Aluminijasta krožna žaga

BERG & SCHMID Alujet 351

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Operating voltage 380 V Hedpfx Agjg Ip Efo Tsi Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Hjdpfefxyhfsx Ag Tsi Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Max. sheet thickness, aluminium: 10 mm Operating hours: NC The machine has been regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Hsdpeuthz Tefx Ag Tsi Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure regulation - APC capacitive height control and process regulation - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensor technology - Automatic outer sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT colour screen - Electrical equipment: voltage 400 V / 50 Hz - Paint finish: standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000, including lens monitoring sensor technology - PCS Process Control System

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Inclination: 7°, compressed air connection: 6.5 bar, connected load: 8.5 kW, length: 4170 mm, width: 2990 mm, height: 3330 mm, weight: 2.8 t, including documentation. Hodpfxoibiivs Ag Tji

Stanje: novo, Tubend aluminium circular saw / under-table saw AC 550 Special equipment included in the price: - Pneumatic vertical and horizontal clamping via 4 clamping jaws - Infinitely variable saw blade feed - Minimum quantity lubrication system - 3m roller conveyor Description: Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting capacity at 90° (rectangular): 260 x 200 mm Cutting capacity at 90° (square): 155 x 155 mm Hsdpfx Agjkckx Us Toi Cutting capacity at 45° (rectangular): 180 x 200 mm Cutting capacity at 45° (square): 130 x 130 mm Operating pressure: 6 – 8 bar Operating voltage: 380 V Total power requirement: 3 kW Machine weight: approx. 250 kg

Leto izdelave: 2004, Stanje: dober (rabljeno), številka stroja/vozila: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Support vise – angle adjustable: 90° - 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: Ø 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Space requirement approx.: W 800 x H approx. 1000 x D 1300 mm - Weight approx.: 250 kg Hjdpspug D Eefx Ag Tei

Stanje: dober (rabljeno), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 Hsdpfx Ajuqlc Nog Toi • Year of manufacture – 2001 • Belt dimension – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price on request

Stanje: rabljeno, Leto izdelave: 2011, Domet 2500 mm Skupna višina stebra 3100 mm Nosilnost 125 kg Hjdpfsvrk Ahex Ag Toi Območje vrtenja 270 stopinj Gradbena višina nad tlemi 3254 mm Teža 945 kg Stolpno vrtljiva dvigalka ABUS SV z zalogovnikom verige in električnim verižnim dvigalom ABUS, na voljo revizijska knjiga. Dvigalo je razstavljeno in pripravljeno za odpremo – glejte zadnjo fotografijo. Gre za rabljeno stolpno vrtljivo dvigalo, zato prodajamo brez kakršnega koli jamstva. TRGOVEC Z LASTNIM SKLADIŠČEM V VELIKOSTI 1600 m².

Stanje: dober (rabljeno), Leto izdelave: 2003, Washing height: 1250 mm / Open at the top, 4 brushes / Water tank, pumps, 7.5 kW / Blower cabinet for drying zone, Direction of travel: Right to left, Total length: 6450 mm, Height: 2100 mm, Depth of washing machine: 1300 mm, Width: 1700 mm, Dimensions for blower cabinet: Height: 1100 mm, Hodpfx Aot Ah Npog Tsi Length: 700 mm, Width: 700 mm

Stanje: dober (rabljeno), Aluminium chop saw, aluminum circular saw, semi-automatic aluminum circular saw, mitre saw, glazing bead saw, metal chop saw, compound mitre saw, aluminum-metal circular saw, light metal circular saw. Hjdpfx Ager A H R Ts Tei - Manufacturer: Berg & Schmidt, Alu-Metallkreissäge Velox 350 with heavy-duty base frame - Saw blade: Ø 350 mm / 1400/2800 rpm - Cutting height: 100 mm - Cutting width: 170 mm - Double mitre: 45° - Drive: 1.3 / 1.7 kW - Double clamping device: pneumatic - Dimensions: 890 x 600 x H1670 mm - Weight: 198 kg