Orodje za prebijanje 10,5 x 23,5 mm

unbekannt für U Profil

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. Kjdpfx Asfxyhfof Tjdg The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 186.419 km, vrsta goriva: dizel, barva: rdeča, prva registracija: 03/2007, tip droga: teleskopski, Leto izdelave: 2007, Technical information Number of cylinders: 6 Engine displacement: 9,186 cc Drive: Wheel Dimensions Dimensions (L x W): 1,345 x 260 cm Weights Unladen weight: 35,750 kg Payload: 250 kg Gross vehicle weight: 36,000 kg Functional Superstructure make: SPIERINGS SK377-AT3 CE marking: yes Condition Technical condition: very good Visual condition: very good Financial information Price: On request SPIERINGS SK377-AT3 TOWER CRANE CHASSIS: EURO 4 6x4 drive Manual gearbox 186,419 kilometres 85 km/h Ksdeuxulwopfx Af Tedg Total 3 axles DAF engine 360 hp 365 kW Tyres: 445/75 R 22.5 Camera Central lubrication system UPPER STRUCTURE: Operating hours: 15,000 Max. lifting capacity: 7,500 kg at 10.4 metres Max. lift at 33 metres: 1,900 kg Horizontal working height: 19.8 metres Max. working height: 36 m at 30° Tower height: 22 metres 4x outrigger pads Camera on the mast Central lubrication system Radio remote control Full counterweight All available books, documents and certificates Dutch crane immediately available. Follow us on Instagram: GeurtsTrucks We speak German We speak English Hablamos español

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vise – angle adjustable: 90° - 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW Kedpfopug D Esx Af Tsdg - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Space requirement approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg

Stanje: dober (rabljeno), Leto izdelave: 1969, Pneumatic gluing press, Max. pressure: 10 bar, Heated gluing beams, Bonding area: 550 x 40 mm Continuously variable temperature setting for lower and upper gluing beam from 0 to 300°C, Ksdpjd Dxqbjfx Af Tsdg Continuously adjustable bonding hold time, Drive power: 5 kW, 380 Volt-50 Hz, Two-hand control by SIEMENS. Pressure build-up via toggle lever, Max. opening stroke approx. 30 mm

Stanje: dober (rabljeno), Plasma cutting unit, plasma cutter - Equipment: without torch package - Cooling: water-cooled Kdodpfx Aob A Innjf Tjg - Maximum cutting current: 70 A - Mains voltage: 3x400V

Stanje: dober (rabljeno), Leto izdelave: 1995, Offer 24315 Kdodpot Stfhofx Af Teg Technical Data: - Belt dimension: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm - Support vice – angle adjustable: 90° - 30° - Fine adjustment of support via handwheels - Belt speed: 30 m/sec - Contact wheel / grinding roller diameter: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Required space: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. diameters: 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Leto izdelave: 1983, Stanje: rabljeno, številka stroja/vozila: 1727, HM blade diameter: 300 mm Maximum cutting depth: 100 mm Blade rotation speed: approx. 4000 rpm Drive motor: 380 V, 2.2 kW Space requirement: 350 x 600 x 400 mm Kdedpfsbpfpnox Af Tsg Weight: approx. 30 kg with trolley undercarriage, designed for movement on a rail track

Stanje: rabljeno, Flat steel bender Glaser HAWE HC4L/3.0, hydraulic – see pictures Kedsu Da Afopfx Af Tsdg

Stanje: rabljeno, Plate width: 6400 mm Plate depth: 1870 mm Plate height: 400 mm Number of T-slots: 6 Edge distance: 130 mm Kdodpfx Afjgrm Ngs Tog T-slot size: 36 mm T-slot spacing: 280 mm

Stanje: dober (rabljeno), Thread cutting machine with steel jaws, thread cutting head - Chuck diameter: 190 mm - Size: 1/2 – 2 inches - Weight: 130 kg Kdodpeb A Ncuefx Af Tsg