Tiskarna s štirimi stolpci

TOX MAG 008.288.A.001

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation Pedpfx Aljfv Awaj Dsrb • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Leto izdelave: 2018, stanje: novo, Load capacity: max. 1,000 kg Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Prsdsdx Ryyepfx Al Deb Coil height: max. 800 mm

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Prodsw D Aq Tjpfx Al Dob Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: dober (rabljeno), Thread cutting machine Hahn und Goebel HG 12E Spindle speed: 180-900 rpm 380V Machine No. 1917/16 Thread range: M4-M65 Pjdpfod Rkbrex Al Dsrb

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Podpouua H Rofx Al Dsrb Overhauled with Siemens PLC See video The machine is powered and available in our warehouse Test run possible

Stanje: novo, Fastech 3-Roller Round Bending Machine FRM 1050 x 90 Technical Specifications: Special features included in price: - Hardened rollers Podpfshzq Dbox Al Djrb - Motorized rear roller adjustment - Digital display Sheet width: 1050 mm Sheet thickness: max. 3.3 mm Sheet thickness (pre-bending): 3.0 mm Roller length: 1050 mm Roller diameter: 90 mm Minimum bending diameter: 130 mm Weight: 475 kg Dimensions (L x W x H): 1750 x 800 x 1130 mm Motor: 1.1 kW Equipment: - Upper and lower rollers electrically driven - Swing-out upper roller - Device for conical bending - Asymmetric roller arrangement - Self-braking main motor - Separate control and operator panel - Safety rope Values apply for St-37 / 240 N/mm² CE marking

Leto izdelave: 2009, stanje: rabljeno, Kompletna naprava za recikliranje kablov naprodaj – vključno z MG Recycling Compact 220T (odlično stanje) Naprodaj je kompletna naprava za recikliranje kablov (suhi postopek) za učinkovito pridobivanje bakra iz kablov. ⭐ Osrednja enota naprave: MG Recycling Compact 220T (leto 2009) * Industrijski kompaktni sistem za ločevanje bakra, aluminija in plastike * Zmogljivost: do 400 kg/h * Priključna moč: približno 37 kW * Visokokakovostna granulacija in ločevanje * Zelo robustna izvedba (približno 3,2 t teže stroja) ➡️ Preizkušen sistem za recikliranje kablov z visoko stopnjo čistosti in zanesljivim neprekinjenim obratovanjem. ⸻ ⚙️ Dodatne sestavine naprave: * Velika sejalna enota (TST – razslojevalna in sortirna tehnika) * Dodatna ločevalna miza za naknadno separacijo * Različni transportni trakovi in polžasti transporterji * Velik dvoosni drobilnik za predhodno drobljenje * Stroj za lupljenje kablov Komponente TST so posebej zasnovane za industrijske ločevalne in sejalne procese ter omogočajo zelo natančno razvrščanje in naknadno čiščenje materialov. ⸻ Tehnični podatki celotne naprave: * Prepustnost: ca. 200–300 kg kablov na uro (realno v praksi) * Izkoristek: do 99 % deleža bakra * Postopek: popolnoma suh (brez vode, brez blata) * Idealno za: * bakrene kable * elektronski odpad * mešane serije kablov ➡️ Zelo učinkovita naknadna obdelava zaradi dodatnih sejalnih in ločevalnih miz → maksimalni izkoristek! Predpfx Aljzgx H Hs Djb —————- Posebnosti: * Popolnoma usklajena proizvodna linija – takoj pripravljena za uporabo * Možnost razširitve / modularna zasnova * Popolno za profesionalne predelovalce kablov in reciklažna podjetja * Energetsko učinkovita ločilna tehnika brez odpadnih voda —————- Stanje & prodaja: * Naprava je v dobrem stanju in trenutno v obratovanju * Prodaja zaradi reorganizacije podjetja * Ogled po dogovoru možen —————- Cena: Po dogovoru – pričakujemo realne ponudbe

Stanje: zelo dobro (rabljeno), prostornina tovornega prostora: 54 m³, Leto izdelave: 2002, Hüffermann LL101s / Kotalni zabojnik 54 m³ / NA VOLJO 5 KOSOV • Proizvajalec: Hüffermann • Tip: LL101s • Leto izdelave: 2002 Prjdpfx Alowaap Ej Deb • Lastna teža: 3.900 kg • Dovoljena skupna teža: 15.000 kg • Nazivna prostornina: 54 m³ • Notranje mere: 7,4 m x 2,42 m x 2,95 m • Zunanje mere: 7,52 m x 2,55 m x 3,185 m • Dno: pločevina 3 mm S235 • Stranice: pločevina 3 mm S235 • Zadnja stran: pločevina 3 mm S235 • Vrata: dvodelna • Zunanja barva: RAL 1226

Stanje: dober (rabljeno), Leto izdelave: 1983, FGSH 50 TOS KURIM Milling Machine. Year of manufacture: 1983 (Czech Republic). Double-swivel head (new bearings, new gears). Beam for leveling with optical sight. Specifications: Table size: 630 x 1800 mm. Travel: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45-1400 rpm. Main motor power: 15 kW. Power requirement: 23 kW. Prodpodqp Euofx Al Djb Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 9.000 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna masa: 1.404 kg, vhodna napetost: 400 V, skupna širina: 2.950 mm, skupna dolžina: 922 mm, skupna višina: 2.000 mm, lastna masa: 1.404 kg, (Offer: price already reduced by 20%) Used water chiller, fully overhauled second-hand unit. - Brand: Carrier. Prodpfx Ajvpg Arjl Dsb - Water-to-water system, 162 kW (139,320 frigories). - Model: 30RW-160-A0178-PE. - Refrigerant gas: R407C. - Equipped with 4 scroll compressors and 2 water pumps. - Includes 2 plate heat exchangers. - Power consumption: 63 kW. - Unit has been serviced and filled with original refrigerant charge. - Reference: 1060 Only 9,000 compressor operating hours.