Pogonjen nosilec orodja

Traub TNL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Ffodjx Hxv Dspfx Aflot Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije. Fjdjvtancspfx Afljft

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 10.000 obr/min, skupna masa: 5.000 kg, skupna širina: 1.500 mm, skupna dolžina: 4.000 mm, skupna višina: 2.400 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 40 m/min, moč: 24 kW (32,63 KM), pomik po osi Z: 205 mm, Oprema: dokumentacija / priročnik, Nudimo naprodaj enega izmed naših strojev, ki ga izločamo kot del načrtovane obnove našega strojeparka. Stroj je TRAUB TNL 18P stružnica z drsnim vretenom, letnik 2013, ki je v dobrem tehničnem stanju. Razlog za prodajo je nabava nove tehnologije v okviru nadgradnje strojeparka. Trenutne delovne ure znašajo 43.000. Ponudba vključuje tudi podajalnik palic FMB Minimag 20/3200, ki zagotavlja nemoteno in učinkovito dovajanje materiala v stroj. V okviru dobave lahko zagotovimo tudi notranjo opremo, vključno z vodili in vpenjalnimi vložki za glavno vreteno, protivreteno in podajalnik palic, primerno za materiale do premera 12 mm. Za več informacij me prosim kontaktirajte. Fedpfx Afexdk Ukeloft

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 53.000 h, Funkcionalnost: popolnoma funkcionalen, For sale is a high-precision INDEX TRAUB TNL 32-7 in absolutely top condition. This machine is a former TRAUB showroom model with full equipment. It was purchased at the end of 2016 and has been exceptionally well maintained ever since. The machine is sold with an extensive tooling package. The included tool holders alone (including numerous driven double and triple holders) have a replacement value of approximately €25,000 to €30,000. This makes the machine an ideal solution for companies looking to start complex production immediately without time-consuming additional investments. • Flexibility: The machine can be used in both Swiss-type (sliding headstock) and fixed headstock turning modes—a decisive advantage for changing production requirements. • Condition & usage: The machine has always been operated with oil (no emulsion!) and approx. 95% of the work involved stainless steel. This has resulted in outstanding mechanical condition. • Accessories package: The machine comes with a very extensive set of tool holders, including many driven holders (also double and triple holders). Numerous collets for main and sub spindle, as well as multiple channels for bar feeder operation, are included. • Documentation: The original order confirmation detailing the full equipment is available for inspection. IMPORTANT NOTE REGARDING SALES (BUNDLE DEAL): I am currently selling a total of three high-quality lathes. In addition to this TNL 32-7, two TRAUB TNK 36 machines are also available for purchase, which can also be found here on Machineseeker. If all three machines are purchased in a package, I offer an unbeatable total price! In case of complete purchase, I will also include substantial extras that are not part of the standard delivery, such as additional chip carts (several included), various tools, and workbenches—everything needed for immediate production start-up. - Location: 79115 Freiburg (DE) - Availability: The machine is powered, can be demonstrated, and is immediately available. - Scope of delivery: Includes tool holders, collets, and complete documentation. • Year of manufacture: 2014 (commissioned end of 2016) • Condition: Very well maintained, oil-operation • Control: TRAUB TX8i-s • Working range: Bar capacity Ø 32 mm • Spindles: Main and sub spindle (both up to 8,000 rpm & C-axis) • Tool carriers: • Upper: 10 stations (Dual Drive) • Lower: 9 stations (separate sub spindle drive) • Rear: 8 stations (prepared for internal coolant supply) • High-pressure package: ECO-Fluid system with frequency-controlled pump (20–80 bar) – perfect for oil operation and tough materials. • Precision package: Additional glass scales on X-axes. • Cooling & filtration: Paper band filter (50 µm) and air-cooled immersion chiller (4.5 kW). • Safety: Automatic CO2 fire extinguishing system (Kraft & Bauer) – essential for safe oil operation – and coolant mist extraction. • Software: Extensive packages for Polyform, helical turning, polygon turning, and gear hobbing. Automation & peripherals • Bar feeder: FMB Turbo 3-36 (up to 3,200 mm bar length) incl. shifting device. Ffodpfox Sr I Rox Aflet • Parts removal: Integrated parts gripper and conveyor belt for gentle part removal. Price: On request (attractive bundle deal)

