Trakovni krivuljni transporter Trakovna krivulja levo

Transnorm 180°-800-700-IR200

Stanje: rabljeno, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Hjdpfx Aecp Apyob Ejfd Stroke rate: 120 strokes/min Ram adjustment: 55 mm Ram surface: 290 x 210 mm Ram bore: 40 H7 mm Through-hole in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight: approx. 3.4 t Space requirements: approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Mechanical overload protection in ram (shear plate) - Control cabinet with touchscreen - Foot switch

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Hsdpfx Absb U Hwno Esfd Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), 2 pieces of 180-degree curve belt conveyors, Helix type for inclined belts with SEW – used –: Price per piece ex works: €2,995 (net)! Hsdpfx Ajfivh Eob Ejfd Manufacturer: Transnorm Model: 1600-105 Helix Year of manufacture: 2011 Conveyor curve: 180 degrees Nominal radius: 600mm Nominal width: 700mm Condition: good Available: immediately Location: Bautzen warehouse

Stanje: rabljeno, Decoiler/Rewinder for Coil Material WANZKE CAMU Type SC 515/M Serial No. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gear ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gear, directly on the mandrel shaft - Geared motor with electrical brake - Mandrel shaft with mechanical slip clutch, preset and adjustable via disc springs - Mandrel crown without band launch arms - No electrical control and without loop control switch Required space L x W x H: 1,300 x 800 x 1,230 mm Hfodjwvv Rqopfx Ab Eed Weight: 380 kg Good condition

Stanje: rabljeno, Leto izdelave: 2015, Transnorm Belt Curve Conveyor 180°-700-600 IR750 Left RA2329 Technical Data: Manufacturer: Transnorm Condition: good (used) Conveying Angle: 180° Nominal/External Width (NB): 700 mm Belt Width (GB): 600 mm Inner Radius (IR): 750 mm Overall Height (BH): 210 mm Motor Height (MH): 450 mm Motor Type: SEW Gear Motor, SA37/T DRS71M4/TH Electrical Data: 380-500 V, 0.55 kW Conveying Speed: please contact us Scope of Delivery: without supports (available on request) Optional: Hfjdpfju S I Rkjx Ab Ejd Supports Side Guides Frequency converter for stepless speed adjustment Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual and professional advice, simply contact us. You can reach us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, The team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 Hfodpfsk Abcrsx Ab Eod RA1483 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum smoothness and quiet operation. The images shown of the conveyor system were taken while it was still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 4820 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Height (BH): 210 mm Inner radius (IR): 1000 mm Curve angle: 180° degrees Support legs: optionally available Conveying speed (v m/s): infinitely variable up and down with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (wear as per pictures) Year of construction: 2001 Special features/accessories: Side guides included on both sides Optionally available: Support legs Net price plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual expert advice, simply get in touch with us. Contact us by phone or email. We will be happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics