Avtomatska stružnica

Traub TNL20

Stanje: rabljeno, New diesel generator set, power generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated output: 50 kVA Kdedpfexlkq Usx Af Teg Continuous output: max. 40 kVA Standby power: 55 kVA / 44 kW Rated current: 33 amps Voltage: 400/230 volts, 50 Hz    230 volts, 50 Hz Fuel tank capacity: 99 liters – provides an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby: approx. 4 liters/hour Drive engine: 4-cylinder inline diesel engine RICARDO ZH4105ZD Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple, compact construction with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminals for cable power connection for external consumers, e.g. site distribution boxes - ATS module for mains backup operation, enabling automatic emergency power switchover in the event of mains failure Space requirement (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg Brand new machine from stock

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Kdsdpfx Aevivx Nef Tsg Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar loader Fanuc 31iB - 5646 hours Country of manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Max bar diameter: 16 mm Max machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Max bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of stations: 5 Number of driven stations: 3 Driven tool speed: 8,000 rpm Tool set 2 Number of stations: 5 Number of powered stations: 3 Driven tool speed: 8,000 rpm End unit Kodpfekhnqgsx Af Tjdg Number of stations: 4 Number of powered stations: 3 Driven tool speed: 8,000 rpm Counter operations Number of stations: 6 Number of driven stations: 6 Driven tool speed: 8,000 rpm Electrical supply Mains voltage: 400V All technical data is provided without obligation and is subject to errors or prior sale.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: Kedpfsuxfucjx Af Tjdg The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: dober (rabljeno), Leto izdelave: 2004, Ref. No.: Lg 34522 High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) including - Infinitely variable drive Kdsdpfxsip Uqme Af Tog - 2-connecting rod drive mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Oil circulation lubrication Technical Data Max. press force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Clearance between uprights: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roller feeder VAMCO SP 150 Year of manufacture: 2014 Feed width: max. 150 mm Material thickness: max. 3.0 mm

Stanje: rabljeno, Leto izdelave: 2017, Absolutely as new Comprising 1 pc. measuring case 12-20mm Ksdpfjvvxvdsx Af Tedg Comprising 1 pc. measuring case 20-50mm Comprising 1 pc. measuring case 50-100mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije. Kdjdpovtancsfx Af Tsg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake Kdsdpfovambcex Af Tsg >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown Kdjdpfx Asul Efmef Tsg on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 330 mm Kdodpfeuhampox Af Teg TURNING-MILLING SPINDLE - Travel X/Z: 410/400 mm - Travel Y: 200 mm - B-axis stroke: -25/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 - Spindle speed: 30,000 rpm - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 s - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg HOURS OF OPERATION - Operating hours: 11,659 h ACCESSORIES - Control: Fanuc 31i model A5 - Direct path measuring systems - Coolant tank * with high pressure pump: 70 bar * Internal coolant supply (ICS) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece measuring probe: Renishaw OMP40-2 - Parts removal - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Bar puller