Avtomatski stroj za izsekovanje

BRUDERER BSTA 300

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, dolžina brušenja: 1.000 mm, Notranja / zunanja vretena Naprav za vpenjanje s colletom Schaublin z vložki Podporni mostič 5 - 80 mm Podporni mostič 3 - 120 mm Hladilni sistem Filtrirni sistem Hitrosti glave: 1500 / 1700 / 2200 Hfjdpfx Ajxy I Tvof Tjb Višina centra: 175 mm Premer brušenja Ø: 350 mm Dolžina brušenja: 1000 mm Dimenzija brusnega kamna: 400 x 50 x 127 mm Hitrost brusnega kamna: 1500 / 1700 / 2200 obr/min Zasuk mize: 9° Konjiček: 4Mk Hladilna naprava: Da Filter: Da Dolžina: 2860 mm Širina: 1680 mm Višina: 1670 mm Teža: 2500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Hjdpfswuddvjx Af Tjfb Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: rabljeno, Leto izdelave: 2004, Press force: 80 t Stroke: 16 - 63 mm Stroke rate: 100 – 750 strokes/min Upright gap: 970 mm Installation height (stroke + ram adjustment, upper position): 380 mm Lateral frame opening: 380 mm Table surface: 940 x 910 mm Clear hole in table: 770 x 190 mm Table height above floor: 1,180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standard With infinitely variable three-phase motor drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feeder Bruderer BBV 205/120, driven via main shaft/universal shaft of the press Guethle CK support arms Hfodpsvuua Njfx Af Tob An optional soundproof booth can be offered – price upon request.

Stanje: dober (rabljeno), Leto izdelave: 2004, Ref. No.: Lg 34522 High-Performance Punching Press HAULICK+ROOS ROS 500 - 1250 used, in good condition Year of manufacture: 2004 (without soundproof enclosure) including - Infinitely variable drive - 2-connecting rod drive mechanism - Pneumatic clutch-brake combination - Stroke adjustment - Siemens PC 670 screen control - Oil circulation lubrication Technical Data Max. press force: 500 kN Stroke rate: 30 to 900 strokes/min Stroke: 12 to 60 mm Shut height (max, stroke at BDC): 320 mm Clearance between uprights: 1,250 mm Table area: 1,250 x 730 mm Pass-through opening in table: 1,160 x 140 mm Ram area: 1,250 x 450 mm Ram adjustment: 60 mm Drive power: 26 kW Weight: approx. 11,000 kg Dimensions (L x W x H): approx. 2,800 x 1,300 x 3,250 mm Equipment and Accessories: Servo roller feeder VAMCO SP 150 Year of manufacture: 2014 Hjdpfx Afoip Uqmo Tofb Feed width: max. 150 mm Material thickness: max. 3.0 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, obratovalne ure: 132 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20731, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, hitro pomikanje X-os: 90 m/min, hitri pomik os Y: 90 m/min, hitri pomik na osi Z: 90 m/min, nazivna (navidezna) moč: 35 kVA, proizvajalec krmilnikov: Fanuc 31I, največja hitrost vretena: 42.000 obr/min, delovne ure vretena: 132 h, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 15 W, nos vretena: HSK E40, vhodna napetost: 415 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist ausgestattet mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung. Wiederholgenauigkeit beträgt +/- 0,001 mm. Hsdpevcfi Djfx Af Tjfb High Speed und High Accuracy Option auf Fanuc verfügbar. Eine Besichtigung der Maschine unter Strom ist möglich.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, stružna dolžina: 3.000 mm, premer struženja: 1.050 mm, največja hitrost vretena: 1.500 obr/min, zunanji premer vpenjalne glave: 375 mm, マルチタスキングマシン OKUMA MULTUS B750 C3000 年式：2017年 Hfedpfxswi Ezro Af Tjb OSP-P300SA 15インチチャック 最大加工径：1050mm 最大加工長：3000mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, Največja teža obdelovanca: 500 kg Pomiki: X: 350 mm Hfjdsv Ai Ukopfx Af Teb Y: 250 mm Z: 300 mm C: 360° Leto izdelave: 2017 16-pozicijski izmenjevalec RTC

Stanje: zelo dobro (rabljeno), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive graphical user interface (GUI) operating on Microsoft Windows XP Professional. Instrument configuration includes the following features: - Magnification range: 5x - 300,000x - Accelerating voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, including: - Graphical navigation on the specimen holder - Easy sample navigation via click-center-zoom - Field-of-view controlled navigation using two navigators - Relative coordinate navigation - Save and recall sample positions - Adjustable specimen stage field-of-view process - Field-of-view correction during rotation via computer-controlled eccentric rotation - Field-of-view correction during tilting via computer-controlled eccentric tilt - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking when moving the sample in the Z-direction - Intelligent limit switches for the motorized axes Specimen stage travel range: - x = 125 mm - y = 100 mm - z = 5 to 80 mm (stepless) - T = -10°C to +90°C - R = 360° (continuous) - Secondary electron detector for high vacuum operation - Innovative superconical objective lens to ensure highest image resolution even at high tilt angles - Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV - Simultaneous live image display from multiple detectors - Easy sample navigation via click-center-zoom - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile sample chamber with various expansion options: free flanges (e.g., for EDX, WDX, EBSD, cathodoluminescence, etc.) - Maintenance- and wear-free, quiet pumping system consisting of forepump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive fault protection to prevent operator error and external media failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool kit, and 6 spare cathodes Additional equipment for scanning electron microscope: - Turbomolecular pump instead of standard diffusion pump - When using a turbomolecular pump, no cooling water is required for SEM operation. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software license will be transferred to the new owner upon purchase! - Nitrogen-free, energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements from boron upwards - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standards-free element analysis - Image acquisition - Ultra-fast qualitative line scan - Ultra-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and instruction - HyperMap - Multipoint analysis Hsdpjmn Rcqofx Af Tofb - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (See photos) Condition: used (Subject to change and errors in the technical data and specifications!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, SIEMENS 840D SL control system Travel paths: 550 x 320 x 420 mm Swiveling milling head: +100 / -10° Spindle taper: HSK A50 Spindle speeds: up to 12,000 rpm Tool changer: 64 positions Rotary spindle: 4,500 rpm NC swiveling rotary table with B and C axes Tool breakage monitoring Tool length measuring device 3D probe Various accessories Hsdpfx Afowwunds Tjfb MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. Hodjul Efmopfx Af Tjfb The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data