Stroj za navijanje vzmeti

WAFIOS FUL8

Stanje: rabljeno, Technical details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Hsdsvc Aklopfx Agienk Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubrication unit: 830 x 650 x 1000 mm Machine dimensions approx. LxWxH: 3.3 x 1.5 x 1.45 m Control cabinet dimensions LxWxH: 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS RETROFITTED WITH NEW CONTROLS IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of tension and compression springs, as well as leg springs, in both right- and left-hand windings. Springs can be produced with any pitch and body shape. Performance: up to 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length: unlimited, speed = 27 - 80 m/min. Coiling unit: Two-finger system for wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Equipment: 5x feed rollers, wire take-up 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire spool holder POST, motor-driven, mandrel diameter Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit A wide range of accessories and/or spare parts available on request! Subject to prior sale.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Nosilnost: največ 1.500 kg Območje debeline žice: 0,5 - 8,0 mm Zunanji premer tuljave: največ 1.000 mm Notranji premer tuljave: najmanj 300 mm Število obratov: 0 - 80 obr/min Hsdpfxevam Iio Agionk

Stanje: dober (rabljeno), Leto izdelave: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunge spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-driven Feed rate: 20 – 500 mm/min Rapid traverse NC operation: 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Hsdpfsvca Rcjx Agionk Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided regarding the accuracy, completeness, or currency of the information given.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Hnsdpfx Aen E N Ndjgiok Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: novo, Leto izdelave: 2025, - TFON Sistem zaobljenja ivica i površinske dekontaminacije. - Kompatibilnost materijala: Pogodno za nisko-ugljenični čelik, aluminijum i nerđajući čelik. - Radni spektar debljine: Obrađuje materijale debljine od 0 do 120 mm. - Zaobljenje ivica: Obezbeđuje zaobljenje ivica radijusa 2, za glatke i sigurne ivice koje unapređuju izgled i funkcionalnost izratka. - Precizna kontrola: Opremljen Siemens automatskim sistemom za preciznu i doslednu kontrolu tokom celokupnog procesa. - Nezavisne stanice: Više procesnih stanica omogućava raznovrsne operacije – različiti zahvati mogu se izvoditi istovremeno ili uzastopno. - Opcije radne površine: Dostupne dimenzije radnih stolova: 650 mm, 1000 mm ili 1300 mm, u zavisnosti od potreba proizvodnje. - Tipovi stolova: Fleksibilne konfiguracije uključuju magnetne, vakuumske ili magnetno-vakuumske stolove, što omogućava sigurno fiksiranje raznih materijala i veličina delova. - Plazma i kiseonička tehnologija: Koristi naprednu plazma i kiseoničku tehnologiju za efikasno uklanjanje debelih strugotina i šljake nakon sečenja, omogućavajući čistiju i glatkiju površinu. - Površinska dekontaminacija: Efikasno uklanja površinske nečistoće kao što su rđa, oksid ili skala, pripremajući delove za dalje procese. - Zaobljenje ivica za potrebe zaštitnog premaza: Hnsdpshq A T Uefx Agisk Savršeno priprema površinu za farbanje i nanošenje zaštitnih premaza, obezbeđujući ravnomernu i besprekornu završnu obradu. - Industrijske primene: Idealan za centre za obradu čelika, energetiku, rudarstvo, građevinsku i automobilsku industriju – prilagođena rešenja za zahtevne primene. - Ujednačeni rezultati: Šest lamelnih točkova radi sinhronizovano, obezbeđujući konstantne, jednako zaobljene ivice na svakom delu. - Pneumatski sistem oscilovanja: Produžava vek trajanja brusnih traka minimiziranjem habanja i održavanjem stalnog kvaliteta obrade tokom vremena.

Leto izdelave: 1963, stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Hnedpfxeh I Edvs Agijk

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to a second machine Hnsdpjwykccsfx Agiek

Stanje: novo, Leto izdelave: 2026, Recirculation chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac (controller/recorder with color touch display) - 2 circulating air fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity: approx. 70 kW - Temperature accuracy: +/- 6 K in empty furnace Hnedpjv Hg Euefx Agisk - Documentation, CE declaration of conformity - Electrical wiring diagram with spare parts list Note: The furnace floor is not insulated, but only covered with stainless steel sheet, allowing unobstructed access with any track gauge. Optionally, the floor can be supplied insulated (with entry rails to be defined by the customer). We offer new and used industrial furnaces, which we can also retrofit and customize according to customer requirements. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculation oven, chamber oven, preheating oven, chamber recirculation oven, tempering oven, annealing oven.

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. Hnsdet Hw Shspfx Agijk 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Hnjdpsv Nhx Ujfx Agiek Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate