Uravnavanje valja

KOHLER 18.65-300.1

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Technical air supply: 8 bar. Rbsdjfmavxopfx Ad Tet More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Stanje: novo, Leto izdelave: 2023, Highly Efficient Series Production Clamping – Enter cutting dimension – Start. Automatic saws with feed are standard in efficient serial processing of bar and bundle materials. Maximum cutting range up to 290 x 320 mm. Equipment Automatic hydraulic sawing machine with NC control designed for cuts from 0° to 60° right, compliant with all CE safety standards The unit features 9 programs, each consisting of up to 99 individual steps, with a total of approximately 890 cutting positions and corresponding piece counter Function: Material feed, closing of fixed vice, blade rotation, distribution of emulsifiable fluid, bow descent until completion of the cut and return of the feed carriage to the set position, bow return and blade rotation stop via coolant distribution, cycle repetition Hydraulic feed, cut by cut, without length limitation Numeric control of quantity and cut length Hydraulic control unit with adjustable cutting pressure Blade tension is monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic band 3200 x 27 x 0.9 mm Kerf 1.2 mm Material feed stroke 600 mm Hydraulic power unit motor 0.75 kW Electric pump 0.09 kW for band cooling Rjdpfx Ajfww Sqed Tebt You are welcome to inspect the desired system at any time in our production/demo hall. Do not hesitate to contact us for more information. Plantec Maschinen GmbH

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Bending diameter – max. 36.0 mm steel Cutting thickness – max. 36.0 mm steel Motor speed: 1450 rpm Oil capacity: 32.0 l Motor: 380 Volt, 50 Hz Total power requirement: 5.5 kW Weight: 650 kg Dimensions (L x W x H): 1470 x 1200 x 1020 mm Redpfx Adjxabnts Tobt Demonstration machine – NEW (!!) Features: - Maximum performance, minimal energy consumption - Hydraulic combination machine for bending and cutting operations * Suitable for e.g. reinforcing steel or solid material - Bending mode with 3 different angle settings - Selectable manual and automatic modes - Simultaneous bending and cutting operations possible when the machine is running - “ECO mode”: Hydraulic pump operates only when the foot switch is activated - Free-moving foot switch - Instruction manual Technical data: - Steel 45 kg/mm²: Bending Ø 36.0 mm / Cutting Ø 36.0 mm * For 2 pieces: Steel 45 kg/mm²: Bending Ø 20.0 mm / Cutting Ø 24.0 mm - Steel 65 kg/mm²: Bending Ø 32.0 mm / Cutting Ø 32.0 mm * For 2 pieces: Steel 65 kg/mm²: Bending Ø 18.0 mm / Cutting Ø 20.0 mm - Steel 85 kg/mm²: Bending Ø 26.0 mm / Cutting Ø 28.0 mm * For 2 pieces: Steel 85 kg/mm²: Bending Ø 14.0 mm / Cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBUT136, ! Bargain Price ! Price starting from €1,150 R.Stahl Single-Girder Suspension Crane / Bridge Crane / Crane Runway / Workshop Crane / Gantry Crane Safe Working Load: 250 kg Rbodpfoigl R Rsx Ad Tjt 7 cranes available: 4: Steel Suspension Crane SWL 250 kg, width 6.35 m, gauge 5.6 m 5: Steel Suspension Crane SWL 250 kg, width 2.65 m, gauge 1.9 m 6: Steel Suspension Crane SWL 250 kg, width 4.85 m, gauge 4.35 m 7: Steel Suspension Crane SWL 250 kg, width 2.90 m, gauge 2.35 m 9: Steel Suspension Crane SWL 250 kg, width 6.0 m, gauge 5.5 m 10: Steel Suspension Crane SWL 250 kg, width 1.03 m, gauge 0.74 m (€1,150) 11: Steel Suspension Crane SWL 250 kg, width 1.65 m, gauge 1.25 m Gauge can be modified, end carriages are fastened with 8 bolts. Runway beams (IPE 200 – not included) Trolleys are adjustable to fit beam dimensions. Includes complete control equipment and pendant controller. All cranes have full electric travel on all three axes. Lift height/hook travel approx. 4 m Power supply: 400V, 16A, year of manufacture: 2003 Very good condition, systems were solely used for maintenance purposes – hardly used. Shipping by freight forwarder, collection preferred. Location: 75053 Gondelsheim For shipping rates by postal code, please inquire. We will provide you with a prompt and non-binding offer!

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation Redpfxjvuuais Ad Tjbt

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Rbsdjkvnumjpfx Ad Tjt Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, The Meisterturn 400 V is a high-quality conventional lathe from KNUTH’s range of universal lathes, distinguished by its impressive precision, modern ergonomics, and safety features. Equipped with an inverter, the machine achieves spindle speeds of up to 2,500 rpm. The integrated constant cutting speed function automatically adjusts the spindle speed to the diameter, allowing for machining results similar to those of CNC machines. This lathe is ideally suited for single-part and small-batch production, especially in toolmaking, jig and fixture construction, as well as for educational purposes. Its robust design and high-grade components ensure long service life and efficient operation. Outstanding features include a central lubrication system, precisely adjustable guideways, and an ergonomically designed control panel. If you are seeking a powerful and versatile solution in the category of conventional lathes, you can now order the Meisterturn 400 V online. Rodpfxoqzhhlo Ad Tjbt

Leto izdelave: 1991, Stanje: dober (rabljeno), številka stroja/vozila: 07282, Offer 22336 Technical specifications: - Max. working width: 3030 mm - Max. sheet thickness without prebending: 4 mm - Max. sheet thickness with prebending: 3 mm - 3 driven rollers - Roller diameter (top / bottom): 205 / 185 mm Rsdpfemdqllex Ad Tsbt - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Space requirements: approx. W 5500 x D 1400 x H 1300 mm - Weight: approx. 4.7 t - With prebending - Rear roller can be inclined - Swing-out bearing for pivoting the top roller - Extended roller ends for mounting profile rolls - Forward and reverse operation - Separate control panel

Leto izdelave: 2022, Stanje: novo, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm Scoring unit, tiltable, Extension table, Mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Tilting range: 0 - 45°, Cutting width at rip fence: 1,000 mm, Maximum cutting height: 87 mm, Maximum saw blade diameter: 315 mm, Mitre fence tilting range: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 HP / 4 kW, Scoring motor power: 0.5 HP / 0.37 kW, Working table height: 910 mm, Extraction port diameter: each 1 x 100 / 50 mm, Weight: 450 kg Rsdeihahmopfx Ad Tobt Large extraction hood Location: Available from stock 54634 Bitburg - immediately available - Location: Available from stock 54634 Bitburg - free loaded - - immediately available -

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Rjdpfxed Hxx As Ad Tobt Alimentation : 400 V, 50 Hz - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.