Prehod stroja s podestom / mostom...

Unbekannt 4570-880-2600

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top Kdjdst Hw Shopfx Ai Nop of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), 13 straightening rolls, Ø 150 mm Strip width: 600 – 2,000 mm Kdedpfjv S Ad Dex Ai Nep Strip thickness: 6 – 15 mm Design: 4-Hi cassette

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Kjdpfxohlp Efj Ai Nodp

Stanje: novo, Leto izdelave: 2023, Power (kVA): 650 Kjdpfx Aiowpgh He Njdp

Stanje: zelo dobro (rabljeno), stiskalna sila: 150 t, širina mize: 3.100 mm, Zum Verkauf steht: 1 gebrauchtes, hochwertiges und sehr gut erhaltenes Bystronic Xpert CNC-Abkantpresse 3 Meter x 150 Tonnen mit motorischer Blechauflage. Bystronic Beyeler Xpert 150×3100 Kodpfx Asttl D Nsi Nsdp Hersteller: Bystronic Modell: Xpert150 Baujahr: 2010 Achsen insgesamt: 9 – Hinteranschlag 6-achsig: X1, X2, R1, R2, Z1, Z2 – sowie motorische vordere Blechaufrichtehilfe Hydraulische Werkzeugklemmung Freistehend, keine Unterflur-Grube erforderlich Kapazität / Biegelänge / Presskraft: 3 Meter x 3100 mm x 150 Tonnen Komplett gewartet durch Bystronic UK Allgemeine Informationen: Modell: XPERT150x3100 Baujahr: 2010 Technische Daten: Arbeitslänge: 3100 mm Presskraft: 1.500 kN Hub: 315 mm Eilgang: 190 mm/s Arbeitsvorschub: 10 mm/s Rücklaufgeschwindigkeit: 150 mm/s

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Kjdpsxq Tbtjfx Ai Njdp Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Stanje: novo, Cefla sistem za lakiranje Kdodpfx Aiewhbrwe Nep

Leto izdelave: 2020, stanje: novo, Ultrasonic cleaning machines for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to minimize heat loss and enable faster heating. Premium materials ensure a long service life for the vibrating components. Kdodofzk Ewepfx Ai Nop Heating System The heating elements installed in ROMER tanks are made from top-quality materials and high-temperature-resistant ceramic components. The implemented heating system provides a high thermal efficiency; hot water automatically mixes with cold water, ensuring the entire tank is evenly heated. Ultrasonic Transducers The ultrasonic transducers used in ROMER systems are mounted in submersible modules, which enhance vibration transmission and are easily replaceable. The ultrasonic frequency range is 20–40 kHz, depending on the parts being cleaned—lower frequencies are used for large, high-strength components, while higher frequencies are used for jewelry, delicate mechanical assemblies, etc. All transducers are connected with high-temperature-resistant cables.

Stanje: novo, Za delovanje generatorja dušika je potreben dodaten kompresor zraka. Čistost dušika: 99,999 % Vhodni tlak: 8 bar Izhodni tlak: 7 bar Moč: 75 W (strošek na uro za proizvodnjo dušika) 3-v-1 zasnova, brez potrebe po dodatnem kompresorju, hladilniku ali sušilcu zraka Plin je čist Kedexfrv Ejpfx Ai Nodp Cena je EXW (skladišče Evropa), vključno z nakladanjem na tovornjak. Prevoz, montaža, zagon, usposabljanje in letne servisne pogodbe so na voljo po dogovoru za doplačilo. Namestitev in usposabljanje vedno izvaja naša visoko usposobljena servisna ekipa na treh lokacijah v Evropi: Nizozemska, Nemčija, Romunija. Uradni prodajalec CNC Top Ten bv Coevorden, Nizozemska

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Hydraulic press for die testing and adjustment Brand: MHG Model: ER.2S.DM-300/2100 Serial no.: 927 Year: 2020 Required power: 40 kW Hydraulic oil: 1000 l reservoir + 200 l circuit fill Total number of cycles: 403 (AS-NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300 t Number of cylinders: 3 Maximum tooling dimensions: 1400 x 1400 mm Maximum tooling mass: 16,000 kg Maximum opening between fixed and moving tables: 1690 mm Ksdpfx Ask Sgvyoi Njdp Minimum opening between fixed and moving tables: 960 mm Maximum stroke of moving table: 730 mm Approach speed: 92 mm/s Return speed: 93 mm/s Stop time: 0.2 s Safety distance: 500 mm Weight (empty tank): 35,000 kg