CNC stružnica švicarskega tipa

TRAUB TNL 12/7

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 13.0 - Material tolerance (DIN 671) (mm): Ø Xh9 - Collet chuck (optional): Through-hole - Guide bush (optional): Through-hole - Max. turning length / spindle stroke: -- With fixed guide bush (mm): 130 -- With rotating guide bush (mm): 80 -- With programmable guide bush (mm): 80 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 - Rapid traverse Z1 (m/min): 30 Tool Carrier 1 - Slide travel X1 (mm): 35 - Slide travel Y1 (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Tool stations (qty): 6 (12) - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Carrier 2 - Slide travel X2 (mm): 35 - Slide travel Z2 (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Tool stations (qty): 6 - Turning tool cross-section (mm): 8x8 or 12x12 - Clamping diameter for drilling tools, driven (mm): 0.5 - 7 - Chip-to-chip time (s): 0.3 Tool Drive for Tool Carriers 1 and 2 - Speed (rpm): 0...8000 - Maximum number of tools: 2x6 - Clamping diameter for drilling tools (mm): 0.5 - 7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 13.0 - Max. longitudinal stroke (23, 24 / X3) (mm): 140 | 228 - Rapid traverse (23, 24 / X3) (m/min): 30 - Tool stations (qty): 4 - Spindle speed: 12,000 rpm - C-axis electronic resolution (degrees): 0.001 Rear Attachment, Synchronized / Fixed - Z travel, synchronized with working spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool stations (qty): 3 Rear Attachment (X4 Axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool stations (qty): 4 Tool Drive for Rear Attachment (with X4 axis) - Speed: 0...10,000 rpm - Max. number of driven tools: 4 - Clamping diameter for drilling tools -- Driven (mm): 0.5 - 7 -- Non-driven (mm): 0.5 - 10 Coolant System - Pump pressure, single stage (bar): 3 - 120 bar pump for front/rear attachment - Tank capacity (l): 180 Ppodjyr N Dzopfx Agxer - Delivery rate (l/min): 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Splošni podatki Teža stroja: 2200 kg Višina: 1700 mm Globina: 1200 mm Dimenzije Dolžina stroja: 2200 mm Ta triosni stroj Star SR 20 R III je bil izdelan leta 1996. Omogoča največji premer struženja 20 mm, hitrost vretena do 8.000 vrt/min in hitro pomično hitrost 35 m/min. Idealno za precizno struženje, omogoča šest fiksnih postaj za stružne nože ter pet radialnih pogonskih postaj. Če iščete visokokakovostne stružne zmogljivosti, razmislite o stroju Star SR 20 R III iz naše ponudbe. Za več informacij nas kontaktirajte. Vrste uporabe Struženje Psdpfxjx D Dwfo Agxepr

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder Ppodpfxjt E Dbys Agxer - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 Ppodpfx Ageuhav Doxer - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor - Various fixed and driven tool holders

Stanje: kot nova (razstavni stroj), Various designs available, such as round, hexagonal, or square, and in smooth, cross-serrated, or both longitudinal and cross-serrated versions. Psdpfjh Dmamox Agxepr A current list of available as-new and new clamping heads SK32/SK42/SK52/SK65/SK80/SK100 can be found on our homepage. We look forward to your inquiry. STALEX Werkzeugmaschinen GmbH

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turrets: 2 UPPER TURRET - Number of stations: 6 - Number of driven stations: 6 - X travel: 35 [mm] - Y travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET - Number of stations: 6 - Number of driven stations: 6 Psdpfjuhaw Uox Agxepr - X/Z travel: 35/79.5 [mm] FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] - X/Z travel: 415/138.5 [mm] SUB OPERATIONS - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] Ppedpfx Aeuhaxfjgxsr SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Pedpfowi Ty Asx Agxjpr Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis increment: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT DEVICE - Number of positions: 4 BACKWORKING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 18 kW EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: main spindle - Parts catcher - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 Ppodpfx Ajuhawzsgxer - Sleeve: 4 - Set of bushings and collets for bar feeder magazine - Set of spare parts

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Multispindle lathe Schütte AG20 Ppodjhrihyopfx Agxor