Laserski stroj za rezanje

TRUMPF TRUMPF TruLaser Cell 7040

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj ima 12300 vklopnih ur Gildemeister NEF 320 / cikel stružnica, leto izdelave 1999, vodenje Manual Plus, razdalja med konicama 750 mm, premer vrtenja nad ležiščem 320 mm, hitrost vretena do 4.000 vrt/min, 2 prestavi menjalnika, Multifix držalo za orodje, zadnji naslon, 2 luneti, dodatna oprema, Ihjdpfx Afjw Rm Tdj Tet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: Ihodpol Dw D Esfx Af Tet 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 20403, Angbot 25170 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 50 mm - Spindle taper: MT 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with intermediate gearbox: - Range 1: 60 – 210 rpm - Range 2: 210 – 765 rpm - Range 3: 120 – 420 rpm Ihsdpfswncaisx Af Tjt - Range 4: 420 – 1530 rpm - Throat depth: 330 mm - 3 automatic feed rates: 0.1 / 0.2 / 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance table to spindle: approx. 780 mm - Max. distance base plate (machined) to spindle: 1250 mm - Coolant system - Work light - Machine vice - Assorted 10 pcs. HSS drills - Power supply: 400 V / 2.6 / 4 kW - Space requirement: approx. W 720 x H 2050 x D 1150 mm - Weight: approx. 350 kg

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Required space: approx. 3.6 x 3.5 m As a global leader in Kellenberger overhauls/retrofits, we are able not only to deliver machines in as-new quality with warranty, but also to provide comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - Repainted Electrical overhaul: - New modern CNC cylindrical grinding machine control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical cables, limit switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (on B axis) Standard equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper, optionally with fine adjustment - Grinding spindle head T1 / T2 / T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW Ihedpfeuwv H Tox Af Tjt - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Optional extras at additional cost: - HF internal grinding spindle - High-precision, maximum rigidity workhead - Measuring control - Extraction unit - Paper band filter Control system: Basic grinding cycles: - Zero-setting workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B axis swivelling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles: - Profile plunge grinding, external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single- and multi-thread external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-round grinding, external and internal Price: 15,000

Leto izdelave: 1976, Stanje: dober (rabljeno), Bandwidth: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Ihedjbh Ubwopfx Af Tot Coil weight: 12.5 t Mandrel Ø: 508 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive combined with linear direct drives - Enclosed beam guidance via fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit with fully adaptive lens system - Single-cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: Height control and sheet metal edge detection Control - Advanced shop floor programming (TruTops via network access) - Fast reproduction - 17" touch color display - Integrated technology data - Automatic shutdown - Programmable cutting gas/-pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Tele-service via internet - Integrated e-shop Iodpfexw Uryjx Af Teht Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special equipment: • 3001 on TruDisk 4001 • Extended pallet drawer • Dust protection cover plate • Viewing window left • Viewing windows right side • Storage interface • BrightLine Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Stanje: rabljeno, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centers: 1000 mm Center height: 175 mm Swiveling grinding head (B-axis): 360° (1° increments) 2 external grinding wheels 1 internal grinding wheel Ihsdjwim U Hopfx Af Tst External grinding wheel: 400 mm x 40 mm x 127 mm Overhauled spindle > see photos Tailstock Morse taper 4 (MT 4) 0–1000 RPM CNC control: Fanuc Programming: Pictogramming Heidenhain linear encoders The machine is available for inspection under power at our warehouse in Gussago (BS), Italy.

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna višina: 47.000 mm, skupna širina: 27.000 mm, skupna dolžina: 25.000 mm, širina mize: 1.000 mm, dolžina mize: 1.800 mm, skupna masa: 43.000 kg, širina plošče bata: 600 mm, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation Iodjtiwgijpfx Af Teht

Stanje: novo, Number of drawers: 9 pcs Dimensions (L x W x H): 1,360 x 460 x 950 mm Net weight: 115 kg Drawer cabinet Drawer 1 dimensions: 1245 x 400 x 100 mm (W x D x H) Iodpfx Afju Imqkj Tsht Drawers 2 to 5 dimensions: 565 x 400 x 60 mm (W x D x H) Drawer 6 dimensions: 565 x 400 x 140 mm (W x D x H) Drawers 7 and 8 dimensions: 310 x 370 x 530 mm (W x D x H) Worktop thickness: 40 mm External dimensions of stackable boxes: 105 x 135 x 75 mm (W x D x H) External dimensions of waste bin: 255 x 320 x 380 mm (W x D x H)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, laserska moč: 3.000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber Max. Working Area (X x Y x Z, mm): 800 x 600 x 400 Control: TRUMPH HMI based on Sinumerik 840 D solution line Laser Power: 3,000 W Operating Hours: 31,875 h Laser Beam On Time: 3,286 h Machine Features - High-dynamic, precision CNC laser machine - Machine bed made from mineral cast - Cantilever axis system - Travel range 800 x 600 x 400 mm - X-Y axes with linear direct drives Ihodpsxur Iasfx Af Tet - Absolute measuring system with glass scales - Z-axis with linear guide and ball screw drive - Panel PC for process monitoring - Integrated electrical cabinet and water-air chiller Safety Housing Active - Active, sensor-monitored laser safety system, Laser Safety Class 1 for laser powers > 1,000 - 8,000 W - Automatic vertical door with personnel protection - Double-walled side safety doors - Protective window Technology Package CutLine Professional - Cutting process adapter with gas supply - FocusLine (focus diameter) - ControlLine - Digital camera system for process monitoring Cutting Optics Adjustment Device - For aligning the cutting optics with the laser beam Technology Package WeldLine - Welding function with FocusLine Professional - Welding gas supply for 3 gases Process Adapter Welding f150 Crossjet - Swivel axis for focusing optics - Torque axis for 3D-processing with direct measuring system - Optics swivel angle ± 135° - Clamping frame with fixture bridge set - Modular system for mounting workpiece holders, height adjustable 640–940 mm - 1x short and 1x long fixture bridge 2D Cutting Table 800 x 600 mm - For cutting sheets up to 6 mm thick - C180 rotary axis for processing rotationally symmetric components - 3-jaw chuck d=125 Status lights Multi-touch control unit Dust Extractor MF-L1000 - External extraction system with a volume flow of 1,000 m³/h - Filter system with automatic cleaning - Power supply and control via laser machine Function Control MF-L1000 - Reactive safety system for fire detection and suppression TruDisk 3001 - TruDisk 3001 Laser Unit (4 C) - Diode-pumped disk laser with beam quality of 4 mm mrad - Laser power: 3,000 W at the workpiece Includes: - Laser with 1 cavity - Integrated laser supply and real-time capable control for evaluation and visualization of operating data - Fast laser power control - TruControl 1000 control: - Real-time OS CPU - 2x USB interfaces - 24x digital I/O interfaces, configurable as real-time - Expandable with fieldbus interfaces - Memory capacity for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control unit - Safety monitoring according to Laser Safety Class 1 incl. central safety lock - Housing for max. 4 laser outputs - Protection class: IP54 Control Panel OP84 - Detachable operator panel for laser unit control - 8.4" touchscreen with rotary-push knob - Buttons: Emergency stop, Power On-Off Beam Delivery includes: - Optics assembly for 1 laser light cable D - Central safety interlock - Switching time 50ms - Output 1 with 100% safety interlock - Pilot laser for each laser light cable output incl. electronic activation Cooling Unit