Truab TNL 18P

Traub TNL 18P

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, CNC Double Spindle Turning Center Control: CNC Path Control incl. 19" TFT Siemens Sinumerik 840 D sl Solution Line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter up to tool turret 2: 540 mm Travel distances: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter spindle slide: 180 mm Z3 – Counter spindle slide: 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0-4000 rpm Bar capacity: 102 mm Drawtube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Giodpowcd S Nefx Afqjl Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0-5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Maximum power (100/40% duty cycle): 10.9/14.2 kW Maximum torque (100/40% duty cycle): 26/34 Nm Speed range: 40 – 10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Maximum power (100/40% duty cycle): 10.9/14.2 kW Maximum torque (100/40% duty cycle): 26/34 Nm Speed range: 40 – 10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool axis resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES - Short bar loader magazine IRCO ILS-RBK 100/16 - Various main spindle reducing tubes - NC-controlled workpiece pick-up device for both main and counter spindle The system consists of NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws - Conveyor belt for removal of workpieces from the machine - Coolant system 8/20 bar with immersion cooler - Chip conveyor - Oil mist extraction unit - Control cabinet cooling unit (up to 40°C) - Counter spindle slide - Easy-Tool Monitor - 1 collet chuck for quick-change collet size 100 for main spindle - 1 collet chuck for quick-change collet size 100, Nova Axis Fix for counter spindle - Approx. 40 various quick-change collets size 100 (full inventory) - Tool change device, pneumatic, ø 100 mm - Approx. 50 various tool holders, fixed and driven (full inventory) - Mounting elements - Documentation

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Gijdpfovivx Nox Afqel Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: Gjdpfx Afeiw Dlkjqoil - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Giedpfx Afeh Dzqloqol

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), A 3-axis precision milling machine, DMG Mori, is available. Travel path X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions (X/Y/Z): approx. 1800mm/1550mm/1850mm, weight: approx. 2,200kg, control unit: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Giedpfsvi N D Ssx Afqjl

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): Gisdpfot E Dbyex Afqsl - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Giodpfx Afjifi D Tjqsl Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder Gijdpfxewlvlgj Afqol • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 330 mm TURNING-MILLING SPINDLE - Travel X/Z: 410/400 mm - Travel Y: 200 mm - B-axis stroke: -25/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 - Spindle speed: 30,000 rpm Gsdjuhampopfx Afqsil - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 s - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg HOURS OF OPERATION - Operating hours: 11,659 h ACCESSORIES - Control: Fanuc 31i model A5 - Direct path measuring systems - Coolant tank * with high pressure pump: 70 bar * Internal coolant supply (ICS) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece measuring probe: Renishaw OMP40-2 - Parts removal - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Bar puller

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Lifting capacity: 4,500 kg Overall height: 2,705 mm Lift height: 5,675 mm Mast type: Triplex Gisdpfxewvtf Sj Afqol Fork length: 2,400 mm Drive type: Electric Including fork positioner Including sideshift UVV inspection and maintenance newly performed