converter cabinet. • Automatic cross-slide infeed for surface and profile grinding operations with • automatic infeed shut-off via contact dial gauge • Automatic work cycle: roughing, finishing, spark out, adjustable for all common grinding methods with and without auto infeed, with continuous cross feed or by table reversal, plunge and profile grinding without cross feed. • Rapid traverse for vertical movement of the grinding head, short stroke device, fine cross adjustment • Digital display for the Y-axis for precise positioning, especially for profile grinding. • Manual straight dresser mounted above the grinding wheel, separate radius dresser, (additional DIAFORM dressing device available for profile dressing) • Mounted sine permanent magnetic chuck 500 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and belt filter • Approx. 3 flanges with and without grinding wheels, balancing scale, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: HF50RD/4 Delivery: Ex stock, available immediately, FCA Metzingen Payment: strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please enquire for your needs!