Pnevmatska stiskalnica

Tox Pressotechnik MAG 008

Stanje: rabljeno, Leto izdelave: 2016, Stolpna stiskalnica Tox 4 Mag 008.288 A.001 leto 2016 Iasdpfx Afew D R I Ts Tol Tlačna sila: 80 kN Skupni hod: 180 mm Delovni hod: 12 mm Teža stroja: 760 kg

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. Iasdpfefxyhfex Af Tsl The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), SMG HZPU 8000-3000/2100-S1 Hidravlična vlečna stiskalnica Znamka: SMG Tip: HZPU 8000-3000/2100-S1 Leto: 1995 Iaedpfx Asn Awd Rsf Tsl Opis: Hidravlična vlečna stiskalnica s H-okvirjem Tlačna sila: 800 ton Vpenjalna površina: Pribl. 3.000 x 2.100 mm Vgradna višina: Maks. 1.400 mm

Stanje: dober (rabljeno), Leto izdelave: 1983, FGSH 50 TOS KURIM Milling Machine. Year of manufacture: 1983 (Czech Republic). Double-swivel head (new bearings, new gears). Beam for leveling with optical sight. Specifications: Table size: 630 x 1800 mm. Travel: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45-1400 rpm. Main motor power: 15 kW. Power requirement: 23 kW. Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg. Iaodpfx Afedqp Eue Tsl

Stanje: rabljeno, Leto izdelave: 1980, Pressing force: 160 t Bending length: 2500 mm Distance between uprights: 2000 mm Throat depth: 315 mm Stroke: 190 mm Table surface: 2500 x 400 mm Return speed: 100 mm/sec Approach speed: 100 mm/sec Closing speed: 50 mm/sec Working speed: 6 mm/sec Iaedpfxjlki Hqs Af Tol Table height above floor: 850 mm Ram surface: 2500 x 400 mm Slot spacing: 500 mm T-slots: 6 x 18 mm Drive power: 18.5 kW Oil capacity: 500 l Total power requirement: 22 kW Machine weight: approx. 10 t Space requirements: approx. 3.20 x 2.40 x 2.60 m Machine was recommissioned in 1993 after being updated in accordance with accident prevention regulations (UVV).

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Max. press force: 80 kN, stroke: 180 mm, power stroke: 12 mm, weight: 760 kg. Iaedpfx Asifptysf Tsl

Stanje: rabljeno, Leto izdelave: 2015, TIP: L13 / S0540C0311 Leto izdelave: 2015 Delovanje laserja: 33.112 h Delovanje žarka: 8.166 h Moč: 5.000 W Hod X: 4.000 mm Iodpfx Afoxd Uawe Teal Hod Y: 2.000 mm Hod Z: 750 mm Hod B: ±135° Hod C: n*360° Zaslon: TFT 12'' Vmesnik: SINUMERIK 840D

Stanje: novo, - Capacity: 1270 x 1.5 mm - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation Iodpfxeh Ralqj Af Tsal - 400V

Leto izdelave: 1986, Stanje: skoraj kot novo (rabljeno), Rabljena C-okvirna hidravlična stiskalnica PJ Hare ltd naprodaj: Hidravlična stiskalnica Pj Hare Limited na voljo MODEL STISKALNICE: 25HP Skupna višina (mm): 2425 Skupna širina (mm): 1120 Skupna globina (mm): 1470 Teža (kg): 2000 Premer pritrdilne luknje (mm): 18 Razmik pritrdilnih lukenj (mm x mm): 610 x 1108 Dimenzije pritrdilne plošče (mm x mm): 120 x 250 Kapaciteta olja (l): 50 Maks. tlak dovoda zraka (bar): 6 Min. tlak dovoda zraka (bar): 4 Moč glavnega motorja (kW): 7,5 Vrednost varovalke motorja (A): 20 Stiskalnica je opremljena z blazino Električni podatki: Minimalna vrednost varovalke (A): 35 Minimalni presek vodnika (mm²): 2,5 STRAN 2: Model 25HP: Kapaciteta (t): 25 Kapaciteta (kN): 250 Sila bata (t): 3,1 Hitrost približevanja bata: 425 Hitrost stiskanja bata: 35,1 Hitrost povratka bata: 289 Moč motorja (kW): 7,5 Približna teža (kg): 2000 Maks. hod: 150 Širina odprtine zaščite: 680 Višina odprtine zaščite: 300 Minimalna zaprta višina: 200 Maks. delovna višina: 450 Iajdpfx Ajhcfyuof Tol Nastavitev zaprte višine: 100 Globina grla: 250 Višina mize: 900 Širina mize: 650 Globina mize: 480 Od spredaj do sredine: 250 Premer odprtine za odmik: 150 Svetla odprtina pod mizo: 350/250 Podatki utorov T: 18,15,34,33 Debelina mize: 95 Širina stranskega žleba: – Širina navpičnega žleba: 255 Širina odprtine v grlu: 250 Višina odprtine v grlu: 250 Širina zgornje plošče: 420 Globina zgornje plošče: 220 Podatki o pritrdilnih luknjah zgornje plošče: 370, 170, 13 Premer držala orodja: 40 Dolžina držala orodja: 65 Premer pritrdilne luknje: 18 Skupna globina: 1400 Skupna širina: 900 Skupna višina: 2450 Razmik pritrdilnih lukenj: 1110 Hare stiskalnice naprodaj Nove C- in H-okvirne hidravlične stiskalnice naprodaj

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2386, vgradna višina: 280 mm, stiskalna sila: 25 t, širina mize: 440 mm, dolžina mize: 320 mm, hod: 100 mm, hydraulically overhauled SCHOEN double-column press TES 25 Year of manufacture: 1979/2025 Pressing force: 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine will be fully overhauled: - new control system - new light barriers - hydraulics reconditioned Iasdpfsvw Spmox Af Tol