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Fjdouhaqbspfx Afloft

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Description: The machine is in good technical condition and can be tested by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, which ensures smooth and efficient material feeding into the machine. As part of the delivery, we can also provide internal equipment – guide bushes and collets for the main spindle, sub-spindle, and bar feeder – suitable for material diameters ranging from 3 to 12 mm. Maximum bar capacity: 20 mm (0.8 in) Z1 stroke max.: 205 mm (8.1 in), 80 mm (3.1 in) Maximum spindle speed: 10,000 rpm (both spindles) Power at 100% / 40% duty: 2.2 / 3.7 kW (3.0 / 5.0 hp) Torque at 100% / 40% duty: 14 / 23.5 Nm (10.3 / 17.3 ft-lb) C-axis resolution: 0.001° Rapid traverse Z1: 40 m/min (1,574 in/min) Upper turret: Ffodpex An T Uofx Aflet - Number of tool stations: 8 - Number of driven tool positions: 8 - Power at 100% / 40% duty: 1 / 2 kW (1.3 / 2.7 hp) - Tool shank diameter: 45 mm (1.8 in) - Turning tool size: 16 x 16 / 12 x 12 mm (0.6 x 0.6 / 0.5 x 0.5 in) X1 travel: 120 mm (4.7 in) Rapid traverse X1: 20 m/min (787 in/min) Chip-to-chip time:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 6.700 W, stružna dolžina: 305 mm, premer struženja nad prečnim suportom: 32 mm, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 1 obr/min, premer struženja: 32 mm, izvrtina vretena: 32 mm, skupna masa: 7.350 kg, vrsta vhodnega toka: trifazni, prehod palice: 32 mm, dolžina podajanja os X: 140 mm, dolžina pomika po osi Y: 65 mm, dolžina podajanja os Z: 305 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, CNC Swiss-Type Automatic Lathe Manufacturer: Traub Model: TNL 32 T-9 Control: TX8i-s Year of manufacture: 2013 Location: Sweden, still in production Delivery window: from January / February 2026 Operating hours: approx. 40,000 h Technical Data Spindle bore (mm): 32 Max. spindle speed (rpm): 8,000 Power (100% / 25% duty cycle) (kW): 6.7 / 10.7 Torque (100% / 40% duty cycle) (Nm): 21 / 32 C-axis resolution (degrees): 0.001 Z-axis travel (mm): 305 / 127 (Swiss-type / fixed head) Rapid traverse Z (m/min): 20 Counter Spindle Spindle bore (mm): 30 Max. spindle speed (rpm): 6,400 Power (100% / 25% duty cycle) (kW): 3.7 / 5.5 Torque (100% / 40% duty cycle) (Nm): 29.4 / 43.7 C-axis resolution (degrees): 0.001 X-axis travel, rapid traverse (mm / m/min): 140 / 20 Z-axis travel, rapid traverse (mm / m/min): 300 / 20 Tool Carrier 1 Configurable as turret Number of stations: 10 Max. speed (rpm): 12,000 Max. power (kW): 3.4 X-axis travel, rapid traverse (mm / m/min): 140 / 20 Y-axis travel, rapid traverse (mm / m/min): -40/+25 / 20 Z-axis travel, rapid traverse (mm / m/min): 300 / 20 Ffjdpfsx Rwkuox Afljt Tool Carrier 2 Configurable as turret Number of stations: 10 Max. speed (rpm): 12,000 Max. power (kW): 3.4 X-axis travel, rapid traverse (mm / m/min): 140 / 20 Y-axis travel, rapid traverse (mm / m/min): -25/+40 / 20 Z-axis travel, rapid traverse (mm / m/min): 320 / 20 Dimensions, Weight, Power Supply Weight: 7,350 kg (depending on equipment) Connected load (kW): 28 Additional Equipment - Chip conveyor - External tank with paper band filtration system - Bar loader: FMB Turbo 3-36, 4.2 m bar length - Guide bushings, collets, magazine bushings (?) - Tool holders, driven and static - Documentation - High-pressure coolant system - Fire extinguishing system + control unit Kraft & Bauer Operator screen and hard drive were replaced in spring 2025 (approx. €24,000 incl. service costs) New drive belts for main spindle and driven tools have recently been replaced Scheduled maintenance carried out In 2019–2020, multiple extensive and costly overhauls were performed on spindles and drive units, including new bearings and a new motor. At 27,000 operating hours All information provided to the best of our knowledge and belief; errors excepted Subject to prior sale All prices are net, excluding VAT, and without transport costs

Stanje: rabljeno, Leto izdelave: 2008, Premer kolesa - maks. 300 mm Modul - maks. 8 Modul - min. 0,7 Krmiljenje SINUMERIK 840 D Kot delnega stožca - min./maks. - 90 / + 90 ° Vreteno delovnega predmeta - izvrtina 127 mm Premer brusnega kolesa 50 - 230 mm Število vrtljajev brusnega vretena brezstopenjsko 7.500 U/min Število vrtljajev vretena obdelovanca 700 U/min Skupna potrebna moč 146 kW Teža stroja pribl. 21 t Ffedpfx Aovxww Soflst Prostorska zahteva pribl. 9,5 x 3,6 x 3,1 m Merilna sonda za zobno režo (integrirana v brusno glavo) Zunanja brusilna vretena - naprava za hlajenje Odsesavanje oljne megle ELBARON (integrirano v stroju) Filtrirni sistem hladilnega sredstva Hoffmann Uporabljalo se je za serijsko proizvodnjo spiralno zobatih krožnih zobnikov Brez vpenjalnih sredstev Brez brusnih koles / prirobnic za brusna kolesa Brez diamantnih rezil

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, SAMO 8.300 ur vretena! Krmilnik: TX 8 i-p GLAVNO VRETENO maks. premer palice: 32 mm maks. dolžina obdelovanca - dolgi način struženja: 245 mm - kratki način struženja: 125 mm maks. hitrost vretena: 6.400 /min C-os PROTIVRETENO maks. premer palice: 32 mm maks. dolžina vpenjanja obdelovanca: 250 mm maks. hitrost vretena: 6.000 /min C-os ZGORNJI REVOLVER ORODIJ Število postaj: 10 vse gnane maks. hitrost: 12.000 /min SPODNJI REVOLVER ORODIJ Število postaj: 9 vse gnane maks. hitrost: 12.000 /min ZADNJA ENOTA Število postaj: 8 od tega 3 gnane (T12, 13 in 14) Hitrost T12 & T14: 12.000 /min Hitrost T13: 4.000 /min Fsdpfx Afjxrf Etjljft Transportni trak za dele Transporter za ostružke KSS črpalka 20 bar IFS filter za oljno meglo Podajalec palic FMB turbo 3-36

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment: Number of stations: 4 Ffedpfxex E Inms Afljt Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar loader, FMB Minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Mechanical interface prepared Tool holders: Various static and driven holders

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data Fedpfxsul Efmo Aflsft

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Glavni pogon Število osi: 9 Hitrost vretena: 8000 vrt/min Ta 9-osni švicarski stružni stroj TRAUB TNL 32 je bil izdelan leta 2014. Opremljen je z upravljanjem TX8i-s s 64-bitnim RISC CNC/PLC procesorjem, barvnim TFT zaslonom in elektronskim ročnim kolesom. Glavno vreteno omogoča premer izvrtine 32 mm, stroj pa vključuje tudi podvreteno z osjo C. Ponuja dvojno gnano zgornjo orodjarno in spodnjo orodjarno z devetimi držali za orodja. Razmislite o nakupu tega švicarskega stružnega stroja TRAUB TNL 32. Za več informacij nas kontaktirajte. Fjdjx D Drcspfx Afljft Vrste uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 12.000 obr/min, premer struženja: 32 mm, skupna masa: 7.000 kg, hitri pomik na osi Z: 20 m/min, moč: 10,7 kW (14,55 KM), Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, C-os Zgornji revolver za orodja z osmi X/Y/Z/H z 10 orodnimi mesti Ffsdpfx Asx Diglsflst Spodnji revolver za orodja z osmi X/Y/Z/H z 9 orodnimi mesti Zadnja enota z 8-kratnim pogonom za 3 orodja Tečajni trakasti transporter Papirni trakasti filter Resy Nadzor orodij Traub Magazin za nalaganje palic FMB LSK 38

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Ffedpov Scrbefx Afljt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Fjdpfx Aswuddvjfloft Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)