Laser rezalni stroj

TRUMPF Trumatic TC 6000 L-1300

Stanje: zelo dobro (rabljeno), Trumpf We are offering a laser and punching machine. Technical specifications: Power supply: 400V/50 Hz Protection: 3 x 100 A Connected load: 65 kVA Working area X x Y without repositioning Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (incl. 20 kN active stripper): 220 kN Active stripper (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum pass-through height: In punching mode: 35 mm In laser mode: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous strokes: Punching: 900 /min Marking: 2800 /min C-axis: Punching: 60 rpm Nedpfxem Ak Huj Aacocn Thread forming: 330 rpm Tools Tool stations in linear magazine: 19 (with 2 clamps) Number of tools with multitool use: 19 to 190 tools All tools can rotate 360° continuously Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm at all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Position deviation: ± 0.1 mm Mean position scatter: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Specifications, technical data, and information subject to change and error!) We are happy to answer further questions by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Pressing force: 50.0 t Bending length: 2,090 mm Frame gap: 1,665 mm Throat depth: 400 mm Table width: 60.0 mm Approach speed: 100 mm/sec Nsdpsxabutefx Aacjcn Working speed: 10.0 mm/sec Return speed: 92.0 mm/sec Stroke: 200 mm Table height: 910 mm Installation height: 470 mm Operating hours: 36,160 h Total power requirement: 6.0 kW Machine weight approx. 4,850 kg Dimensions (L x W x H): 3,458 x 2,450 x 2,450 mm with only approx. 36,160 operating hours (!!) - in tested condition - machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control unit type OPERATEUR 2, 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X axis) * CNC-controlled vertical adjustment of the gauge fingers (R1+R2) * CNC-controlled left-right adjustment of the gauge fingers (Z1+Z2) * Handheld control device for manual axis movement * Swiveling operator panel, front left - AMADA/PROMECAM upper tool quick-clamping system * 1x segmented set of offset upper tools (UKB 10.512) - AMADA/PROMECAM lower tool holder * 1x segmented set of 1-V dies (UKB 20.810) - Side safety guards (pivoting doors) - Rear safety guard (pivoting door) - CE marking - 1x mobile double foot switch - Operating manual (PDF)

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Njdped Ixadsfx Aacscn Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New Ncodenah Tajpfx Aacon The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Nodpfx Aaow Iq Ugjcocn Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding Ncsdpfet Hw Shjx Aacen on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Pressure: 80.0 t Bending length: 2550 mm Frame width: 2130 mm Throat depth: 420 mm Approach speed: 100 mm/sec Working speed: 10.0 mm/sec Return speed: 80.0 mm/sec Stroke: 200 mm Installation height: 470 mm Table width: 60.0 mm Table height: 910 mm Operating hours: approx. 37,102 h Total power requirement: 9.0 kW Machine weight: approx. 5,750 kg Dimensions (L x W x H): 3100 x 2180 x 2540 mm Good / well-maintained condition (!!) Njdpfxsxabnys Aacjcn - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - CNC OPERATEUR controller for 8 axes: X1+X2, Y1+Y2, R1+R2, Z1+Z2 - CNC-controlled backgauge adjustment (X axes) - CNC-controlled vertical adjustment of backgauge fingers (R axes) - CNC-controlled left-right adjustment of backgauge fingers (Z axes) - Mobile two-hand operation & foot pedal - AMADA-type upper die crowning - Various tooling included - CE marking - Side safety guards (hinged doors) - Rear safety guard (hinged door) - 2x emergency-stop buttons on front - Operating manual

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Največja rezalna sila: 220kN, moč laserja: 3200W, priključek za dušik: 30bar, priključek za kisik: 20bar, priključna moč: 76kVA, obratovalne ure začetkom leta 2025: 67.766h, z laserjem Trumpf TLF 3200 in hladilnikom RIEDEL L 15/21 TR3/19.00, hladilno sredstvo: R134a, napolnjena količina: 11,5kg, visok tlak: 20,2bar. Orodja dodatno na voljo. Ogled na lokaciji možen. Ncodpfew Uk A Rex Aacon

Stanje: zelo dobro (rabljeno), stiskalna sila: 150 t, širina mize: 3.100 mm, Zum Verkauf steht: 1 gebrauchtes, hochwertiges und sehr gut erhaltenes Bystronic Xpert CNC-Abkantpresse 3 Meter x 150 Tonnen mit motorischer Blechauflage. Bystronic Beyeler Xpert 150×3100 Hersteller: Bystronic Modell: Xpert150 Baujahr: 2010 Achsen insgesamt: 9 – Hinteranschlag 6-achsig: X1, X2, R1, R2, Z1, Z2 – sowie motorische vordere Blechaufrichtehilfe Hydraulische Werkzeugklemmung Freistehend, keine Unterflur-Grube erforderlich Kapazität / Biegelänge / Presskraft: 3 Meter x 3100 mm x 150 Tonnen Komplett gewartet durch Bystronic UK Ncsdpfx Aajttl D Nscen Allgemeine Informationen: Modell: XPERT150x3100 Baujahr: 2010 Technische Daten: Arbeitslänge: 3100 mm Presskraft: 1.500 kN Hub: 315 mm Eilgang: 190 mm/s Arbeitsvorschub: 10 mm/s Rücklaufgeschwindigkeit: 150 mm/s

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. Ncsdponah Tdsfx Aacen The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or *