Namizni vrtalnik

FLOTT TB 13 Plus (NEU ab Werk)

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. Kodpst Hw Shsfx Aqgslw 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.628 h, nosilnost: 3.000 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.647 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.450 mm, širina nosilnega okvirja vilic: 1.260 mm, lastna masa: 4.530 kg, vrsta pogona: Diesel, gradbena širina: 1.320 mm, Rough terrain forklift Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: Good Front tyres type: Pneumatic Front tyres size: 275/70 R22.5 Front tyres condition: 60 - 80% Rear tyres type: Pneumatic Rear tyres size: 7.00-12 Rear tyres condition: 60 - 80% Kjdpfx Ajvgh Ikjqgelw Side shifter, 3rd valve, front work lights, heater, particulate filter, full cab, full free lift, CE certificate,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, AccurioPress 6120 120-stranski črno-beli produkcijski tiskalni sistem z možnostjo skeniranja Kljdpeqlb S Ajfx Aqgsw PF-709 visoko zmogljiv podajalnik papirja RU-510 povezovalna enota Zbirni zaključni modul s spenjanjem FS-532 Števec: 9,2 milijona

Stanje: novo, Leto izdelave: 2026, Grinding of contoured materials using the side table Easy and quick abrasive belt replacement via a lever Movable unit enables operation in both horizontal and vertical positions Standard equipment includes an additional height-adjustable table Tensioning device ensures consistent abrasive belt tension Compact machine dimensions with a wide range of applications Kedpfx Aqsvuggzjgslw Technical data: Belt size [mm]: 2010 x 152 Worktable size [mm]: 790 x 221 Table height [mm]: 810 Stand height [mm]: 600 Auxiliary rounding table size [mm]: 514 x 221 Max. grinding length [mm]: 790 Extraction nozzle diameter [mm]: 100 Face and edge grinding angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 The listed price is net. Transport not included.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: PRJ069841, ALZMETALL bench drilling machine, drilling capacity in steel 14mm. Short spindle MK2, spindle stroke: 80mm, throat depth: 190mm, column diameter: 65mm, machine table usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-table distance min./max.: 75/357mm, machine table height adjustment via handwheel, machine base plate, usable area: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-to-base plate distance min./max.: 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Continuously variable speed 230-4000 rpm Standard equipment: 5" TFT LCD display with touch function: Manual input for target spindle speed, actual speed display, integrated drilling depth indicator with touch zero point transfer, virtual drilling depth scale on display, machine status displays and warning notices on display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, connection plug pre-installed, 2m cable length, three separate push buttons for clockwise – counterclockwise – stop, Ksdjlub Htjpfx Aqgjlw spindle holding via brake function, spindle guard with electrical interlock, lockable main switch, mushroom push-button (latching) for EMERGENCY STOP, stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD textured varnish signal white RAL 9003, PANTONE 7545c, black. Delivery time: from stock Waiblingen Beinstein.

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Maximum acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg Kedpoi Ar Rusfx Aqgolw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, skupna masa: 3.350 kg, Oprema: varnostna svetlobna zapora, Ponujamo to pripravljeno CNC upogibno stiskalnico Amada HFE MK2 5012, 50 ton, 4 osi. Leto izdelave: 2016 Pritisk stiskanja: 50 ton Maksimalna dolžina upogiba: 1250 mm Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Prodajalec ne prevzema odgovornosti za tipkarske napake ali napake pri prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršne koli garancije. Kledpjy H Hgwofx Aqgew

Stanje: rabljeno, Leto izdelave: 2001, Drehdurchmesser 340 mm Drehlänge 750 mm Steuerung SYSTEM TX 8H Spindeldurchlass 80 mm Umlaufdurchmesser über Planschlitten 530 mm Umlaufdurchmesser über Bett 665 mm Drehzahlbereich - Hauptspindel 3.150 min/-1 Antriebsleistung - Hauptspindel 22 kW Anzahl der Werkzeugplätze 12 Pos. Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Es sind 2 Maschinen verfügbar. Preis pro Stück. Maschine 1: - Bilder 1-5 - Betriebsstunden ca.55.790 h Maschine 2: - Bilder 6-10 - Betriebsstunden ca.54.347 h Technische Merkmale & Zubehör: - Y Achse - Zubehörpaket mit starren und angetriebenen Werkzeughaltern -Späneförderer Klsdpjxwdw Eefx Aqgsw Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Stanje: novo, Leto izdelave: 2026, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Kedpfx Aqjt D D Nzsgelw Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Stanje: rabljeno, Leto izdelave: 1999, Premer žaginega lista 275 mm Območje reza pri 90 stopinjah: okroglo 80 mm Območje reza pri 90 stopinjah: kvadratno 70 mm Območje reza pri 90 stopinjah: ploščato 100 x 60 mm Območje reza pri 45 stopinjah: okroglo 70 mm Območje reza pri 45 stopinjah: kvadratno 60 mm Območje reza pri 60 stopinjah: ploščato 80 x 50 mm Območje vpenjanja 110 mm Število obratov 45 / 90 vrt/min Skupna potrebna moč 0,5 kW Teža stroja cca 0,07 t Potrebna prostora cca 900 x 700 x 1600 mm Ročna hladna krožna žaga z: Klodsl R Nnnspfx Aqgsw - Strojno podnožje - Podporno letev 1500 mm