Stiskalnica za pohištveni okvir vrat (posebne velikosti)

V. Grum-Schwensen MTP

Stanje: rabljeno, Leto izdelave: 2000, For fully automatic assembly of frame components. Fgodpfx Apsd H Irfslob Frame external dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm 2 heating rails

Stanje: nepreverjeno (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau (Kunststofffensterfertigung) der Marke URBAN, bestehend aus: Fgedpfoucl Dcex Apleb 1. Zwei-Kopf-Schweißautomat; Hersteller: URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, in einwandfreiem Betriebszustand. 2. Nutfräsmaschine; Hersteller: URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, in einwandfreiem Betriebszustand. 3. Zweikopf-Gehrungssäge; Hersteller: RAPID, Modell: DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird zusammen mit Spänesauger mit Filtersäcken verkauft, in einwandfreiem Betriebszustand. 4. Armierungssäge (Stahltrennsägemaschine); Hersteller: MACC, Modell: NEW 275, Seriennummer: 88266, Baujahr: 2008, in einwandfreiem Betriebszustand. 5. Kopierfräse (Pantograph); Hersteller: URBAN, Modell: MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, in einwandfreiem Betriebszustand. 6. Ständerfräse; Hersteller: URBAN, Modell: M7CRH-100149891, Seriennummer: 559, Baujahr: 2008, in einwandfreiem Betriebszustand. 7. Entgratmaschine mit 2 Fräsaggregaten; Hersteller: URBAN, Modell: SV 280, Seriennummer: 29342, Baujahr: 2008, in einwandfreiem Betriebszustand. 8. Glasleisten-Säge; Hersteller: URBAN, Modell: GLS 102; Seriennummer: 102015; Baujahr: 2010, in einwandfreiem Betriebszustand. Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8 h (abhängig von der Anzahl der Bedienpersonen). Die Linie wurde von 2010 bis 2014 nur sehr wenig und nicht annähernd mit voller Kapazität genutzt. Einzelmaschinenverkauf auf Anfrage möglich. Nettopreis für die komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea.

Stanje: rabljeno, Leto izdelave: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm Table clamping surface 2550 x 800 mm Spindle taper SK 50 Control HEIDENHAIN, TNC 150 B Machine weight approx. 16 t Fgsdpfetqqnwjx Apljb

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via frequency inverter Memory system Pneumatic pressure units divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber feed rollers 1 roller on the table driven by cardan shaft Infeed table length: 1,980 mm Working tables made with Marathon Coating technology CE certificate Fgsdjthk T Iopfx Aplsb Suction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Fedsfg Rlcopfx Aplogb Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers Fgodpfsd S Uf Sjx Aplsb With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: rabljeno, prevoženi kilometri: 835.837 km, moč: 309 kW (420,12 KM), prva registracija: 11/2010, vrsta goriva: dizel, lastna masa: 9.580 kg, največja dovoljena obremenitev: 16.420 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.480 mm, Leto izdelave: 2010, gradbena višina: 3.850 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile, pre-owned truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a robust diesel engine delivering 309 kW (420 hp) and meeting Euro 5 emission standards. Equipped with an automatic transmission and a steerable/liftable axle, the STRALIS offers excellent maneuverability and versatile operation. The vehicle features a distinctive yellow metallic paint finish. With an overall height of 3,850 mm, width of 2,550 mm, and length of 9,480 mm, it is designed for heavy-duty transport and has a permissible total weight of 26,000 kg. The specification includes two doors and two seats, air conditioning, and an INTARDER braking system for additional safety. The truck is registered as a commercial vehicle and has a green emissions badge (Euro 4), allowing access to low-emission zones. With only one previous owner and regular maintenance, the STRALIS is ready for high-performance applications. Steerable/lift axle Fjdpor Uzgcefx Aplogb Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm Fedehlp D Nspfx Aplogb - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: rabljeno, Leto izdelave: 2025, obratovalne ure: 57 h, Barva: Siva Teža: 11.600 kg Cena: Na zahtevo - Leto izdelave: 2025 - Dokumentacija na voljo: Da - CE označba prisotna: Da - CE certifikat prisoten: Da - Serijska številka: 24111638 - Obratovalne ure: 57 - Smer žaganja: Horizontalna - Moč glavnega motorja [kW]: 30.0 - Največja višina reza [mm]: 940 - Dolžina mize [mm]: 6000 - Širina mize [mm]: 1050 - Varovalka [A]: 100 - Skupna moč [kW]: 51.0 - Transportna teža [kg]: 11600kg Finančne informacije Fgedpfxox Npwws Aplsb DDV: Navedena cena je brez DDV DDV/obdavčitev razlike: DDV je odbitni za podjetja Dostava in odkup možna kadarkoli za vso industrijsko opremo Yorick Diebels