Stroj za površinsko brušenje

Ziersch GmbH ZT 820

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 32 mm - Travel Path: 240 mm - Spindle Speed: 8,000 rpm - Spindle Drive Power: 7.5 kW - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 32 mm - Spindle Speed: 6,000 rpm BUSH HOLDER 1 - Number of Positions: 5 BUSH HOLDER 2 - Number of Positions: 5 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm FRONT TOOL POST - Number of Positions: 4 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm BACK WORKING STATION - Number of Positions: 7 Bledpjuhax Esfx Aiqjn - Number of Powered Positions: 3 - Driven Tool Speed: 6,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V MACHINE HOURS - Operating Hours: 56,433 h ACCESSORIES - Control System: Fanuc - Tool Drive Motorization at: S2, S3, S5 V+H - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Blodpet Hwt Ssfx Aiqen Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Bsdpfx Ajq N E U Asiqeln Lifting capacity max. 1 ton at 5.3 meters Operating hours: 270 h Electric: yes

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 26.476 h, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 500 mm, premer obdelovanca (maks.): 630 mm, teža obdelovanca (maks.): 200 kg, skupna višina: 2.590 mm, skupna dolžina: 4.780 mm, skupna širina: 4.410 mm, višina mize: 390 mm, dolžina mize: 390 mm, skupna masa: 5.900 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 25 W, število mest v zalogovniku orodij: 30, Oprema: transportni trak za ostružke, CNC-nadzor: Heidenhain iTNC 530 Osi Hod osi X mm: 500 Hod osi Y mm: 450 Hod osi Z mm: 400 Osi C, kotna postavitev v stopinjah: 360º (0,001) Osi B, kotna postavitev v stopinjah: 0º/108º (0,001) Hitrost premikanja m/min: 80/50/50 NC-rezalna/obračalna miza: Dimenzije palete mm: Ø390 Maks. velikost obdelovanca (premer x višina) mm: Ø630x500 Maks. teža obdelovanca kg: 200 Vreteno Maks. hitrost vrtenja vretena U/min: 18000 Moč pogona vretena kW: 35/25 (40%ED/kontinuirano) Navor vretena Nm: 130/87 Sistem orodij Vpenjalnik orodja: HSK-A 63 Število orodij v reviziji: 30 Z mesti za dodatna orodja, prosti mm: 130 Z mesti za dodatna orodja, zasedeni mm: 80 Maks. dolžina orodja mm: 300 Čas od orodja do orodja sek.: 5 Oprema Odstranjevalec стружков Tipalo za merjenje, infrardeče Pištola za hlajenje Stisnjen zrak, usmerjen skozi sredino vretena, izbira prek funkcije M Bodez Dku Uepfx Aiqjln Signalna luč Merjenje orodja z laserjem za merjenje dolžine in premera orodja Programirljive šobe za hladilno tekočino Izmenjevalnik toplote Neposreden merilni sistem XYZ Električna omarica, enota za aktivno hlajenje Odstranjevalec olja Pripravljeno za notranje hlajenje (40/80 bar) Merilno tipalo RENISHAW Avtomatska vrata delovnega prostora Čas delovanja stroja: Število ur priključenih na električno omrežje: 43774 Čas delovanja vretena: 26476 Skupna poraba moči kVA: 48 Osnovni stroj: Dimenzije/teža Dolžina mm: 4780 Širina mm: 4410 Višina mm: 2590 Teža kg: 5900

Stanje: rabljeno, Naprodaj je visokokakovostna 3D višinska merilna naprava TESA Micro-Hite v veliki, motorizirani izvedbi, ki predstavlja celoten merilni delovni prostor. Naprava združuje natančno merjenje višine z razširjenimi 2D/3D koordinatnimi funkcijami in je idealna za uporabo v kontroli kakovosti, merilni tehniki in proizvodnji. Posebej izstopa obsežen nabor dodatne opreme ter obstoječa povezava z osebnim računalnikom z možnostjo tiskanja, kar omogoča neposredno ustvarjanje in dokumentiranje merilnih protokolov. Tehnična oprema: Proizvajalec: TESA (Švica) Model: Micro-Hite 3D Izvedba: Višinska merilna naprava / 3D-kompatibilna merilna kolona Merilno območje: približno 600 mm (velika izvedba) Ločljivost: do 0,0001 mm (0,1 µm) Pogonski sistem: motorizirano nastavljanje Merilni sistem: digitalni / elektronski Izpisa podatkov: vmesniki za osebni računalnik / periferijo Merilne funkcije: Merjenje višine Merjenje notranjih in zunanjih dimenzij Določanje premera Merjenje razdalje 2D/3D merjenje točk Izračuni geometrije in lege Oprema: Granitna merilna plošča Stabilna konstrukcija stroja Motorizirana merilna kolona Integrirana upravljalna enota Zunanji delovni prostor za osebni računalnik (monitor, računalnik, vnosne naprave) Tiskalnik za izpis protokolov Dodatna oprema: Obsežen komplet merilnih tipk (rubinove konice, podaljški itd.) Oprema za pritrditev orodij in držala Kovček za dodatno opremo / lesena škatla Bedpfx Aey Tkg Ueiqoln Merilna naprava je že razstavljena in zapakirana.

