Avtomatski brizgalni stroj Venjakob VEN SPRAY Duo 2007

Venjakob VEN SPRAY Duo

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: A 00 12 006 / 0100, New, ASCOM pistol control, PLC, light curtain and touch panel, mounted at the infeed of the spray machine. - Manufacturer: Venjakob - Model: VEN SPRAY Duo - Retrofit 2026 (Year of manufacture 2000) - Working width: 1300 mm - Operator side: right - Price for refurbished machine - Current status: in refurbishment phase - Dual pistol drive system - Dry extraction - Exhaust air capacity: 10,000 m³/h - Extraction nozzle diameter: 500 mm - Belt conveyor system - Feed speed approx. 2 - 8 m/min - Equipped with belt cleaning system - Paint recovery via V-belt system - Pistol control, touch screen - Installed paint circuits: 1 unit - Supply air filter ceiling Csdjx Ihvpopfx Afdsgw - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated in the machine - Total connected load: approx. 19 kW - Length: 6,066 mm - Width: 3,450 mm - Height: 2,330 + 440 mm - Voltage / Frequency: 400 V / 50 Hz - Colour: Light grey RAL 7035 and black - Location: in stock - Voltage fluctuations max. +/- 5% The images only show an example of a refurbished spray machine. _____ Optionally, we can also offer installation and commissioning of the system, as well as operator training. Upon request, we also provide regular maintenance and servicing of the machine. If you need further information, please feel free to contact us!

Stanje: novo, Glazing Bead Nailer “2 P Jumbo automatic E.C.” – new – Your Benefits: - Corner joints are fully closed - No open glazing bead joints - No color mismatches when painting - Glazing bead frames easy to allocate Corner Stapling Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; Equipped with angle stop, top and front clamping device. Pressure can be adjusted separately. Insertion of parallel and stacked staples possible via electronic program control. Stapler unit can be mounted on a suitable work table, Operated via foot pedal. ----- Price for this configuration on request! Plus statutory VAT and packaging/shipping costs ----- Images show the 2P Corner Stapling Machine with the optional mobile work table (see surcharge details below) Surcharges: ----- Mobile Work Table: Cgodpfx Asvnh T Njfdew Height adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 pivoting and sliding support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking device. ----- Surcharge: 1,311.00 EUR net Staples: Packages 15 mm staples (pack of 2000): Price 22.00 EUR 12 mm staples (pack of 3000): Price 32.00 EUR 10 mm staples (pack of 3000): Price 32.00 EUR Dimensions and Weights ----- Jumbo Automatic E.C: 470 x 370 x 300 mm, 35 kg Work table: 32 kg All prices are net, plus VAT. Ex-works, plus packaging and shipping. (Technical data as per manufacturer – without obligation!)

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding Cjdpfofyadbsx Afdogw • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Machining center Unirex 3000 Cedsh H Iyxepfx Afdsgw Univar 15 Unitex 15

Stanje: novo, Leto izdelave: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Codpfshpmawex Afdegw Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Stanje: novo, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting operations - Double-sided mitre adjustment (60° / 45°) with fixed stops - One-sided compound cut up to 45°, with fixed stop - Robust cast iron construction - Precision linear ball bearing guide for the tool carriage on hardened and ground steel shafts Cgedpfx Aexabqzefdjw - Manual saw feed - Saw blade height infinitely adjustable - Port for optional dust extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x TCT circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastic - Hydraulic feed brake, infinitely adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Število motorjev: 1 kos Delovna dolžina: 2500 mm Krmiljenje: ne Enostranska žaga za zasteklitvene letve Hecht ES 350 ----- Zasuk pnevmatsko proti fiksnim omejevalcem. 45º/90º/135º s pnevmatskim pomikom žaginega lista pnevmatsko nihanje preko ročnega omejevalca z nogo stroja, pnevmatska pritrditev Žagin list HM 350 x 3,0/2,2/30 Z 100 Mere stojala za žago: dolžina 700 mm, globina 1.600 mm, višina 1.500 mm Dotikalni omejevalec 1,5 m Oporna površina 1,5 m z nosilcem Dotikalni omejevalec 3 m Podaljšek oporne površine z 1,5 m na 3 m z nosilcem Vložki v mizo z utori za prekrivne zasteklitvene letve Csdjvpr N Repfx Afdjgw HECHT ASB ročni dolžinski omejevalec z digitalnim prikazovalnikom, 2500 mm Z odsesovalno napravo (Tehnični podatki po navedbah proizvajalca – brez jamstva!)

