Varjenje obračanje naprava vrtljiva

Uniweld PT-DTS750

Stanje: novo, Leto izdelave: 2024, pomik osi Y: 600 mm, pomik po osi Z: 450 mm, - Simple graphical programming, including GoTo function in manual mode - Machining lengths from 3,000 to 16,500 mm, depending on configuration - Free programming in DIN/ISO (G-codes) - 2-axis interpolation for X/Y axes, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min, Y-axis = 25 m/min Main spindle BT 40 - 5-fold bearing support, diameter 110/60 mm (3x angular contact ball bearing 7212, 2x deep groove ball bearing 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length: 290 mm Cpedpferb Afaex Afxou - Maximum tool diameter: 88 mm X-axis guide - 2 units of 45 mm linear guides, each with 2 full-ball carriages X-axis drive - Helical precision rack, travel length 3,000 to 16,500 mm Y-axis guide - 2 units of 35 mm linear guides, each with 2 full-ball carriages Y-axis drive - Ball screw, 25 mm diameter, travel length 600 mm Z-axis guide - 2 units of 35 mm linear guides, each with 2 full-ball carriages Z-axis drive - Ball screw, 32 mm diameter, travel length 450 mm Standard configuration Automatic tool changer with 10 positions, mounted in the machine column

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Cpodpfxou Aa I Ss Afxju Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Cpodpfx Afjgvkktjxju Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control - Very high stability – compact model - Through-hole in the turntable - CE marking

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced CNC-controlled notching and cutting system is designed for the fast thermal cutting and notching of H, U, L profiles, flat bars, and square tubes. The steel profile is positioned precisely at the cutting location within the system by a pulling clamping measuring carriage via the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected positions. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: The Ficep profile beam notching system Flex FRC 1201 is equipped for thermal cutting using both oxy-fuel and/or plasma technology. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used. Thicker materials or bevel cuts greater than 32 mm are processed with the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain drag cross transporter with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported into the machine on a robust roller conveyor using a clamping measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a conveyor width of 1,300 mm on both the infeed and outfeed sides. For the removal of finished components on the outfeed side, there are four chain drag cross transporters, each with a length of 6,450 mm, following the notching system. Cedpfx Afotwm Ubsxepu Mitrol CNC Control and Pegaso Software: The system is operated via a modern CNC control unit from Mitrol. The reliable CNC controller is manufactured by Ficep’s own supplier Mitrol and features Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit The extraction filter unit for dust removal is supplied by Donaldson Torit DCE. Safety: Provided by fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Cpjdjxcyz Repfx Afxou Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Takoj na voljo iz zaloge.

Leto izdelave: 2000, obratovalne ure: 50 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 10.000 mm, glavna hitrost dviga: 6.300 mm/min, Double Girder Crab 16/4t, 2 units available Consisting of: Main Hoist 16t with mechanical micro speed Type: AS6040-25 4/1 L2 Reeving: 4/1 Lifting speeds: 6.3 / 0.63 m/min Lifting height: 10 m FEM 3M Cpodpfx Asrbyqkjfxou Double hook block Auxiliary Hoist 4t Type: SH5020-25 2/1 Reeving: 2/1 Lifting speeds: 12.5 / 2 m/min Lifting height: 12 m FEM 2M Single hook block Excellent condition, barely used, including load spectrum memory and load summation, with bottom block, electrics 400/230V, crab track gauge 1400mm, crab travel speed 20/5 m/min

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), 603 LBH Technische Beschreibung Haupttechnische Daten • Minimale Sägeleistung bei 90° min. mm 60 x 10 max. mm 610 x 310 • Sägeleistung bei 45° mm 400 x 310 • Sägeleistung bei 60° (nur an zwei Flanschen mit entsprechendem Zubehör verfügbar) mm 250 x 250 • Gehrungswinkel Codpel Si Uujfx Afxopu +45° / -60° • Sägebandabmessung mm 34 x 1,1 • Sägebandgeschwindigkeit m/min 78 • Bandmotorleistung kW 4 • Arbeitshöhe mm 850

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Cjdsf Ep Diepfx Afxjpu Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: kot nova (razstavni stroj), Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3000 kg Handheld remote control with digital display Double foot pedal control Height approx. min. 700 mm tilted to center, max. height 1400 mm Faceplate diameter: 1400 mm Tilt angle min. 135° Codjfxpggspfx Afxjpu Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW

Stanje: novo, Table diameter: 900 mm Table load capacity: 1 t Swivel range: 0–135 degrees Cjdpfxsgvkiks Afxepu Eccentricity: 200 mm Table rotation speed: 0.12 – 1.2 rpm Torque: 2000 Nm Total power requirement: 0.75 kW Space requirement approx. 1.5 x 1.02 x 0.9 m The D-HB series rotary tilt tables feature a heavy-duty design for exceptional stability, making them particularly suitable for heavy and precise positioning tasks as well as rotary welding operations. Features: - Easy installation - Increased productivity - Improved weld quality due to optimal positioning and speed control - Reduced crane hours and handling times while enhancing workplace safety - Self-locking gearbox prevents overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled turntable speed - High stability through robust construction - CE certification - The D-HB series includes a remote control with foot pedal for left-right / start-stop operations.