Stanje: rabljeno, Leto izdelave: 2019, Tehnične podrobnosti: Blsdpfszp Itbsx Aiqon x-os: 16000 mm y-os: 4000 mm z-os: 1600 mm

Leto izdelave: 2019, obratovalne ure: 380 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 300 kg, skupna širina: 730 mm, skupna višina: 1.585 mm, laserska moč: 300 W, Ta 3-osni laser ALPHA LASER ALM 300 je bil proizveden leta 2019. Opremljen je z zmogljivim Nd:YAG laserjem s povprečno močjo 300 W in vršno impulzno močjo 9 kW. Delovno območje znaša 120 × 110 × 800 mm, kar omogoča široko paleto uporabnosti. Če iščete visokokakovostne laserske možnosti varjenja, priporočamo naš naprodajni stroj ALPHA LASER ALM 300. Za več podrobnosti nas kontaktirajte. • Tip laserja / valovna dolžina: Nd:YAG, 1.064 nm • Način delovanja: pulzni • Povprečna moč: 300 W • Vršna impulzna moč: 9 kW Bodpfx Aiozf A Ifjqeln • Impulsna energija: 90 J • Trajanje impulza: 0,5–20 ms • Frekvenca pulza: posamezen pulz do 100 Hz • Premer varilne točke: 0,2–2,0 mm • Fokusna leča: 150 mm (druge leče na voljo po podatkovnem listu leč) • Delovno območje / osi: • Hitrost pomika (X/Y/Z): 0–25 mm/s • Premik (X/Y/Z): 120 × 110 × 800 mm • Najnižja delovna točka: 530 mm • Najvišja delovna točka: 1590 mm • Dolžina roke: 1300 mm • Pogledna lupa / ergonomija: mikroskopski nastavek z okularji za uporabnike z očali 10× • Električni priključek: 3 × 400 V / 50–60 Hz / 3 × 16 A • Stanje: Uporabljeno izključno za demonstracije in razstave; tehnično in vizualno v odličnem stanju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Bodpey Tmhzjfx Aiqjln Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 435 h, skupna višina: 1.065 mm, skupna širina: 645 mm, skupna masa: 114 kg, potovalna razdalja osi X: 165 mm, največja dolžina izdelka: 685 mm, število osi: 3, Plastic 3D printer, manufactured in 2021. This FORMLABS Fuse 1 offers a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a Ytterbium Fiber type laser and has a maximum part size of 15.9 x 15.9 x 29.5 cm. If you are looking for high-quality 3D printing capabilities, you should consider the FORMLABS Fuse 1 machine we have for sale. Contact us for more details. Formlabs Fuse 1 • Build volume: 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in) • Layer thickness: 110 microns (0.004 in) • Build speed: 10 mm per hour (0.39 in per hour) • Laser type: Ytterbium fiber • Laser spot size: 200 microns (0.0079 in) • Material refresh rate: 30 to 50 percent • Hopper capacity: 8.5 kg PA12 nylon (18.7 lb) • Dimensions: 685 x 645 x 1065 mm • Maximum part size: 15.9 x 15.9 x 29.5 cm (6.3 x 6.3 x 11.6 in) • Minimum access dimensions: 125.5 x 149.5 x 187.0 cm (49.4 x 59.0 x 73.6 in) • Printer dimensions: 64.5 x 68.5 x 107 cm, 165.5 cm with stand • Weight: 114 kg • Warm-up time: 60 minutes • Operating environment: 18 to 28 °C (68 to 82 °F), ≤ 30% relative humidity • Internal temperature: 200 °C (392 °F) • Temperature control: quartz tube heating elements, PTC cartridges • Air filtration: pressure-controlled two-stage filtration (HEPA and carbon) • Power requirements: EU 230 VAC 7.5 A, US 120 VAC 15 A • Galvanometer: Formlabs custom • Laser wavelength: 1065 nm • Laser power: max. 10 watts • Beam divergence: 4.01 mrad • Laser class: Class 1 • Connectivity: WiFi 2.4 GHz, Ethernet 1000Mbit, USB 2.0 • Touchscreen: 10.1 in (1280 x 800) • Controller brand: Formlabs • The display is damaged, but this does not affect functionality Fuse Sift (optional – price on request): • Fuse Sift dimensions: 99.1 x 61.0 x 188.8 cm (39.0 x 24.0 x 61.8 in) • Fuse Sift weight: 93 kg without build chamber or powder (205 lb) • Build chamber dimensions: 27.9 x 34.2 x 48.9 cm (11.0 x 13.5 x 19.3 in) • Build chamber weight: 11 kg (17.6 kg full with 20% packed powder; 24.3 lb, 38.8 lb) • Build volume: 16.5 x 16.5 x 30.0 cm (6.5 x 6.5 x 11.8 in) • Fresh powder container capacity: 8.5 kg Nylon 12 (18.7 lb) • Waste powder hopper capacity: 9.1 kg Nylon 12 (20 lb) • Air filtration technology: replaceable HEPA filter • Operating environment: 18 to 26 °C (68 to 80 °F), ≤ 30% relative humidity • Air management: negative overpressure hood with replaceable HEPA filter, independent ventilation system • Power requirements: EU 230 VAC 7.5 A, dedicated circuit; US 120 VAC 15 A, dedicated circuit • Power requirement for high-performance vacuum: EU 230 VAC 10 A; US 120 VAC 20 A Bsdpfx Aisy Sy Nvjqoln • Vacuum requirements: auxiliary vacuum with static-dissipative, grounded components • Noise emission: max. 76.5 dB

Stanje: rabljeno, Leto izdelave: 2018, Type: Assembly Machine Weight: 120 kg According to our assessment, the machine is in very good used condition and can be inspected under power by prior appointment. Technical Features: - Robojob Mill-Assist: - Raw part handling - Simple dialog-based control - Very easy operation - Raw parts can be stacked on the table - Pallet storage - Parts cleaning Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Bledpfx Aijxq R E Aoqsn Subject to changes and errors in the technical data and specifications, as well as prior sale!