Stanje: novo, Working length: 2451 mm Working width: 2170 mm Working height: 800–1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800–1000 mm) - Conveyor system for timber lengths from 300 mm to 4200 mm - Conveyor system for timber widths up to 240 mm Roller Conveyor – Infeed - Continuously variable driven roller conveyor approx. 5–25 m/min Cgedpfx Aoi Hmpijfdjw - Drive via gear motor 0.37 kW, drive shaft and PU round belt - Roller diameter 50 mm, 240 mm roller length with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller cover according to HBG Cross Conveyor - Cross conveyor with 6 traverses - Conveyor belts, PVC-coated (green), 50 mm wide, guided in plastic tracks - Continuously variable driven cross conveyor approx. 5–20 m/min - Drive via gear motor 0.37 kW - Approx. 1,750 mm from stop to stop Roller Conveyor – Outfeed - Continuously variable driven roller conveyor approx. 5–25 m/min - Drive via gear motor 0.37 kW, drive shaft and PU round belt - Roller diameter 50 mm, 240 mm roller length with PVC coating - Transfer to cross conveyor by raising/lowering the roller conveyor - Roller cover according to HBG ----- Belt Conveyor approx. 320 mm x 3,500 mm Base Frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800–1000 mm) - Belt conveyor for timber lengths from 300 mm to 4200 mm - Belt conveyor for timber widths up to 240 mm - Belt conveyor on caster wheels with brake Conveyor Belt - Continuously variable drive approx. 5–25 m/min - Drive via gear motor 0.37 kW - Belt PVC-coated, 260 mm wide - Stop on both sides approx. 15 mm ----- Control System: - Ready to plug in with own control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency stop loop - Completely installed with 16A Euro plug - Connection: 400 V AC, 2 kW, 50 Hz ----- Pneumatics: 6–8 bar, consumption approx. 16 NL/min Color: RAL 7035 light grey Basic EU directive 2006/42/EC in accordance with 2006/95/EC Electrical Equipment (Low Voltage Directive) as well as 2004/108/EC EMC Directive ----- Price for the above-mentioned version ex-works: on request! plus packaging and shipping costs ----- (Technical specifications according to manufacturer, no guarantee!)

Stanje: zelo dobro (rabljeno), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center featuring comprehensive equipment and outstanding condition — Csdjxk Tumjpfx Afdsgw Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Working area X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal machining • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix table or console table • Options: Edge banding and labeling — Key Features • High dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is immediately available. Disassembly and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to prior sale and errors.

Stanje: rabljeno, Leto izdelave: 2005, moč: 7,5 kW (10,20 KM), največja višina reza: 170 mm, največja širina rezanja: 1.100 mm, premer žaginega lista: 500 mm, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: hidravlični, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 5.500 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna masa: 1.500 kg, Oprema: CE označba, No. 04528 Sliding Table Panel Saw Martin T 73 BASIC Used, Year of Manufacture: 2005 Sliding table: 3000 mm Maximum cutting height: 170 mm Codpfx Asyymtdefdegw Maximum saw blade diameter: 500 mm Saw blade bore: 30 mm Cutting width: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Hydraulic saw blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle settings Length stop extendable up to 3300 mm Sliding table with infinitely variable locking Integrated contact for extraction system activation Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (LxWxH) Weight approx. 1500 kg To avoid possible misunderstandings, on-site inspection after prior arrangement is possible and recommended. Sale in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: 'sold as seen.' Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock.