Avtomatski stružnica
Traub TNL12/7

Name: Traub TNL12/7
Brand: Traub
Availability: InStock

Leto izdelave

2005

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Walluf

Prikaži karto

Podatki o stroju

Oznaka stroja:: Avtomatski stružnica

Proizvajalec:: Traub

Model:: TNL12/7

Leto izdelave:: 2005

Stanje:: rabljeno

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Am Klingenweg 27, 65396 Walluf, Deutschland

Pokliči

Podrobnosti ponudbe

ID oglasa:: A21458677

Posodobitev:: nazadnje dne 10.03.2026

Opis

TECHNICAL DATA

Spindle Head
- Max. bar diameter (mm): 13.0
- Material tolerance (DIN 671) (mm): Ø Xh9
- Collet chuck (optional): Through-hole
- Guide bush (optional): Through-hole
- Max. turning length / spindle stroke:
-- With fixed guide bush (mm): 130
-- With rotating guide bush (mm): 80
-- With programmable guide bush (mm): 80
- Spindle speed: 12,000 rpm
- C-axis electronic resolution (degrees): 0.001
- Rapid traverse Z1 (m/min): 30

Tool Carrier 1
- Slide travel X1 (mm): 35
- Slide travel Y1 (mm): 38 (-10 +28)
- Rapid traverse X1 / Y1 (m/min): 15
- Tool stations (qty): 6 (12)
- Turning tool cross-section (mm): 8x8 or 12x12
- Clamping diameter for drilling tools, driven (mm): 0.5 - 7
- Chip-to-chip time (s): 0.3

Tool Carrier 2
- Slide travel X2 (mm): 35
Bwjdeyr N Dzopfx Agtol
- Slide travel Z2 (mm): 50
- Rapid traverse X2/Z2 (m/min): 15
- Tool stations (qty): 6
- Turning tool cross-section (mm): 8x8 or 12x12
- Clamping diameter for drilling tools, driven (mm): 0.5 - 7
- Chip-to-chip time (s): 0.3

Tool Drive for Tool Carriers 1 and 2
- Speed (rpm): 0...8000
- Maximum number of tools: 2x6
- Clamping diameter for drilling tools (mm): 0.5 - 7

Sub-Spindle / Front Attachment
- Max. bar diameter (mm): 13.0
- Max. longitudinal stroke (23, 24 / X3) (mm): 140 | 228
- Rapid traverse (23, 24 / X3) (m/min): 30
- Tool stations (qty): 4
- Spindle speed: 12,000 rpm
- C-axis electronic resolution (degrees): 0.001

Rear Attachment, Synchronized / Fixed
- Z travel, synchronized with working spindle (mm): 80
- Tool holder diameter (mm): 20
- Tool stations (qty): 3

Rear Attachment (X4 Axis)
- X4 travel (mm): 39
- Rapid traverse speed (m/min): 15
- Tool holder diameter (mm): 28
- Tool stations (qty): 4

Tool Drive for Rear Attachment (with X4 axis)
- Speed: 0...10,000 rpm
- Max. number of driven tools: 4
- Clamping diameter for drilling tools
-- Driven (mm): 0.5 - 7
-- Non-driven (mm): 0.5 - 10

Coolant System
- Pump pressure, single stage (bar): 3
- 120 bar pump for front/rear attachment
- Tank capacity (l): 180
- Delivery rate (l/min): 40

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2017

8 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 6123 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Zuchwil

580 km

Avtomatska stružnica
TraubTNL 12/7

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Bsdjt E Dbyspfx Agtowl Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Poglej podrobnosti

Mali oglas

Stroj za struženje švicarskega tipa STAR Micronics SR 20 R III

Italija

514 km

Stroj za struženje švicarskega tipa
STAR MicronicsSR 20 R III

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Splošni podatki Teža stroja: 2200 kg Višina: 1700 mm Globina: 1200 mm Dimenzije Dolžina stroja: 2200 mm Ta triosni stroj Star SR 20 R III je bil izdelan leta 1996. Omogoča največji premer struženja 20 mm, hitrost vretena do 8.000 vrt/min in hitro pomično hitrost 35 m/min. Idealno za precizno struženje, omogoča šest fiksnih postaj za stružne nože ter pet radialnih pogonskih postaj. Če iščete visokokakovostne stružne zmogljivosti, razmislite o stroju Star SR 20 R III iz naše ponudbe. Za več informacij nas kontaktirajte. Bwedpfx Agsx D Dwfotsl Vrste uporabe Struženje

Poglej podrobnosti

Mali oglas

CNC stružnica švicarskega tipa TRAUB TNL 12/7

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
TRAUBTNL 12/7

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor Bjdpfx Ajuhav Dsgtewl - Various fixed and driven tool holders

Poglej podrobnosti

Mali oglas

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
TRAUBTNL 12/7

Pokliči

Stanje: rabljeno, TECHNICAL DATA Bwedpfjuhaw Uox Agtel - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Poglej podrobnosti

Mali oglas

CNC center za struženje in rezkanje DMG CTX gamma 1250 TC

Nemčija

650 km

CNC center za struženje in rezkanje
DMGCTX gamma 1250 TC

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 Bedpfow Hg Nlox Agtowl The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Poglej podrobnosti

Mali oglas

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
TRAUBTNL 12/7

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 Bsdpfxsuhaxfe Agtowl - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Poglej podrobnosti

Mali oglas

CNC stružnica švicarskega tipa TRAUB TNL12/7 K

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
TRAUBTNL12/7 K

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm Bodpfx Ajuhawzjgtowl - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Poglej podrobnosti

Mali oglas

Stroj za luknjanje in upogibanje BIHLER RM 35

Grebenau

653 km

Stroj za luknjanje in upogibanje
BIHLERRM 35

Pokliči

Mali oglas

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
TRAUBTNL 12/7

Pokliči

Mali oglas

Avtomatska stružnica STAR Micronics SA-12

Zuchwil

580 km

Avtomatska stružnica
STAR MicronicsSA-12

Pokliči

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Bodpfx Agowi Ty Aotswl Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Poglej podrobnosti

Oglašujte tukaj